20:13 antoine 

Deprecate a few python 2.7 ports

With hat:	portmgr

 

13:59 tobik 

multimedia: Add missing USES={gl,gnome,sdl,xorg}

 

17:05 mat 

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

 

11:10 antoine 

Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

19:52 tijl 

Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

 

14:16 mat 

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

 

12:51 tijl 

Set PORTSCOUT on gstreamer ports

 

17:22 mva 

- Convert ports of multimedia/ to new USES=python

Approved by:	portmgr (implicit)

 

20:03 kwm 

Add missing /libs in LDFLAGS, this should fix the build in some cases.

While here, remove PTHREAD_* from CPPFLAGS and LDFLAGS.

PR:		192432
Submitted by:	sascha@root-login.org (PR), troyax@pholos.eu (fix)

 

19:40 tijl 

- USES=libtool tar:bzip2
- Add INSTALL_TARGET=install-strip
- Remove references to PTHREAD_CFLAGS and PTHREAD_LIBS

 

18:28 zeising 

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

 

20:10 antoine 

Fix paths inside .py[co] files

 

21:00 rene 

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

 

19:09 kwm 

Unbreak packaging after staging this port.
I'm not sure how this snuck by testing.

 

22:15 kwm 

Stagify, update comment and switch to USES.

 

17:05 kwm 

Restrict python to -2.7

Submitted by:	mva@

 

20:57 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
multimedia)

 

14:20 bapt 

Finish converting the whole ports tree to USES=pkgconfig

 

21:58 bapt 

Use build-only dependency on pkgconf
Trim headers

 

05:26 dinoex 

- update png to 1.5.10

15:26 miwi 

- Remove WITH_FBSD10_FIX, is no longer needed

10:05 kwm 

Update to 0.10.22.

16:31 kwm 

Fix build on FreeBSD 10
While here move LICENCE* block to please portlint.

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

11:05 kwm 

Update to 0.10.21.

Depend on py-gobject instead of py-gtk2

16:11 kwm 

Update to 0.10.20.

Release notes: http://gstreamer.freedesktop.org/releases/gst-python/0.10.20.html
With hat:       multimedia@

16:13 kwm 

Update to 0.10.19.

Add license.
Release notes: http://gstreamer.freedesktop.org/releases/gst-python/0.10.19.html

13:35 kwm 

Update to 0.10.18.

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

12:59 kwm 

Update to 0.10.16.

Changelog:     
http://gstreamer.freedesktop.org/releases/gst-python/0.10.16.html.

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

20:35 kwm 

Fix build on 6.x.

Submitted by:   Pointyhat (pav), brian@

16:16 kwm 

Update to 0.10.15.

Release notes: 
http://gstreamer.freedesktop.org/releases/gst-python/0.10.15.html

23:36 kwm 

Update to 0.10.14.

Release notes:
http://gstreamer.freedesktop.org/releases/gst-python/0.10.14.html

05:22 marcus 

Presenting GNOME 2.24 for FreeBSD.

See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes.  On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs.  The documentation updates
to the website are forthcoming.

This release features commits by adamw, ahze, kwm, mezz, and myself.  It would
not have been possible without are contributors and testers:

Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen
Joseph S. Atkinson
Kris Moore
Lapo Luchini [7]
Nikos Ntarmos
Pawel Worach
Romain Tartiere
TAOKA Fumiyoshi [3]
Yasuda Keisuke
Zyl
aZ [4]
bf [2] [5]
Florent Thoumie
Peter Wemm
pluknet

PR:             125857 [1]
                126993 [2]
                130031 [3]
                127399 [4]
                127661 [5]
                124302 [6]
                129570 [7]
                129936
                123790

03:33 ahze 

Update to 0.10.12

13:48 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

17:56 miwi 

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

03:50 marcus 

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

23:31 ahze 

Update to 0.10.8

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

22:28 ahze 

Update to 0.10.7

05:57 mezz 

- Update to 0.10.6.
- Make it prefix-clean by PYTHON_SITELIBDIR -> PYTHONPREFIX_SITELIBDIR, that
  will fix if anyone change the prefix and generate the .pyc and .pyo files
  will be still working.

18:22 mezz 

Second try to fix the pygst.pyc to avoid multimedia/quodlibet pokes on this
file when quodlibet installed. Generate the file in ${PYTHON_SITELIBDIR} rather
than in ${WRKSRC} that seems help. Bump the PORTREVISION.

Reported by:    pointyhat (in quodlibet log)
Approved by:    portmgr (kris)

08:35 marcus 

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,
jylefort and marcus have completed work on a port of HAL to FreeBSD.  This
will allow FreeBSD to take advantage of closer hardware interaction such
as auto-mounting CD-ROMs, USB drives, and music players; auto-playing
audio CDs; and managing laptop power consumption.

But where would this all be without our loyal testers and contributors?
Therefore, the FreeBSD GNOME team would like to thank the following users:

Phillip Neumann <pneumann@gmail.com>
tmclaugh
mux
Yuri Pankov <yuri.pankov@gmail.com>
chinsan
Thomas <freebsdlists@bsdunix.ch>
Brian Gruber <knightbg@yahoo.com>
Franz Klammer <klammer@webonaut.com>
Dominique Goncalves <dominique.goncalves@gmail.com>
Pascal Hofstee <caelian@gmail.com>
Yasuda Keisuke <kysd@po.harenet.ne.jp>
backyard <backyard1454-bsd@yahoo.com>
Andris Raugulis <endrju@null.lv> <endrju@null.lv>
Eric L. Chen <d9364104@mail.nchu.edu.tw>
Pawel Worach <pawel.worach@gmail.com>
QuiRK on #freebsd-gnome
Shane Bell <decept0@gmail.com>
luigi
sajd on #freebsd-gnome
sat
Chris Coleman <chrisc@vmunix.com>
kaeru on #freebsd-gnome
crsd_ via irc.freenode.org/#FreeBSD-GNOME
Joel Diaz <joeldiaz@mac.com>

Enjoy!

Approved by:    portmgr (implicit, kris)

19:29 mezz 

Get this port to generate the .pyc and .pyo files, because other ports will
creating them and causing the plist error. See ee multimedia/quodlibet for
an example. Bump the PORTREVISION.

PR:             ports/103985
Submitted by:   Alexander Botero-Lowry <alexbl@freebsd.org>

16:37 ahze 

- Update to 0.10.5

18:00 ahze 

- Transfer MAINTAINER to multimedia@

Approved by:    dhw (postmaster, for using multimedia@ as maintainer)
                gnome (gstreamer ports)

19:39 ahze 

- Update to 0.10.4

23:03 ahze 

- Update gstreamer to 0.10
- Move all old gstreamer 0.8 ports to gstreamer*80 [1]
- Chase all ports with new gstreamer or gstreaemer moves

Repocopied by:  marcus [1]

07:56 marcus 

Grab maintainership for gnome@.

23:25 linimon 

Reset kwm due to no response about email.

Hat:    portmgr

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

05:22 marcus 

Bump PORTREVISION to chase the glib20 shared library update.

20:02 kwm 

Update to 0.8.2.

Changelog: http://gstreamer.freedesktop.org/releases/gst-python/0.8.2.html

10:54 marcus 

Bump PORTREVISION to chase the glib20 shared lib version change.

22:16 ahze 

- split multimedia/gstreamer-plugins in to individual ports per
  gstreamer plugin (52 new ports).
- Chase changes to ports that used USE_GNOME=gstreamerplugisn
   to use new USE_GSTREAMER= macro, Bump PORTREVISION's

--

Examples of new USE_GSTREAMER macro:

 USE_GSTREAMER=        dvd lame flac
 .include <bsd.port.mk>

 If you want to use USE_GSTREAMER after <bsd.port.pre.mk>
 you must follow one of the examples listed below

       WANT_GSTREAMER= yes
       .include <bsd.port.pre.mk>
       .if defined(WITH_VORBIS)
       USE_GSTREAMER+= vorbis
       .endif

 or
       USE_GSTREAMER=  yes
       .include <bsd.port.pre.mk>
       .if defined(WITH_FAAD)
       USE_GSTREAMER+= faad
       .endif

Note: USE_GSTREAMER=yes will always add a dependency to
               ports/multimedia/gstreamer-plugins

--

Thanks to krion for runing this on pointyhat

Thanks to kwm for helping with this, and many bug fixes , and updates.

20:08 kwm 

Update to version 0.8.1.
Changelog: http://gstreamer.freedesktop.org/releases/gst-python/0.8.1.html

Approved by:    pav (mentor)

18:17 kwm 

Update to version 0.8.0.
Use my FreeBSD address in the maintainer field.

Approved by:    pav (mentor)

22:37 marcus 

Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.

21:28 marcus 

Chase the gstreamer shared lib bump.

00:23 marcus 

Update to 0.7.92.

PR:             68699
Submitted by:   maintainer

18:31 marcus 

Chase the gstreamer shared lib version, and bump PORTREVISION where
appropriate.

17:29 ade 

Sync with new bsd.autotools.mk

20:16 marcus 

Add py-gstreamer, Python bindings around the GStreamer multimedia system.

PR:             65361
Submitted by:   Koop Mast <kwm@rainbow-runner.nl>