Number of commits found XX: 81

Add USES=xorg USES=gl, ports categories m

Add USES=xorg and USES=gl to ports in categories starting with 'm'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

Remove WANT_GNOME and HAVE_GNOME.

Approved by:	bapt kwm
Sponsored by:	Absolight
Differential Revision:	  https://reviews.freebsd.org/D12643

- fix warnings
- make portlint happier

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

- remove BROKEN
- fix dependecies
- option FREETYPE is no longer default
- option FREETYPE and XFT now conflicting

Update freetype2 to 2.6.2. [1]

Mark magicpoint broken, maintainer is notified.

Exp-runs run by antoine@

This version also fixes shadowing of TYPEOF in ftconfig.h [2]

PR:		203554 [1], 202083 [2]
Submitted by:	rhurlin@gwdg.de [2]

Update giflib to 5.1.1

PR:		204492

- cleanup

- Switch to options helpers
- While here, add some NO_ARCHes and couple missing PORT_OPTIONS=DOCS

Approved by:	portmgr blanket

Update graphics/giflib to 5.0.5

Differential Revision:	https://reviews.freebsd.org/D1361
Submitted by:	bapt
Reviewed by:	self
Exp-run by:	self

- Add missing run dependency on perl
- Fix shebangs
- Allow building with either giflib 4.2 or 5.0

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

Remove non default option on imlib

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

(Only the first 15 lines of the commit message are shown above )

Add LICENSE

graphics/imlib:
- Remove :oldver from USES=libtool and bump dependent ports

print/freetype:
- Remove old libtool patch
- Remove :oldver from USES=libtool and bump dependent ports

- enable option GIF per default

Add DOCS to OPTIONS_DEFINE to ports that check for PORT_OPTIONS:MDOCS.

Remove indefinite articles and trailing periods from COMMENT, plus minor
COMMENT typos and surrounding whitespace fixes. A few Makefiles where not
included as they contain Latin-1 characters that break the Phabricator
workflow. Category M.

CR:		D306
Approved by:	portmgr (bapt)

- remove broken MANPREFIX

- cleanup

Fix build with freetype 2.5.2.

I forgot this in the big update yesterday.

- update LIB_DEPENDS
- use OPT_USE

- use prefixed DEPENDS and CONFIGURE
- fix build warnings

- add iconv for option XFT

misc/magicpoint: USES+= pkgconfig

Approved by:	portmgr (bapt, implicit)

- fix misplaced NO_STAGE in slaveports and ifdefs

Add NO_STAGE all over the place in preparation for the staging support (cat:
misc)

- fix segfault on 64bit with option XFT

Two imake related changes:

1) Move -a from XMKMF command variable to a new XMKMF_ARGS variable.
   For ports that don't need -a introduce USES=imake:notall.
   This way ports no longer have to redefine XMKMF.

2) xmkmf -a runs imake with the flags in IMAKECPPFLAGS as extra arguments
   to set CPP, CC and CXX.  This creates the top Makefile, and then xmkmf
   runs make Makefiles.  This Makefiles target runs imake for each
   subdirectory but these imake invocations did not have the flags from
   IMAKECPPFLAGS so the resulting makefiles used the wrong C preprocessor
   when clang is used (/usr/bin/cpp instead of /usr/local/bin/tradcpp).
   Instead of letting xmkmf pass IMAKECPPFLAGS from the environment to
   imake let imake handle IMAKECPPFLAGS itself just like it handles
   IMAKEINCLUDE.

   This exposed configure errors in x11-clocks/mouseclock and x11-wm/fvwm.

Approved by:	portmgr (bapt)

Fails to build with -j24

- add LATE_INSTALL_ARGS in favor of imake.mk

- fix build after USES=imake

New USES imake to handle the dependency on imake.

This uses accept 'env' as an argument for ports that do use their own or a
different do-configure target.

Modify xmkmf so it accept IMAKECPPFLAGS as default flags for imake and pass it
to the called imake.
Modify xorg-cf-files (the FreeBSD.cf configuration file) to allow CppCmd to be
overwritten.
Pass CppCmd CcCmd and CplusplusCmd via command line to each call of imake via
IMAKECPPFLAGS
Pass IMAKE_DEFINE with the above arguments to MAKE_ARGS so that imake spawned
from Makefile generated by a previous
imake also inherit the defined CppCmd CcCmd and CplusplusCmd.
Make imake use devel/tradcpp all the time, so that when buidling with clang we
do not depend on gcc's cpp.
Make imake respect CC and CXX
Make imake respect USE_GCC (if set imake will use gcc's cpp).

While here:
- Remove a couple of indefinite articles from comments
- Trim headers
- Fix a couple of ports to build with clang or use: USE_GCC=any
- Fix a now useless redefinition of the extraction chain
- Fix a typo in japanese/Wnn7-lib bundled imake template definitions
- Fix some XMKMF execution with no env specified
- Use options helper in x11/xautolock to simplify the port

Fix typo

Reported by:	danfe

In preparation of the removal of USE_FREETYPE from bsd.port.mk: remove
USE_FREETYPE from all ports using it

While here trim some headers, and do some conversion to new options framework.

- cleanup header
- strip shlibversion in depedency

- use OPTIONS_DEFINE

- fix LIB_DEPENDS

- fix build with giflib
- improve OPTIONS

- update png to 1.5.10

- fix build for png-1.4.1
Reported by:    QA Tindy

- set --enable-locale for word wrapping under iso8859-1 and similar

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- fix support for freetype

- update to jpeg-8

- update to giflib

- drop USE_FREETYPE

Convert most of remaining ports that depend on xorg-libraries to
modular xorg.

- supply corresponding USE_XORG for all imake-using ports that need it
- USE_IMAKE no longer implies USE_XLIB in absence of USE_XORG
- retire USE_X_PREFIX which is not really used anywhere after the
  above change
- a few minor nits like whitespace and SF macro

Tested by:      2 tinderbox runs by pav
Approved by:    portmgr (pav)

Remove japanese/magicpoint and merge Japanese character support
into misc/magicpoint.  The Japanese support is now based on
FreeType library, not VFlib, as the non-Japanese vector font support is.

Approved by:    dinoex (maintainer)

- update to 1.13a
  fixes problems when using gradiation
- make portlint happier
- take maintainership

- Fix plist for NOPORTDOCS case, use DOCSDIR

Reported by:    QAT

Reset mita@FreeBSD.org due to no commits for 5 months and maintainer-timeouts.

Hat:            portmgr

Maintaine's update to the latest release
Pointed out by Julian Stacey

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Remove USE_REINPLACE from ports starting with M

Remove the usage of 'misc' as a secondary category.

Hat:            portmgr

Upgrade X.Org ports to 6.8.2.
Release notes are available at
http://www.x.org/X11R6.8.2/doc/RELNOTES.html

Thanks to kris and krion for running several cluster test builds,
maintainers of GNOME for prompt responses, portmgr for postponing ports
freeze for this update, testers on FreeBSD-X11@ list and others that I
might have mised here.

Also included:
- fix for ATI Mobility on Dell Inspiron 7500 (obtained from Marc Aurele La
  France; obtained and tested by julian)
- fix for kbd driver on Sparc64 (tested by Aaron Dudek, Michael G. Jung and
  Matthias Muthmann), which still appears to have problems with some
  keyboards - so
- fix for kbd driver on PC98 (reported and tested by NAKAJI Hiroyuki; PR
  ports/77217)
- fix for i810 on HP D530 (obtained from Egbert Eich; obtained and tested
  by Anders Nor Berle; PR ports/74757)

unbreak magicpoint and update to 1.11b

PR:             ports/78300 ports/78395
Submitted by:   Joerg Pulz <Joerg.Pulz@frm2.tum.de>

BROKEN: Incomplete pkg-plist

Back out the previous change.  Mita-san will continue to
work as the maintainer of this port.

Discussed with: mita and nork

Reset MAINTAINER to ports@.
We cannot contact them for a long time.

Discussed with: hrs
Approved by:    kiri(blanket), mita(blanket),
                shige(blanket), taoka(blanket)

- Update to the latest version.
- Reported to solve problem with xorg server.

Submitted by:   Ted Fabe
Reviewed by:    Maintainer (mita)

- Add the X_WINDOW_SYSTEM={xorg,xfree86-4,xfree86-3} variable to bsd.port.mk,
  and make XFREE86_VERSION map to it.  XFREE86_VERSION is now deprecated.
- Make xorg the default X_WINDOW_SYSTEM on -current.
- Add several new X_*_PORT variables which point to various pieces of X11 based
  on the setting of X_WINDOW_SYSTEM, and make ports use them.
- Add information to CHANGES about how to handle the transition.

PR:             ports/68763
Approved by:    portmgr (marcus)
Approved by:    re (scottl)

Fix build with freetype.

PR:             ports/68012
Submitted by:   Yoshiaki Uchikawa <yoshiaki@kt.rim.or.jp>
Apporved by:    mita (blanket)

Update to 1.10a.

PR:             ports/62326
Submitted by:   AMAKAWA Shuhei <sa264@cam.ac.uk>
Apporved by:    mita (blanket)

Fix build on 5.x.

Spotted by:     Ted Lindgreen <ted@sanne.nlnetlabs.nl>
Approved by:    portmgr (marcus)

Destroy pkg-comment for some of the stranger uses in the tree,
pending the final semi-automatic purge.

Approved by:    portmgr (implicitly)

To catch up the latest version    

Bump png major    

Depends on pnmscale which is in the netpbm port.    

fix build error.    

Compilation failure problem under XFree86 version 3 is solved.    

Added HTML manual    

add XFREE86_HTML_MAN= no    

(1) Add new variable, XFREE86_VERSION, to specify which version of       XFree86
(3 or 4) to depend to when USE_XLIB is set.       XFREE86_VERSION defaults to 3
for now, but adventurous users can       override it in /etc/make.conf.  When
XFREE86_VERSION=3, USE_XLIB       will add a dependency to x11/XFree86; when it
is set to 4, the       dependency will be to x11/XFree86-4-libraries.  When     
 XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS       hacks
to avoid messing with XFree86 are turned off.    

Bump png shared library version.    

Add png.3 into LIB_DEPENDS. Also slightly reorder Makefile while I here  
(separate definitions from targets).    

Update to 1.07a.    

Number of commits found XX: 81

12 vulnerabilities affecting 102 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2021-01-18 08:22:15