non port: misc/latex-mk/Makefile |
SVNWeb
|
Number of commits found: 42 |
Mon, 19 Dec 2022
|
[ 14:44 Muhammad Moinur Rahman (bofh) ] 721e577 (Only the first 10 of 130 ports in this commit are shown above. )
Mk/**tex.mk: Convert bsd.tex.mk to USES=tex
- Update all the consumers to use USES=tex
- USE_TEX=yes is the old way of writing USES=tex which has been removed
and replaced in all ports
- Almost all of the USE_TEX features remains unchanged
- Some consumers had the same variables defined both in the mk
infrastructure and also in the ports which have been removed from the
ports as those are redundant.
In case any of the consumers are failing to build please make sure that
the nexessary USES=tex is there. Unlike previous USE_TEX=yes will no
longer load the required VARS for tex and related dependencies.
Reviewed by: portmgr
Approved by: portmgr (blanket)
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] b832da1 (Only the first 10 of 349 ports in this commit are shown above. )
misc: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron Dalton <aaron@FreeBSD.org>
* Adam Weinberger <adam@vectors.cx>
* Adam Weinberger <adamw@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan E <alane@FreeBSD.org>
* Alex Semenyaka <alex@rinet.ru>
* Alex Stangl <alex@stangl.us>
* Alexander Logvinov <avl@FreeBSD.org>
* Alexander Logvinov <ports@logvinov.com>
* Alexander Nusov <alexander.nusov@nfvexpress.com>
* Alexander Timoshenko <gonzo@univ.kiev.ua> (Only the first 15 lines of the commit message are shown above )
|
Sat, 24 Jul 2021
|
[ 20:24 Po-Chuan Hsieh (sunpoet) ] cf7f062
misc/latex-mk: Add NO_ARCH
Approved by: portmgr (blanket)
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Sat, 10 Nov 2018
|
[ 18:12 bapt ] (Only the first 10 of 386 ports in this commit are shown above. )
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
|
Fri, 1 Apr 2016
|
[ 14:16 mat ] (Only the first 10 of 2612 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
Sun, 14 Sep 2014
|
[ 19:26 hrs ]
- Add LICENSE_FILE.
- Remove texinfo from RUN_DEPENDS.
|
Sun, 31 Aug 2014
|
[ 21:27 adamw ]
USES=makeinfo broke the build here. This port requires texi2dvi, and
USES=makinfo will only bring it in on -current. Fix this by partially
reverting 366590 and adding back the dependencies on print/texinfo.
While here, correct the LICENSE.
|
Sat, 30 Aug 2014
|
[ 07:14 hrs ]
- STAGEDIR support.
- Use makeinfo.
PR: 193139
|
Thu, 24 Jul 2014
|
[ 15:36 bapt ] (Only the first 10 of 41 ports in this commit are shown above. )
Reset maintainership for ports not staged with no pending PR
With hat: portmgr
|
Mon, 7 Jul 2014
|
[ 15:31 olgeni ] (Only the first 10 of 193 ports in this commit are shown above. )
Remove indefinite articles and trailing periods from COMMENT, plus minor
COMMENT typos and surrounding whitespace fixes. A few Makefiles where not
included as they contain Latin-1 characters that break the Phabricator
workflow. Category M.
CR: D306
Approved by: portmgr (bapt)
|
Mon, 26 May 2014
|
[ 12:16 miwi ] (Only the first 10 of 15 ports in this commit are shown above. )
- Convert gmake, bzip2 to USES
Approved by: portmgr
|
Fri, 20 Sep 2013
|
[ 20:50 bapt ] (Only the first 10 of 491 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
misc)
|
Sat, 11 May 2013
|
[ 17:58 hrs ] (Only the first 10 of 152 ports in this commit are shown above. )
Rectify USE_TEX to support both of teTeX and TeXLive.
TEX_DEFAULT:
A knob to choose teTeX or TeXLive. One can specify in /etc/make.conf.
USE_TEX:
A knob for port developers. Valid keywords are listed in
bsd.tex.mk.
|
Mon, 6 May 2013
|
[ 02:00 hrs ] (Only the first 10 of 150 ports in this commit are shown above. )
Remove *_DEPENDS from ports which depend on teTeX and add USE_TEX=tetex
instead to make migration to TeXLive easier.
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
Sat, 18 Jun 2011
|
[ 16:13 hrs ]
- Use print/texinfo for texi2{dvi,pdf} instead of print/teTeX-base.
- Use print/teTeX-base for latex instead of print/teTeX.
- Use share/texmf for TeX-related files instead of share/texmf-local.
|
Wed, 8 Jun 2011
|
[ 16:52 jlaffaye ] (Only the first 10 of 24 ports in this commit are shown above. )
Update my e-mail to my FreeBSD one.
While I am here, use GOOGLE_CODE instead of ${MASTER_SITE_GOOGLE_CODE}
Approved by: bapt (mentor)
|
Mon, 2 May 2011
|
[ 12:44 makc ] (Only the first 10 of 195 ports in this commit are shown above. )
Bump PORTREVISION after open-mofit update
|
Mon, 10 Jan 2011
|
[ 00:49 wen ]
- Update to 2.1
PR: ports/153765
Submitted by: Julien Laffaye <kimelto@gmail.com> (maintainer)
|
Wed, 28 Jul 2010
|
[ 13:48 arved ]
Update to 2.0
PR: 148874
Submitted by: maintainer
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
Wed, 2 Sep 2009
|
[ 15:01 amdmi3 ] (Only the first 10 of 130 ports in this commit are shown above. )
- Retire MASTER_SITE_SOURCEFORGE_EXTENDED, it's no longer needed - all mirrors
actually have all distfiles
- Merge all SF mirrors to MASTER_SITE_SOURCEFORGE, resort according to quick
download speed survey
- Fix MASTER_SITES for all port that have used SOURCEFORGE_EXTENTED
Approved by: portmgr (pav)
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
Mon, 4 May 2009
|
[ 18:38 miwi ]
- Pass maintainership to kimelto (at) gmail.com
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
Tue, 28 Aug 2007
|
[ 10:10 miwi ]
- Update to 1.9.1
|
Sat, 16 Jun 2007
|
[ 09:56 miwi ]
- Update to 1.9
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
Sun, 8 Oct 2006
|
[ 13:00 miwi ]
- Update to 1.8
|
Wed, 14 Jun 2006
|
[ 14:44 miwi ]
Update to 1.7
Change Mail to miwi@
Approved by: krion (mentor)
|
Mon, 1 May 2006
|
[ 14:19 pav ]
- Update to 1.6
- Take maintainership
PR: ports/96560
Submitted by: Martin Wilke <freebsd@unixfreunde.de>
|
Tue, 18 Oct 2005
|
[ 13:07 hq ]
- Update to 1.4
- Add 'print' category
- Add $FreeBSD$ tag in pkg-plist
|
Tue, 12 Apr 2005
|
[ 03:26 obrien ] (Only the first 10 of 773 ports in this commit are shown above. )
At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.
|
Mon, 11 Apr 2005
|
[ 08:04 obrien ] (Only the first 10 of 776 ports in this commit are shown above. )
Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.
|
Sun, 16 Jan 2005
|
[ 10:21 krion ]
Update to version 1.3
PR: ports/76282
Submitted by: Ports Fury
|
Tue, 13 Apr 2004
|
[ 07:06 vs ]
Update to 1.2: http://latex-mk.sourceforge.net/news.html#20040321
PR: 65375
Submitted by: Herve Quiroz
Approved by: linimon (mentor)
|
Fri, 5 Sep 2003
|
[ 15:18 erwin ]
Update to 1.1
PR: 56445
Submitted by: Herve Quiroz <herve.quiroz@esil.univ-mrs.fr>
|
Sun, 1 Jun 2003
|
[ 04:40 ijliao ]
typo
|
Thu, 22 May 2003
|
[ 06:27 ijliao ]
add latex-mk 1.0
A collection of makefile and scripts for LaTeX documents
|
Number of commits found: 42 |