| non port: multimedia/totem/Makefile |
|
SVNWeb
|
Number of commits found: 172 (showing only 100 on this page) |
|
Thu, 2 Mar 2023
|
[ 05:23 Tobias C. Berner (tcberner)  ]    fa81a4f (Only the first 10 of 1168 ports in this commit are shown above.  )
accessibility/at-spi2-core: update to 2.46.0
What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
interface.
What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).
What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments. (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 5 Feb 2023
|
[ 15:50 Po-Chuan Hsieh (sunpoet) ] 8ad6509
multimedia/totem: Add missing @${PY_FLAVOR}
Approved by: portmgr (blanket)
With hat: python
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 63f36d3 (Only the first 10 of 224 ports in this commit are shown above. )
multimedia: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron LI <aly@aaronly.me>
* Alexander Botero-Lowry <alexbl@FreeBSD.org>
* Alexander Logvinov <ports@logvinov.com>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Anders Nordby <anders@FreeBSD.org>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Andrew Thompson <andy@fud.org.nz>
* Andrew Thompson <thompsa@FreeBSD.org>
* Angel Carpintero <ack@telefonica.net>
* Anish Mistry (with help from mean)
* Anonymous <swell.k@gmail.com> (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 30 Apr 2022
|
[ 08:03 Tobias C. Berner (tcberner) ] ca3f925 (Only the first 10 of 133 ports in this commit are shown above. )
framework: convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert ports tree to make use of USES=gstreamer
- remove duplicate dependency lines from the tree
Differential Revision: https://reviews.freebsd.org/D35097
|
|
Sun, 10 Apr 2022
|
[ 19:11 Charlie Li (vishwin) ] d63665f (Only the first 10 of 892 ports in this commit are shown above. )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
|
|
Sat, 26 Mar 2022
|
[ 08:27 Matthias Fechner (mfechner) ] 247c7db (Only the first 10 of 867 ports in this commit are shown above. )
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
|
|
Sun, 23 Jan 2022
|
[ 10:24 Jan Beich (jbeich) ] 6c272e7
multimedia/totem: unbreak build with Meson 0.61.0
data/appdata/meson.build:3:0: ERROR: Function does not take positional
arguments.
PR: 260943
Regressed by: https://github.com/mesonbuild/meson/commit/61f2866a9fa1
|
|
Sun, 7 Nov 2021
|
[ 20:34 Jan Beich (jbeich) ] 0c9b91e
multimedia/totem: drop unused Meson options after 38ae40f5daf7
meson.build:1:0: ERROR: Unknown options: "enable-vala"
https://gitlab.gnome.org/GNOME/totem/-/commit/627c1ee182ea
PR: 259080
Reported by: antoine (via exp-run)
Regressed by: https://github.com/mesonbuild/meson/commit/dbf2ace6ca1c
|
|
Sat, 23 Oct 2021
|
[ 17:42 Neel Chauhan (nc) ] 9a2745d
multimedia/totem: Update to 3.38.2
|
|
Sun, 10 Oct 2021
|
[ 19:44 Baptiste Daroussin (bapt) ] 2c672a4 (Only the first 10 of 586 ports in this commit are shown above. )
INSTALLS_ICONS: retire the macro and rework the related dependencies
While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)
|
|
Sun, 20 Jun 2021
|
[ 01:42 Neel Chauhan (nc) ] c8eb596
multimedia/totem: Update to 3.38.1
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Thu, 10 Dec 2020
|
[ 22:00 sunpoet ]  
Update USES=python for py-isort 5.6.4 update
|
|
Mon, 7 Dec 2020
|
[ 09:17 tcberner ]
multimedia/totem: remove no longer used zeitgeist dependency
No longer used since 3.32.0:
https://gitlab.gnome.org/GNOME/totem/-/commit/51d6e05a2335eb03178576381e183e50a88ca521
PR: 251638
Reported by: Greg V <greg@unrelenting.technology>
|
|
Tue, 29 Sep 2020
|
[ 15:37 bapt ]
Remove dependency on nautilus not needed since 3.31*
Add dependency on gnomedesktop forgotten previously
|
[ 15:07 bapt ]
update totem to 3.38
and totem-pl-parser to 3.26.5
|
[ 12:07 bapt ] (Only the first 10 of 108 ports in this commit are shown above. )
First batch at upgrading gnome to 3.36/3.38
Update evolution-dataserver to 3.38.0 and because of ABI breakage update ports
depending on it
Update bijiben to 3.38.0
Update gnome-calendar to 3.38.0
Update gnome-contacts to 3.38
Update gnome-maps to 3.38.0
Patch gnome-todo to work with newer evolution-dataserver (patched obtained from
OpenBSD/Archlinux)
Update evolution to 3.38.0
Update evolution-ews to 3.38.0 (among changes it brings support for office365)
Update folks to 0.14.0
Update cheese to 3.38.0(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 6 Nov 2019
|
[ 18:07 zeising ] (Only the first 10 of 117 ports in this commit are shown above. )
Add USES=xorg USES=gl, ports categories m
Add USES=xorg and USES=gl to ports in categories starting with 'm'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
|
|
Fri, 4 Oct 2019
|
[ 22:20 linimon ]
Prepare for powerpc-on-clang by deleting hard-coded tests for libstdc++.so
as a stand-in for "are we running on gcc".
For people already testing powerpc on clang, it is possible that they
already have both compilers in base. Thus, the assumption that "gcc is
in base" (e.g. libstdc++.so exists) always means "force use of GCC" is
already broken. It will be for everyone on -CURRENT once the switch is
made.
Tested on both amd64 and powerpc64.
PR: 239152
Approved by: gnome (maintainer-timeout > 1 month)
|
|
Wed, 1 May 2019
|
[ 19:35 rene ] (Only the first 10 of 128 ports in this commit are shown above. )
Remove esound support from pulseaudio as audio/esound expired.
Bump PORTREVISIONs of dependent ports.
Build-tested in poudriere on a head-amd64 jail for audio/pulseaudio*
|
|
Tue, 16 Apr 2019
|
[ 18:39 tcberner ]
devel/ninja: update to 1.9.0
- multimedia/totem: disable vala bindings, until upstream
fixes the target creation.
PR: 235507
Exp-run by: antoine
Submitted by: gblach
Approved by: gnome (kwm)
|
|
Tue, 25 Dec 2018
|
[ 23:21 linimon ]
Do not create an empty target if it is not required.
Reported by: mat
Approved by: portmgr (tier-2 blanket)
|
[ 13:09 linimon ]
Base GCC can't use -Wno-unused-but-set-variable option. Remove it when
base GCC is used.
While here, add USES=gl.
PR: 233910
Submitted by: Piotr Kubaj
Approved by: portmgr (tier-2 blanket)
|
|
Sun, 9 Dec 2018
|
[ 15:00 kwm ]
Update totem to 3.26.2.
|
|
Fri, 2 Nov 2018
|
[ 13:32 rene ] (Only the first 10 of 243 ports in this commit are shown above. )
Remove compatibility code for FreeBSD < 11.2 from all ports.
Simplify some ports where DragonFlyBSD no longer needs to be special-cased.
Submitted by: rene
Reviewed by: bapt, jbeich
Differential Revision: https://reviews.freebsd.org/D17724
|
|
Sun, 30 Sep 2018
|
[ 11:58 kwm ] (Only the first 10 of 732 ports in this commit are shown above. )
The FreeBSD GNOME team proudly presents GNOME 3.28 for FreeBSD.
The offical GNOME 3.28 release notes can be found at
https://help.gnome.org/misc/release-notes/3.28/
Thanks to Antoine Brodin for running the exp-runs.
PR: 229761
|
|
Tue, 11 Sep 2018
|
[ 18:34 zeising ] (Only the first 10 of 331 ports in this commit are shown above. )
Change x11/xorgproto to become a build dep
Change x11/xorgproto to become a build time dependency when added to
USE_XORG. Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.
PR: 230909
Reviewed by: eadler
Approved by: portmgr (antoine)
Obtained
from: https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run: antoine
Differential Revision: https://reviews.freebsd.org/D16906
|
|
Sun, 2 Sep 2018
|
[ 23:57 sunpoet ]
Change RUN_DEPENDS from pylint to pylint1
- Bump PORTREVISION for dependency change
|
|
Tue, 31 Jul 2018
|
[ 18:41 zeising ] (Only the first 10 of 254 ports in this commit are shown above. )
Switch to xorgproto instead of individual packages
Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto. This update
tracks that change.
* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
instead depend on xorgproto. Bump portrevision.
* Delete the old *proto packages, update MOVED.
PR: 230023
Submitted by: zeising
Approved by: portmgr (antoine)
exp-run by: antoine
|
|
Mon, 19 Feb 2018
|
[ 11:10 antoine ] (Only the first 10 of 442 ports in this commit are shown above. )
Reduce dependency on the python2 metaport
PR: 225752
Submitted by: Yasuhiro KIMURA
|
|
Wed, 13 Dec 2017
|
[ 16:05 antoine ]
- Those ports fail to build with python3
- Add some explicit FLAVOR to dependencies where needed
- For totem, the pylint command is needed, not the pylint module
|
|
Thu, 30 Nov 2017
|
[ 15:50 mat ] (Only the first 10 of 2423 ports in this commit are shown above. )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 20 May 2017
|
[ 09:29 kwm ] (Only the first 10 of 11 ports in this commit are shown above. )
svn copy grilo -> grilo2 and grilo-plugins -> grilo-plugins2
* These is done so grilo and grilo-plugins can be updated to 0.3.x and
the users of grilo can switch when they are ready.
* Chase grilo users to the new locations.
|
|
Tue, 25 Apr 2017
|
[ 08:20 riggs ] (Only the first 10 of 701 ports in this commit are shown above. )
Chase ffmpeg 3.3 update (ABI changes)
PR: 218658
Submitted by: riggs
|
|
Fri, 1 Apr 2016
|
[ 14:16 mat ] (Only the first 10 of 2612 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
|
Sun, 14 Feb 2016
|
[ 18:57 kwm ] (Only the first 10 of 460 ports in this commit are shown above. )
The FreeBSD GNOME team proudly presents GNOME 3.18 for FreeBSD.
The offical GNOME 3.18 release notes can be found at
https://help.gnome.org/misc/release-notes/3.18/
This update doesn't contain the glib/gtk c++ bindings which will
be done in a another update due to the requirement on c++11 and the
amount of fallout this probably will give.
GDM is still at version 3.16 due to some issues.
Bump mate-themes to use the gtk 3.18 version of the themes.
Thanks to Antoine Brodin for running the exp-runs.
This release was made possible by the following people:
Gustau Perez
Ting-Wei_Lan
PR: 207006
|
|
Sat, 12 Dec 2015
|
[ 11:01 kwm ] (Only the first 10 of 52 ports in this commit are shown above. )
Update to the lastest GNOME 3.16 releases.
|
|
Fri, 4 Sep 2015
|
[ 10:41 kwm ]
Update totem to 3.16.3.
Obtained from: gome devel repo
|
|
Sat, 8 Aug 2015
|
[ 09:40 kwm ]
Totem uses python2. No need to attempt to also include the python3 version of
libpeas python bindings in.
Submitted by: antoine@
|
|
Wed, 5 Aug 2015
|
[ 19:13 kwm ] (Only the first 10 of 601 ports in this commit are shown above. )
The FreeBSD GNOME team proudly presents GNOME 3.16 for FreeBSD.
The offical GNOME 3.16 release notes can be found at
https://help.gnome.org/misc/release-notes/3.16/
Upgrade instructions for port users:
Delete the old tracker package with:
# pkg delete -f tracker
And user port upgrade tool of choice to upgrade.
Thanks to Antoine Brodin for running the exp-runs.
This release was made possible by the following people:
Gustau Perez
Ting-Wei_Lan
PR: 201980
|
|
Fri, 12 Jun 2015
|
[ 15:14 kwm ] (Only the first 10 of 17 ports in this commit are shown above. )
* Split off the python bindings from the main libpeas port.
* This allows use to supply both python bindings. Update libpeas using
ports for this change.
* Assign maintainership to gnome@
Obtained from: GNOME devel repo
|
|
Sat, 10 Jan 2015
|
[ 23:15 demon ] (Only the first 10 of 39 ports in this commit are shown above. )
Switch default python3 version from 3.3 to 3.4.
Bump PORTREVISIONs for the affected ports.
Exp-run by: antoine
|
|
Tue, 30 Dec 2014
|
[ 20:13 kwm ] (Only the first 10 of 117 ports in this commit are shown above. )
Update cinnamon to 2.4, this should fix [1] and [2].
Update totem to 3.14 now that we have gstreamer 1.4 and minor gnome updates.
Update evolution suite to 3.12.9.
Make sure gtk30 pulls in adwait-icon-theme, since it now the default theme [3].
PR: 195290 [1], 195289 [2], 195455 [3]
Obtained from: gnome devel repo
|
|
Wed, 19 Nov 2014
|
[ 11:49 kwm ] (Only the first 10 of 1460 ports in this commit are shown above. )
The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.
This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.
Apart from updating ports to newer versions
GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.
Shell Extensions can be installed via https://extensions.gnome.org/ , we have (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 21 Oct 2014
|
[ 17:22 mva ] (Only the first 10 of 30 ports in this commit are shown above. )
- Convert ports of multimedia/ to new USES=python
Approved by: portmgr (implicit)
|
|
Mon, 11 Aug 2014
|
[ 13:59 tijl ] (Only the first 10 of 17 ports in this commit are shown above. )
comms/lirc:
- Fix missing -lusb [1]
- Convert to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Use @sample
Reported by: sbruno [1]
|
|
Wed, 11 Jun 2014
|
[ 14:50 tijl ] (Only the first 10 of 297 ports in this commit are shown above. )
Support LIBS like LDFLAGS.
- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS. Also remove references to
PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
required additional patches.
Somewhat simplified a linker command line looks like:
${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}
where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us. If possible -L and -l flags need to be(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 13 May 2014
|
[ 11:54 tijl ] (Only the first 10 of 37 ports in this commit are shown above. )
Convert x11-toolkits/unique to "USES=libtool pathfix tar:bzip2".
Bump PORTREVISION on all dependent ports. [1]
audio/ario: USES=libtool.
audio/gmpc: USES=libtool.
audio/gnome-media: USES=libtool:keepla tar:bzip2.
audio/xfce4-mixer: USES=libtool tar:bzip2.
graphics/shotwell: Unbreak and USES=tar:xz.
science/gwyddion: USES=libtool tar:bzip2.
sysutils/mate-control-center: USES=libtool.
x11/xfce4-clipman-plugin: USES=libtool tar:bzip2.
Approved by: portmgr (implicit) [1]
|
|
Wed, 23 Apr 2014
|
[ 13:25 tijl ] (Only the first 10 of 462 ports in this commit are shown above. )
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 9 Apr 2014
|
[ 13:58 bapt ]
Support stage
strip binaries
USES=webplugin
USES=libtool instead of ltverhack
|
|
Fri, 20 Sep 2013
|
[ 20:57 bapt ] (Only the first 10 of 404 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
multimedia)
|
|
Tue, 3 Sep 2013
|
[ 14:08 bapt ] (Only the first 10 of 23 ports in this commit are shown above. )
Add an explicit dependency on pkgconf
|
|
Wed, 5 Jun 2013
|
[ 06:53 jgh ]
- adoption of optionsNG
Approved by: portmgr (bapt)
|
|
Fri, 26 Apr 2013
|
[ 10:44 ak ] (Only the first 10 of 277 ports in this commit are shown above. )
- Convert USE_GETTEXT to USES (part 4)
Approved by: portmgr (bapt)
|
|
Tue, 19 Mar 2013
|
[ 10:40 kwm ] (Only the first 10 of 47 ports in this commit are shown above. )
Convert almost all gnome@ ports to OptionsNG, trim header, use USES=pathfix
instead of gnomehack and pet portlint.
Add conflicts with future gnome3 versions.
Reviewed by: miwi, bapt
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Wed, 14 Mar 2012
|
[ 15:29 mezz ]
Remove the dependency of audio/libmusicbrainz.
PR: ports/165753
Submitted by: Jason E. Hale <bsdkaffee@gmail.com>
Feature safe: yes
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Sat, 5 Mar 2011
|
[ 12:05 miwi ]
- Bump PORTREVISION to force rebuild after python update.
|
|
Sat, 26 Feb 2011
|
[ 22:11 nox ] (Only the first 10 of 31 ports in this commit are shown above. )
- Update comms/lirc to 0.9.0p1_4 in order to be able to use the lirc
support in webcamd svn (for mceusb-based receivers/transmitters and
USB DVB tuner remotes supported by the Linux code), and enable
support for a few more USB devices while we're at it tho of those
only an FTDI-based one was tested:
http://www.huitsing.nl/irftdi/ [1]
- Fix plist for audio/rhythmbox and multimedia/totem and
add missing LIRC_{CFLAGS,LIBS} variables to CONFIGURE_ENV for
multimedia/xine when building them with (optional) lirc support. [2]
- Chase liblirc_client shlib version bump for ports depdending on it
and bump PORTREVISIONs for ports depending on it by default.
Approved by: portmgr (miwi) [2]
Thanks to: Warren Block <wblock@wonkity.com> for testing [1]
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sat, 20 Nov 2010
|
[ 15:37 kwm ] (Only the first 10 of 609 ports in this commit are shown above. )
Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/
This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.
This release features commits by avl, marcus, mezz and myself.
The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:
Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX (Only the first 15 lines of the commit message are shown above )
|
|
Thu, 2 Sep 2010
|
[ 21:36 makc ]
Chase multimedia/libdvdnav update
PR: ports/131969
Submitted by: Ganael LAPLANCHE <ganael.laplanche at martymac.com>
|
|
Fri, 21 May 2010
|
[ 23:10 kwm ]
Update to 2.30.2
|
|
Mon, 10 May 2010
|
[ 21:19 kwm ] (Only the first 10 of 772 ports in this commit are shown above. )
Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .
This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.
Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.
Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues. (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Tue, 22 Dec 2009
|
[ 16:01 ahze ]
Update to 2.28.5
|
|
Sat, 28 Nov 2009
|
[ 20:06 marcus ] (Only the first 10 of 823 ports in this commit are shown above. )
Presenting GNOME 2.28.1 for FreeBSD. The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.
On the FreeBSD front, though, a lot went into this release. Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration. Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.
But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.
(Only the first 15 lines of the commit message are shown above )
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
|
Fri, 3 Jul 2009
|
[ 12:11 avl ]
Update to 2.26.3.
Reviewed by: kwm (GNOME team)
Approved by: tabthorpe (mentor)
|
|
Mon, 4 May 2009
|
[ 04:29 marcus ]
Update to 2.26.2.
|
|
Fri, 10 Apr 2009
|
[ 05:56 marcus ] (Only the first 10 of 480 ports in this commit are shown above. )
Presenting GNOME 2.26 for FreeBSD. See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider. Almost all of the Gecko consumers
can make use of this provider by setting:
WITH_GECKO=libxul
The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.
|
|
Fri, 20 Feb 2009
|
[ 22:50 kwm ]
Update to 2.24.4.
|
|
Wed, 28 Jan 2009
|
[ 09:05 kwm ]
Chase libepc lib bump.
|
|
Sat, 10 Jan 2009
|
[ 05:22 marcus ] (Only the first 10 of 718 ports in this commit are shown above. )
Presenting GNOME 2.24 for FreeBSD.
See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes. On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs. The documentation updates
to the website are forthcoming.
This release features commits by adamw, ahze, kwm, mezz, and myself. It would
not have been possible without are contributors and testers:
Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen (Only the first 15 lines of the commit message are shown above )
|
[ 02:45 mezz ] (Only the first 10 of 76 ports in this commit are shown above. )
Add a new framework for browser plugins, USE_WEBPLUGINS. It is for which foo
plugins support one of web browsers and can take care of plist (depend on how
you use it) at the same time. I have written a complete document and even show
how it works in the www/firefox/Makefile.webplugins so be sure to read in
there. If there is anything that isn't clear in the document, please feel free
to ask and I will try my best to improvement it.
FYI: GNOME 2.24 depends on this, so it's coming.
BTW: It's based on www/linux-mplayer-plugin/Makefile.npapi with heavy modified.
Approved by: portmgr
|
|
Wed, 7 Jan 2009
|
[ 04:52 marcus ]
Fix PORTREVISION after OpenLDAP bump.
PR: 130253
|
|
Mon, 5 Jan 2009
|
[ 19:04 delphij ] (Only the first 10 of 249 ports in this commit are shown above. )
Bump PORTREVISION's after OpenLDAP update.
Suggested by: rafan
|
|
Mon, 4 Aug 2008
|
[ 16:12 mezz ]
Add patches from Ubuntu's launchpad to fix the plugins stability problem with
Firefox 3, bump the PORTREVISION.
Obtained from: https://bugs.launchpad.net/ubuntu/+source/totem/+bug/131658
Reported by: a few
Tested by: Joe Kelsey <joe@zircon.seattle.wa.us>
|
|
Fri, 6 Jun 2008
|
[ 13:48 edwin ] (Only the first 10 of 149 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Thu, 24 Apr 2008
|
[ 20:15 mezz ]
Update to 2.22.2
|
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
|
Tue, 8 Apr 2008
|
[ 19:50 ahze ]
- Update to 2.22.1
- Add support for the following plugins: tracker, youtube, publish
|
|
Mon, 24 Mar 2008
|
[ 03:50 marcus ] (Only the first 10 of 712 ports in this commit are shown above. )
The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD. The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ . On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media. Work
is also underway to tie webkit more closely into GNOME. As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.
This release would not have been possible without the contributions and
testing efforts of the following people:
Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon
|
|
Mon, 7 Jan 2008
|
[ 22:03 mezz ]
Update to 2.20.3.
|
|
Wed, 24 Oct 2007
|
[ 23:37 marcus ] (Only the first 10 of 1479 ports in this commit are shown above. )
Presenting GNOME 2.20.1 and all related works for FreeBSD. The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ . Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).
The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy. We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD. This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.
This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully. Ahze and pav also deserve thanks for(Only the first 15 lines of the commit message are shown above )
|
|
Sun, 15 Jul 2007
|
[ 17:21 mezz ]
Remove 'BROKEN=needs libxine-1.1.7' as libxine port has been updated to 1.1.7
recently.
|
|
Thu, 28 Jun 2007
|
[ 12:10 pav ]
- Mark totem-xine broken, it needs libxine-1.1.7, we have 1.1.4 in ports
|
|
Mon, 28 May 2007
|
[ 23:19 mezz ]
Update to 2.18.2.
|
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
|
Mon, 23 Apr 2007
|
[ 04:13 mezz ]
Make DVD works correct by default for s|/dev/dvd|${DEFAULT_DVD_DEVICE}/g. Bump
the PORTREVISION. While I am here, remove FreeBSD 4.x stuff.
Reported by: tmclaugh
|
|
Thu, 5 Apr 2007
|
[ 03:49 marcus ]
Update to 2.18.1.
|
|
Sat, 24 Mar 2007
|
[ 16:28 mezz ]
Make sure totem-xine to actually have xine enable by add --enable-xine=yes,
without it will enable gstreamer by default. Bump the PORTREVISION to have our
users' totem-xine correct.
PR: ports/110749
Submitted by: Sergio Lenzi <lenzi@k1.com.br>
|
|
Thu, 22 Mar 2007
|
[ 05:27 marcus ]
Chase the libxine shared lib version.
|
|
Mon, 19 Mar 2007
|
[ 05:14 marcus ] (Only the first 10 of 461 ports in this commit are shown above. )
Presenting GNOME 2.18 for FreeBSD. GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features. Not that it doesn't have its share of new and exciting
items. See http://www.gnome.org/start/2.18/ for all the goodies in
this release.
GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.
|
|
Thu, 15 Feb 2007
|
[ 08:35 jylefort ] (Only the first 10 of 20 ports in this commit are shown above. )
Track libxine update.
|
|
Mon, 29 Jan 2007
|
[ 17:51 mezz ]
Update to 2.16.5.
|
Number of commits found: 172 (showing only 100 on this page) |
As an Amazon Associate I earn from qualifying purchases.