notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
All times are UTC
Ukraine
non port: misc/pspresent/Makefile
SVNWeb

Number of commits found: 17

Wed, 7 Sep 2022
[ 21:10 Stefan E├čer (se) search for other commits by this committer ]    commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  b7f0544  (Only the first 10 of 27931 ports in this commit are shown above. View all ports for this commit)
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 20 Jul 2022
[ 14:22 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:b832da1849e4bcfff05da62c69ee4a556e83d2d1  commit hash:b832da1849e4bcfff05da62c69ee4a556e83d2d1  commit hash:b832da1849e4bcfff05da62c69ee4a556e83d2d1  b832da1  (Only the first 10 of 349 ports in this commit are shown above. View all ports for this commit)
misc: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam Weinberger <adam@vectors.cx>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan E <alane@FreeBSD.org>
  *  Alex Semenyaka <alex@rinet.ru>
  *  Alex Stangl <alex@stangl.us>
  *  Alexander Logvinov <avl@FreeBSD.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Nusov <alexander.nusov@nfvexpress.com>
  *  Alexander Timoshenko <gonzo@univ.kiev.ua>
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Tue, 6 Apr 2021
[ 14:31 Mathieu Arnold (mat) search for other commits by this committer ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148  (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Wed, 6 Nov 2019
[ 18:07 zeising search for other commits by this committer ] Original commit   Revision:516916 (Only the first 10 of 117 ports in this commit are shown above. View all ports for this commit)
Add USES=xorg USES=gl, ports categories m

Add USES=xorg and USES=gl to ports in categories starting with 'm'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
Thu, 24 Mar 2016
[ 15:47 tijl search for other commits by this committer ] Original commit   Revision:411798 (Only the first 10 of 95 ports in this commit are shown above. View all ports for this commit)
Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)
Sat, 22 Aug 2015
[ 17:48 hrs search for other commits by this committer ] Original commit   Revision:395047 (Only the first 10 of 354 ports in this commit are shown above. View all ports for this commit)
- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Thu, 16 Jul 2015
[ 20:53 kwm search for other commits by this committer ] Original commit   Revision:392322 (Only the first 10 of 89 ports in this commit are shown above. View all ports for this commit)
Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938
Sun, 8 Jun 2014
[ 16:16 vanilla search for other commits by this committer ] Original commit   Revision:357051
Stagify.
Fri, 20 Sep 2013
[ 20:50 bapt search for other commits by this committer ] Original commit   Revision:327745 (Only the first 10 of 491 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
misc)
Wed, 14 Aug 2013
[ 22:35 ak search for other commits by this committer ] Original commit   Revision:324744 (Only the first 10 of 1725 ports in this commit are shown above. View all ports for this commit)
- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)
Sun, 17 Jun 2012
[ 20:18 sylvio search for other commits by this committer ] Original commit 
- Update MASTER_SITES and WWW: line
- Support CC/CFLAGS properly
- Add LICENSE
- Add MAKE_JOBS_SAFE

PR:             ports/169004
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>
Fri, 1 Jun 2012
[ 05:26 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4371 ports in this commit are shown above. View all ports for this commit)
- update png to 1.5.10
Tue, 20 Dec 2011
[ 05:20 tabthorpe search for other commits by this committer ] Original commit 
- Reassign to the heap do to mail bounce

<timbob@bigpond.com>: host extmail.bigpond.com[61.9.168.122] said: 550 5.1.1
   <timbob@bigpond.com> recipient rejected. IB603a (in reply to RCPT TO
   command)

Final-Recipient: rfc822; timbob@bigpond.com
Original-Recipient: rfc822;timbob@bigpond.com
Action: failed
Status: 5.1.1
Remote-MTA: dns; extmail.bigpond.com
Diagnostic-Code: smtp; 550 5.1.1 <timbob@bigpond.com> recipient rejected.

With hat:       portmgr
Sun, 28 Mar 2010
[ 06:47 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4470 ports in this commit are shown above. View all ports for this commit)
- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi
Fri, 5 Feb 2010
[ 11:46 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4271 ports in this commit are shown above. View all ports for this commit)
- update to jpeg-8
Sat, 19 Apr 2008
[ 17:56 miwi search for other commits by this committer ] Original commit  (Only the first 10 of 2842 ports in this commit are shown above. View all ports for this commit)
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)
Sun, 29 Jul 2007
[ 20:41 pav search for other commits by this committer ] Original commit 
pspresent is a presentation tool to display full-screen PostScript
presentations. It provides simple navigation, and double-buffers for
seamless transitions.

WWW: http://www.cse.unsw.edu.au/~matthewc/pspresent

PR:             ports/114887
Submitted by:   Timothy Bourke <timbob@bigpond.com>

Number of commits found: 17