non port: misc/gkx86info2/Makefile |
SVNWeb
|
Number of commits found: 26 |
Thu, 2 Mar 2023
|
[ 05:23 Tobias C. Berner (tcberner) ] fa81a4f (Only the first 10 of 1168 ports in this commit are shown above. )
accessibility/at-spi2-core: update to 2.46.0
What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
interface.
What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).
What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments. (Only the first 15 lines of the commit message are shown above )
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] b832da1 (Only the first 10 of 349 ports in this commit are shown above. )
misc: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron Dalton <aaron@FreeBSD.org>
* Adam Weinberger <adam@vectors.cx>
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan E <alane@FreeBSD.org>
* Alex Semenyaka <alex@rinet.ru>
* Alex Stangl <alex@stangl.us>
* Alexander Logvinov <avl@FreeBSD.org>
* Alexander Logvinov <ports@logvinov.com>
* Alexander Nusov <alexander.nusov@nfvexpress.com>
* Alexander Timoshenko <gonzo@univ.kiev.ua> (Only the first 15 lines of the commit message are shown above )
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Fri, 8 Nov 2019
|
[ 14:06 tobik ] (Only the first 10 of 21 ports in this commit are shown above. )
misc: Add missing USES=gnome
|
Fri, 1 Apr 2016
|
[ 14:16 mat ] (Only the first 10 of 2612 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
Thu, 31 Dec 2015
|
[ 01:17 amdmi3 ]
- Add LICENSE
- Remove unneeded eval's
- Switch to options helpers
|
Thu, 12 Jun 2014
|
[ 22:44 pawel ]
Add staging support
|
Fri, 21 Feb 2014
|
[ 13:38 ehaupt ] (Only the first 10 of 16 ports in this commit are shown above. )
Remove trailing whitespaces from category misc
|
Mon, 10 Feb 2014
|
[ 13:54 ehaupt ] (Only the first 10 of 581 ports in this commit are shown above. )
According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.
This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.
Approved by: portmgr (bapt)
|
Fri, 20 Sep 2013
|
[ 20:50 bapt ] (Only the first 10 of 491 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
misc)
|
Tue, 23 Apr 2013
|
[ 14:20 bapt ] (Only the first 10 of 407 ports in this commit are shown above. )
Finish converting the whole ports tree to USES=pkgconfig
|
Sun, 17 Feb 2013
|
[ 13:22 pawel ]
- Fix build on amd64 [1]
- Convert to OptionsNG
- Trim Makefile header
PR: ports/175450 [1]
Submitted by: Lawrence Chen <lchen@zen.lhaven.homeip.net> [1]
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
Tue, 28 Sep 2010
|
[ 05:42 pgollucci ]
- Reset Tobias Roth <ports@fsck.ch> due to lack of time
by his request to ports@
Thanks for your work!
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
Fri, 6 Jun 2008
|
[ 13:45 edwin ] (Only the first 10 of 134 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
Mon, 24 Mar 2008
|
[ 17:02 miwi ] (Only the first 10 of 63 ports in this commit are shown above. )
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION
Approved by: portmgr (xorg cleanup)
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
Sat, 5 Nov 2005
|
[ 05:22 marcus ] (Only the first 10 of 1045 ports in this commit are shown above. )
Bump PORTREVISION to chase the glib20 shared library update.
|
Sat, 12 Mar 2005
|
[ 10:54 marcus ] (Only the first 10 of 911 ports in this commit are shown above. )
Bump PORTREVISION to chase the glib20 shared lib version change.
|
Sat, 8 Jan 2005
|
[ 10:52 krion ]
Define ONLY_FOR_ARCHS=i386.
PR: ports/75876
Submitted by: maintainer
|
Thu, 23 Dec 2004
|
[ 09:41 edwin ]
[New Port] misc/gkx86info2 - GKrellM2 plugin printing current clock speed
GKrellM2 plugin that simply prints the current clock speed
PR: ports/68919
Submitted by: Tobias Roth <ports@fsck.ch>
|
Number of commits found: 26 |