notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)

Why was the website so slow for so long?

The cause of the slowdown was a change to the ZFS dataset. In conjunction with the database server, very little caching was being done. This combination resulted in increased disk I/O as the system churned through the database. Details in the blog post which outlines the various things which changed. Many graphs.

non port: multimedia/qt5-multimedia/Makefile
SVNWeb

Number of commits found: 33

Wed, 1 Jan 2020
[ 00:01 adridg ] Original commit   Revision:521666
521666 multimedia/qt5-multimedia/Makefile
521666 multimedia/qt5-multimedia/files/patch-src_multimedia_configure.json
Fix OPENAL knob in multimedia/qt5-multimedia

The knob was already there, but didn't have any machinery attached.

 - Move USES=openal to the knob
 - Introduce a patch to actually make openal configurable
   (instead of only following autodetect, so you can still
   turn the knob off with OpenAL installed)
 - Tidy the port a little
 - Add OPENAL to default options.

Previously, setting or unsetting OPENAL had no effect, and OpenAL
was always a dependency and used. Now, it does have an effect.
I've made it default so that the default options still match
what the port previously did (that is, depend on OpenAL).
Bump PORTREVISION because of that.

(Based very loosely on a patch submitted by Piotr Smyrak)

PR:		242595
Reported by:	Piotr Smyrak
Fri, 8 Nov 2019
[ 16:59 tcberner ] Original commit   Revision:517080
517080 Mk/Uses/qt-dist.mk
517080 Mk/Uses/qt.mk
517080 cad/qcad/Makefile
517080 comms/qt5-connectivity/Makefile
517080 comms/qt5-sensors/Makefile
517080 comms/qt5-serialbus/Makefile
517080 comms/qt5-serialport/Makefile
517080 databases/qt5-sql/Makefile
517080 devel/qt5-assistant/Makefile
517080 devel/qt5-buildtools/Makefile

(Only the first 10 of 88 ports in this commit are shown above. View all ports for this commit)
Update Qt5 to 5.13.2

Announcement:
        https://www.qt.io/blog/qt-5.13.2-released

Thanks to kai@ for updating webengine.

PR:		241649
Exp-run by:	antoine
Wed, 6 Nov 2019
[ 18:07 zeising ] Original commit   Revision:516916
516916 mail/asmail/Makefile
516916 mail/bbmail/Makefile
516916 mail/claws-mail/Makefile
516916 mail/coolmail/Makefile
516916 mail/evolution/Makefile
516916 mail/hbiff/Makefile
516916 mail/wmbiff/Makefile
516916 mail/wmmaiload/Makefile
516916 mail/xbuffy/Makefile
516916 mail/xfaces/Makefile

(Only the first 10 of 117 ports in this commit are shown above. View all ports for this commit)
Add USES=xorg USES=gl, ports categories m

Add USES=xorg and USES=gl to ports in categories starting with 'm'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
Tue, 1 Oct 2019
[ 04:13 tcberner ] Original commit   Revision:513447
513447 Mk/Uses/qt-dist.mk
513447 Mk/Uses/qt.mk
513447 accessibility/qt5-speech/Makefile
513447 comms/qt5-connectivity/pkg-plist
513447 comms/qt5-serialbus/pkg-plist
513447 deskutils/znotes/Makefile
513447 devel/grantlee5/files/patch-git_1b4f22-fix-qt5.13
513447 devel/qt5-assistant/Makefile
513447 devel/qt5-assistant/files/patch-src__src.pro
513447 devel/qt5-core/Makefile

(Only the first 10 of 95 ports in this commit are shown above. View all ports for this commit)
Qt5 update to 5.13.0

For new features, check: https://wiki.qt.io/New_Features_in_Qt_5.13

Thanks to adridg who helped to fix a lot of packages.

Exp-run by:	antoine
PR:		238782
Fri, 26 Jul 2019
[ 20:46 gerald ] Original commit   Revision:507372
507372 Mk/bsd.ruby.mk
507372 accessibility/atkmm/Makefile
507372 accessibility/kmag/Makefile
507372 accessibility/kmousetool/Makefile
507372 accessibility/kmouth/Makefile
507372 accessibility/libqaccessibilityclient/Makefile
507372 accessibility/qt5-speech/Makefile
507372 archivers/R-cran-zip/Makefile
507372 archivers/ark/Makefile
507372 archivers/brotli/Makefile

(Only the first 10 of 3853 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330
Tue, 12 Feb 2019
[ 17:43 tcberner ] Original commit   Revision:492793
492793 Mk/Uses/qt-dist.mk
492793 Mk/Uses/qt.mk
492793 accessibility/qt5-speech/Makefile
492793 comms/qt5-connectivity/Makefile
492793 comms/qt5-sensors/Makefile
492793 comms/qt5-serialbus/Makefile
492793 comms/qt5-serialport/Makefile
492793 databases/qt5-sql/Makefile
492793 databases/qt5-sqldrivers-ibase/Makefile
492793 databases/qt5-sqldrivers-mysql/Makefile

(Only the first 10 of 102 ports in this commit are shown above. View all ports for this commit)
Update Qt5 to 5.12.1

Release announcement:
  https://blog.qt.io/blog/2019/02/01/qt-5-12-1-released/
Changelog:
  https://wiki.qt.io/Qt_5.12.1_Change_Files

- A change was required to qt-dist.mk to always pass LOCALBASE to qmake,
  as Qt5 has been installed to a prefix for some time now, there should
  not be any harm in that, with respect to it picking up installed versions
  of itself during build.

PR:		235622
Exp-run by:	antoine
Wed, 16 Jan 2019
[ 11:13 tijl ] Original commit   Revision:490472
490472 accessibility/kdeaccessibility/Makefile
490472 accessibility/kmag/Makefile
490472 accessibility/kmousetool/Makefile
490472 accessibility/kmouth/Makefile
490472 accessibility/qt5-speech/Makefile
490472 archivers/ark/Makefile
490472 archivers/kf5-karchive/Makefile
490472 archivers/peazip/Makefile
490472 archivers/quazip/Makefile
490472 astro/gpsbabel/Makefile

(Only the first 10 of 1089 ports in this commit are shown above. View all ports for this commit)
Fix Qt5 symbol version scripts to put the catch-all clause first.  When
a symbol matches multiple clauses the last one takes precedence.  If the
catch-all is last it captures everything.  In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API.  This only affects lld because GNU ld always gives the
catch-all lowest priority.

Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium.  Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3]  The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one.  If there's no such non-weak symbol the call
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sun, 16 Dec 2018
[ 14:49 tcberner ] Original commit   Revision:487594
487594 Mk/Uses/qt.mk
487594 astro/merkaartor/files/patch-src_Layers_LicenseDisplayDialog.ui
487594 audio/musescore/files/patch-mscore_editstringdata.cpp
487594 audio/musescore/files/patch-mscore_prefsdialog.ui
487594 audio/sonic-visualiser/Makefile
487594 biology/ugene/files/patch-src_plugins_test__runner_src_Reporter.ui
487594 comms/qt5-connectivity/Makefile
487594 comms/qt5-connectivity/pkg-plist
487594 comms/qt5-sensors/Makefile
487594 comms/qt5-serialbus/Makefile

(Only the first 10 of 116 ports in this commit are shown above. View all ports for this commit)
Update Qt5 to 5.12.0

http://blog.qt.io/blog/2018/12/06/qt-5-12-lts-released/

- This breaks support for libressl again. Patches are welcome.

PR:		233705
Exp-run by:	antoine
Wed, 12 Dec 2018
[ 01:35 gerald ] Original commit   Revision:487272
487272 Mk/bsd.ruby.mk
487272 accessibility/atkmm/Makefile
487272 accessibility/kmag/Makefile
487272 accessibility/kmousetool/Makefile
487272 accessibility/kmouth/Makefile
487272 accessibility/qt5-speech/Makefile
487272 archivers/R-cran-zip/Makefile
487272 archivers/ark/Makefile
487272 archivers/brotli/Makefile
487272 archivers/c-blosc/Makefile

(Only the first 10 of 3168 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590
Sun, 4 Nov 2018
[ 19:00 tcberner ] Original commit   Revision:484140
484140 MOVED
484140 Mk/Uses/qt.mk
484140 astro/kstars/Makefile
484140 astro/marble/Makefile
484140 astro/qmapshack/Makefile
484140 audio/musescore/Makefile
484140 audio/plasma5-plasma-pa/Makefile
484140 audio/supercollider/Makefile
484140 comms/qt5-connectivity/Makefile
484140 comms/qt5-sensors/Makefile

(Only the first 10 of 187 ports in this commit are shown above. View all ports for this commit)
Merge lang/qt5-qml and x11-toolkits/qt5-quick into x11-toolkits/qt5-declarative

- There was no obvious reason to split these ports, and it makes
  porting simpler; the set of ports using either mostly coincided.

Exp-run by:	antoine
PR:		223687
PR:		232751
Sun, 14 Oct 2018
[ 08:01 tcberner ] Original commit   Revision:482034
482034 Mk/Uses/qt-dist.mk
482034 accessibility/qt5-speech/Makefile
482034 comms/qt5-sensors/Makefile
482034 comms/qt5-serialport/Makefile
482034 databases/qt5-sql/Makefile
482034 devel/qt5-assistant/Makefile
482034 devel/qt5-buildtools/Makefile
482034 devel/qt5-concurrent/Makefile
482034 devel/qt5-core/Makefile
482034 devel/qt5-dbus/Makefile

(Only the first 10 of 41 ports in this commit are shown above. View all ports for this commit)
qt5: Fix build on GCC based architectures.

PR:		231584
PR:		231677
PR:		231685
PR:		231830
PR:		231955
PR:		231905
PR:		231892
PR:		231684
PR:		231958
PR:		231960
PR:		231818
PR:		231542
PR:		231860
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sat, 29 Sep 2018
[ 08:04 riggs ] Original commit   Revision:480899
480899 audio/ardour/Makefile
480899 audio/gqradio/Makefile
480899 audio/rhythmbox/Makefile
480899 comms/lirc/Makefile
480899 comms/qsstv/Makefile
480899 devel/efl/Makefile
480899 devel/evemu/Makefile
480899 devel/libevdev/Makefile
480899 devel/libmtdev/Makefile
480899 devel/libudev-devd/Makefile

(Only the first 10 of 75 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION to chase update of multimedia/v4l_compat and libv4l
Thu, 28 Jun 2018
[ 17:39 tcberner ] Original commit   Revision:473503
473503 CHANGES
473503 Mk/Scripts/qa.sh
473503 Mk/Uses/qmake.mk
473503 Mk/Uses/qt-dist.mk
473503 Mk/Uses/qt.mk
473503 Mk/bsd.port.mk
473503 Mk/bsd.qt.mk
473503 Mk/bsd.sanity.mk
473503 accessibility/jovie-kde4/Makefile
473503 accessibility/kaccessible-kde4/Makefile

(Only the first 10 of 1416 ports in this commit are shown above. View all ports for this commit)
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk

From now on, ports that depend on Qt4 will have to set
	USES=		qt:4
	USE_QT=		foo bar
ports depending on Qt5 will use
	USES=		qt:5
	USE_QT=		foo bar

PR:		229225
Exp-run by:	antoine
Reviewed by:	mat
Approved by:	portmgr (antoine)
Differential Revision:	-https://reviews.freebsd.org/D15540
Fri, 18 May 2018
[ 12:27 rakuco ] Original commit   Revision:470288
470288 Mk/bsd.qt.mk
470288 accessibility/qt5-speech/Makefile
470288 accessibility/qt5-speech/pkg-plist
470288 comms/qt5-connectivity/Makefile
470288 comms/qt5-connectivity/pkg-plist
470288 comms/qt5-sensors/Makefile
470288 comms/qt5-serialbus/Makefile
470288 comms/qt5-serialport/Makefile
470288 comms/qt5-serialport/pkg-plist
470288 databases/qt5-sql/Makefile

(Only the first 10 of 103 ports in this commit are shown above. View all ports for this commit)
Update the Qt5 ports to 5.10.1.

The work was done by tcberner and myself, with thanks to antoine for the
exp-run.

Not a lot to report compared to other Qt5 updates:
* net/qt5-network is still broken with LibreSSL. I said this in a commit
  message ages ago but it bears repeating: upstream is open to adding support
  for LibreSSL, but someone needs to step up to maintain it upstream, otherwise
  things will continue to be broken all the time.
* www/qt5-webengine is a huge monster that is terrible to update, just like
  www/chromium itself is. We (kde@) have decided to keep using the 5.9 series
  for the time being, as it should be compatible with the rest of Qt anyway. It
  was updated to 5.9.5, the latest 5.9 release at the time of writing.

PR:		228213
Thu, 29 Mar 2018
[ 19:03 tcberner ] Original commit   Revision:465911
465911 Mk/bsd.qt.mk
465911 accessibility/qt5-speech/Makefile
465911 comms/qt5-connectivity/Makefile
465911 comms/qt5-sensors/Makefile
465911 comms/qt5-serialbus/Makefile
465911 comms/qt5-serialport/Makefile
465911 databases/qt5-sql/Makefile
465911 devel/qt5-assistant/Makefile
465911 devel/qt5-buildtools/Makefile
465911 devel/qt5-concurrent/Makefile

(Only the first 10 of 63 ports in this commit are shown above. View all ports for this commit)
Fix permissions in installed Qt5 header files

For the qt5-* ports bsd.qt.mk sets EXTRACT_AFTER_ARGS, and
thereby does not get the normal default value of
      --no-same-owner --no-same-permissions
passed when extracting. This lead to for example header files
being installed (i.e. copied), with permissions group write
permissions.

Manually append that to the bsd.qt.mk shenanigans (also do the
same in www/qt5-webchannel, which opts out of the bsd.qt.mk value)

PR:		227027
Reported by:	grarpamp@gmail.com
Sat, 20 Jan 2018
[ 12:45 adridg ] Original commit   Revision:459518
459518 multimedia/qt5-multimedia/Makefile
459518 multimedia/qt5-multimedia/files/patch-src_plugins_alsa_qalsaaudiodeviceinfo.cpp
Allow ALSA aliases in the Qt5 sound devices list.

Patch by Stephen Hurd, seems to be ignored upstream. The new patch describes
what it does and why it is needed.

PR:		208570
Submitted by:	Stephen Hurd
Reported by:	Stephen Hurd
Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D13992
Fri, 12 Jan 2018
[ 22:53 rakuco ] Original commit   Revision:458882
458882 multimedia/qt5-multimedia/Makefile
Start setting QT_DEFINES again.

The machinery in bsd.qt.mk's qt-post-install target does not seem to account
for the case of a module no longer defining QT_DEFINES: the lines in
qconfig-modules.h including said module's qconfig-<module>.h will remain.

We did that to qt5-multimedia in r458338, and it results in build errors if
qt5-multimedia had been previously installed. Set QT_DEFINES again to a dummy
value until we figure out a proper solution.

PR:		225100
Sun, 7 Jan 2018
[ 14:34 rakuco ] Original commit   Revision:458338
458338 multimedia/qt5-multimedia/Makefile
458338 multimedia/qt5-multimedia/files/extrapatch-no-gstreamer
458338 multimedia/qt5-multimedia/files/patch-src_multimedia_configure.json
Rework OPTIONs handling in Qt 5.9.3.

qtmultimedia now uses a configure.json file to describe configuration options
and checks that qmake should perform. On the one hand it means
extrapatch-no-gstreamer no longer applies (and neither does the TBR_DEPENDS
hack in the Makefile), on the other the configuration process has been
streamlined: we only need to pass the right options via QMAKE_CONFIGURE_ARGS to
enable and disable options.

While here, stop setting QT_DEFINES altogether in the Makefile, as none of them
are really necessary at all:
- XVIDEO is a Qt4 thing;
- ALSA, OPENAL and PULSEAUDIO are handled by qmake's configure.json
  infrastructure, which sets a QT_NO_<OPTION> macro in qtmultimedia-config.h
  when they are not enabled.
- There is no QT_{NO_}GSTREAMER upstream, so we're basically defining some
  macros that no code is going to use.

Reviewed by:	tcberner (earler version without the QT_DEFINES changes)
Sat, 6 Jan 2018
[ 21:30 rakuco ] Original commit   Revision:458293
458293 CHANGES
458293 MOVED
458293 Mk/Uses/qmake.mk
458293 Mk/bsd.qt.mk
458293 accessibility/Makefile
458293 accessibility/qt5-speech
458293 accessibility/qt5-speech/Makefile
458293 accessibility/qt5-speech/pkg-plist
458293 biology/ugene/files/patch-src_plugins__3rdparty_phylip_src_phylip.h
458293 cad/qelectrotech/Makefile

(Only the first 10 of 558 ports in this commit are shown above. View all ports for this commit)
Update Qt5 ports to 5.9.3.

This took quite a lot of time because Qt's own build system underwent
several changes in 5.8.0 that took a while to adapt to.

And, of course, qt5-webengine is a behemoth that we need to patch like crazy
due to its bundling of Chromium. In fact, most of the Chromium patches in
qt5-webengine have been imported with no changes from www/chromium@433510
("www/chromium: update to 56.0.2924.87").

New port: accessibility/qt5-speech

Bigger changes to Qt5 ports we had to make:
- Qt now allows using a configure.json file to define configuration options
  and specify configuration checks that can be done when qmake is invoked.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 13 Oct 2017
[ 01:12 jrm ] Original commit   Revision:451940
451940 multimedia/qt5-multimedia/Makefile
multimedia/qt5-multimedia: Use OPTIONS_RADIO instead of OPTIONS_MULTI for
audio plugin.
Thu, 12 Oct 2017
[ 22:52 jrm ] Original commit   Revision:451938
451938 multimedia/qt5-multimedia/Makefile
multimedia/qt5-multimedia: Use option helpers and turn on ALSA option by
default.  This is the first update required to fix audio is some
dependencies like comms/wsjtx.  See also PR 208570.

Reported by:	adrian
Approved by:	tcberner, rakuco
Differential Revision:	https://reviews.freebsd.org/D12480
Tue, 23 May 2017
[ 05:03 rezny ] Original commit   Revision:441503
441503 accessibility/redshift/Makefile
441503 astro/boinc-astropulse/Makefile
441503 astro/boinc-setiathome-v7/Makefile
441503 astro/celestia/Makefile
441503 astro/nightfall/Makefile
441503 astro/opencpn/Makefile
441503 astro/openuniverse/Makefile
441503 astro/qlandkartegt/Makefile
441503 audio/amarok-kde4/Makefile
441503 audio/aylet/Makefile

(Only the first 10 of 711 ports in this commit are shown above. View all ports for this commit)
Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845
Sun, 22 Jan 2017
[ 15:08 rakuco ] Original commit   Revision:432151
432151 multimedia/qt5-multimedia/Makefile
Remove sed call that is no longer necessary.

The sys/types.h include was added upstream and is present in Qt since 5.6.1.
Sat, 17 Sep 2016
[ 09:46 rakuco ] Original commit   Revision:422306
422306 Mk/bsd.qt.mk
422306 comms/Makefile
422306 comms/qt5-connectivity/pkg-plist
422306 comms/qt5-serialbus
422306 comms/qt5-serialbus/Makefile
422306 comms/qt5-serialbus/pkg-plist
422306 devel/Makefile
422306 devel/qbs/Makefile
422306 devel/qbs/pkg-plist
422306 devel/qmake5/Makefile

(Only the first 10 of 105 ports in this commit are shown above. View all ports for this commit)
Update the Qt5 ports to 5.6.1.

This took longer than expected, but there are quite a few changes to the
existing ports and a few new ones.

General upstream changes:
- Starting with Qt 5.6.2, Qt will fail at configuration time if LibreSSL is
  being used. According to the discussion here:
  https://codereview.qt-project.org/#/c/154800/
  The Qt project is not opposed to LibreSSL, but does not want to mix
  support for it into the OpenSSL backend code, especially as they move
  towards supporting OpenSSL 1.1.
  People interested in LibreSSL support are welcome to submit a separate
  backend upstream, but are expected to maintain it. We (kde@) are not
  opposed to carrying some patches authored by others in the future, as long
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sat, 16 Apr 2016
[ 17:17 rakuco ] Original commit   Revision:413463
413463 multimedia/qt5-multimedia/Makefile
413463 multimedia/qt5-multimedia/files/patch-git_9047d9b
Add patch to fix underrun errors in the ALSA plugin.

The ALSA plugin doesn't suspend the ALSA device when the ::suspend() method is
called. This results in underrun errors when it's resumed.

In ALSA, stopping a pcm doesn't close it, so the ALSA stop/start functions map
to the QAudioInput suspend/resume functions.

PR:		208598
Submitted by:	shurd
MFH:		2016Q2
Fri, 1 Apr 2016
[ 14:16 mat ] Original commit   Revision:412348
412348 mail/addresses-goodies/Makefile
412348 mail/alpine/Makefile
412348 mail/anubis/Makefile
412348 mail/archiveopteryx-devel/Makefile
412348 mail/archiveopteryx/Makefile
412348 mail/assp/Makefile
412348 mail/automx/Makefile
412348 mail/avenger/Makefile
412348 mail/balsa/Makefile
412348 mail/batv-milter/Makefile

(Only the first 10 of 2612 ports in this commit are shown above. View all ports for this commit)
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight
Sun, 24 Jan 2016
[ 18:10 rakuco ] Original commit   Revision:407169
407169 Mk/bsd.qt.mk
407169 comms/Makefile
407169 comms/qt5-connectivity
407169 comms/qt5-connectivity/Makefile
407169 comms/qt5-connectivity/pkg-plist
407169 comms/qt5-sensors
407169 comms/qt5-sensors/Makefile
407169 comms/qt5-sensors/pkg-plist
407169 comms/qt5-serialport/pkg-plist
407169 devel/Makefile

(Only the first 10 of 99 ports in this commit are shown above. View all ports for this commit)
Update Qt5 to 5.5.1.

This is the latest stable release at time of writing.

Release announcement: http://blog.qt.io/blog/2015/07/01/qt-5-5-released/
New features in Qt 5.5: https://wiki.qt.io/New_Features_in_Qt_5.5

As usual, huge thanks to Tobias Berner (tcberner@gmail.com) for all his work
on these ports in kde@'s experimental area51 repository. He's the one who
started the update and did a lot of the initial work on Qt 5.5. Ralf Nolden
(nolden@kde.org) has contributed the initial version of most of our new Qt5
ports.

Also thanks to Yuri Victorovich (yuri@rawbw.com) for contributing PR 205805
with his own patch for the 5.5.1 update. Some of his changes there prompted
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Mon, 28 Sep 2015
[ 20:20 kwm ] Original commit   Revision:398140
398140 Mk/bsd.qt.mk
398140 multimedia/qt5-multimedia/Makefile
Fix qt5-multimedia with GStreamer 1.6.0.

Qt 5 does the following during the build of qt5-multimedia:

--- qt-post-install ---
echo "# define QT_GSTREAMER"  >> /wrkdirs/usr/ports/multimedia/qt5-multimedia/
  work/stage/usr/local/include/qt5/QtCore/modules/qconfig-multimedia.h
echo "# define QT_GST_VERSION=1.0"  >> /wrkdirs/usr/ports/multimedia/
 
qt5-multimedia/work/stage/usr/local/include/qt5/QtCore/modules/qconfig-multimedia.h
echo "# define QT_XVIDEO"  >> /wrkdirs/usr/ports/multimedia/qt5-multimedia/
  work/stage/usr/local/include/qt5/QtCore/modules/qconfig-multimedia.h

That's (second line) not how #define works in C of C++

The resulting qconfig-multimedia.h file contains this:

#if !defined(QT_GST_VERSION=1.0) && !defined(QT_NO_GST_VERSION=1.0)
# define QT_GST_VERSION=1.0
#endif

This patch filters out the "=1.0" from the define. Bump qt5-multimedia
since the installed header needs to be corrected.

Reported by:	antoine@
Patch submitted by:	Adriaan de Groot <groot@kde.org>
Wed, 5 Nov 2014
[ 09:39 rakuco ] Original commit   Revision:372179
372179 MOVED
372179 Mk/Uses/qmake.mk
372179 Mk/bsd.qt.mk
372179 comms/qt5-serialport
372179 comms/qt5-serialport/Makefile
372179 comms/qt5-serialport/pkg-plist
372179 databases/qt5-sql/Makefile
372179 databases/qt5-sqldrivers-odbc/Makefile
372179 databases/qt5-sqldrivers-sqlite2/Makefile
372179 databases/qt5-sqldrivers-sqlite3/Makefile

(Only the first 10 of 106 ports in this commit are shown above. View all ports for this commit)
Update Qt5 ports to 5.3.2.

Proudly presented by the KDE on FreeBSD team, with several guest stars.

This update took way longer than initially expected due to us previously
accumulating assumptions and changes to Qt's build system that finally bit
us back with the 5.3 release series, so we had to do a fair amount of
cleanup.

New ports:
- comms/qt5-serialport: Qt functions to access serial ports, originally
                        based on work by Fernando Apesteguia. [1]
- devel/qt5-qdoc: Qt documentation generator, the Qt5 equivalent of
                  devel/qt4-qdoc3. Originally worked on by Tobias Berner.
                  It had already been half-split from devel/qt5-buildtools,
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sat, 11 Oct 2014
[ 18:30 rakuco ] Original commit   Revision:370658
370658 multimedia/qt5-multimedia/Makefile
Properly use USES=openal instead of OPENAL_USE.

The latter was removed from the tree in r337472, before we even added
qt5-multimedia to it.
Wed, 10 Sep 2014
[ 20:50 gerald ] Original commit   Revision:367888
367888 accessibility/accerciser/Makefile
367888 accessibility/jovie/Makefile
367888 accessibility/kaccessible/Makefile
367888 accessibility/kdeaccessibility4/Makefile
367888 accessibility/kmag/Makefile
367888 accessibility/kmousetool/Makefile
367888 accessibility/kmouth/Makefile
367888 accessibility/orca/Makefile
367888 arabic/kde4-l10n/Makefile
367888 arabic/libreoffice/Makefile

(Only the first 10 of 3171 ports in this commit are shown above. View all ports for this commit)
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)
Sat, 19 Jul 2014
[ 11:09 tijl ] Original commit   Revision:362251
362251 Mk/bsd.qt.mk
362251 databases/qt4-sql/Makefile
362251 databases/qt4-sql/pkg-plist
362251 databases/qt5-sql/Makefile
362251 databases/qt5-sql/pkg-plist
362251 devel/dbus-qt4/Makefile
362251 devel/dbus-qt4/pkg-plist
362251 devel/dbus-qt5/Makefile
362251 devel/dbus-qt5/pkg-plist
362251 devel/gnome-vfs/files/patch-ac

(Only the first 10 of 93 ports in this commit are shown above. View all ports for this commit)
Remove libtool .la files from all Qt ports

Approvedy by:	kde (makc)
Mon, 3 Mar 2014
[ 16:50 makc ] Original commit   Revision:346930
346930 CHANGES
346930 Mk/bsd.port.mk
346930 Mk/bsd.qt.mk
346930 databases/Makefile
346930 databases/qt5-sql
346930 databases/qt5-sql/Makefile
346930 databases/qt5-sql/pkg-message
346930 databases/qt5-sql/pkg-plist
346930 databases/qt5-sqldrivers-ibase
346930 databases/qt5-sqldrivers-ibase/Makefile

(Only the first 10 of 167 ports in this commit are shown above. View all ports for this commit)
KDE/FreeBSD team is happy to present Qt 5 in ports!

Alberto Villa (avilla@) has done all the hard work to create Qt 5 ports.
Trivial update from 5.2.0-beta1 to 5.2.1 by me.

Special thanks for Adriaan de Groot <groot@kde.org> for his assistance for
Qt-5.2.0 update.

Approved by:	portmgr (bapt) (for Mk/bsd.port.mk)

Number of commits found: 33

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, iXsystems, and RootBSD

This site
What is FreshPorts?
About the authors
Issues
FAQ
How big is it?
The latest upgrade!
Privacy
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
mbedtlsFeb 24
mbedtlsFeb 24
opensmtpdFeb 24
opensmtpdFeb 24
weechatFeb 21
webkit2-gtk3Feb 19
dovecotFeb 13
gitlab-ceFeb 13
grub2-bhyveFeb 12
libexifFeb 11
linux-flashplayerFeb 11
nginxFeb 09
nginx-develFeb 09
ksh93Feb 07
ksh93-develFeb 07

11 vulnerabilities affecting 52 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities

Last updated:
2020-02-24 21:18:14


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 38440
Broken 646
Deprecated 418
Ignore 917
Forbidden 3
Restricted 150
No CDROM 72
Vulnerable 24
Expired 4
Set to expire 390
Interactive 0
new 24 hours 4
new 48 hours10
new 7 days26
new fortnight51
new month311

Servers and bandwidth provided by
New York Internet, iXsystems, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2020 Dan Langille. All rights reserved.