non port: multimedia/xtheater/Makefile |
SVNWeb
|
Number of commits found: 35 |
Fri, 12 Oct 2018
|
[ 09:19 antoine ] (Only the first 10 of 92 ports in this commit are shown above. )
Deprecate most glib12 consumers
With hat: portmgr
|
Tue, 23 May 2017
|
[ 05:03 rezny ] (Only the first 10 of 711 ports in this commit are shown above. )
Revision bump of all ports with USE_GL after consolidation of mesa-libs
Approved by: swills (mentor)
Differential Revision: https://reviews.freebsd.org/D10845
|
Fri, 1 Apr 2016
|
[ 14:16 mat ] (Only the first 10 of 2612 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
Sat, 18 Apr 2015
|
[ 09:47 tijl ] (Only the first 10 of 41 ports in this commit are shown above. )
- Remove libtool hacks and patches that are now handled by USES=libtool
- Remove CONFIG_SHELL from CONFIGURE_ENV because bsd.port.mk handles that
|
Wed, 25 Mar 2015
|
[ 17:36 marino ] (Only the first 10 of 31 ports in this commit are shown above. )
multimedia category: Remove $PTHREAD_LIBS
approved by: PTHREAD blanket
|
Sun, 22 Feb 2015
|
[ 05:09 amdmi3 ]
- Add LICENSE
- Strip libraries
|
Mon, 8 Dec 2014
|
[ 16:48 tijl ] (Only the first 10 of 920 ports in this commit are shown above. )
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used. (Only the first 15 lines of the commit message are shown above )
|
Sat, 13 Sep 2014
|
[ 15:11 tijl ] (Only the first 10 of 140 ports in this commit are shown above. )
devel/glib12 x11-toolkits/gtk12:
- Convert to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Remove patches that renamed include directories and libraries so they
didn't conflict with early development versions of glib/gtk 2.0
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
Tue, 15 Jul 2014
|
[ 18:58 tijl ] (Only the first 10 of 23 ports in this commit are shown above. )
- Convert multimedia/smpeg* to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
|
Fri, 30 May 2014
|
[ 19:59 amdmi3 ]
- Convert USE_BZIP2 to USES
- Use new LIB_DEPENDS syntax
- Switch to USES=libtool, drop .la files
- Strip libraries
|
Mon, 3 Feb 2014
|
[ 13:57 miwi ] (Only the first 10 of 13 ports in this commit are shown above. )
- Stage support
- Convert to USES
|
Fri, 20 Sep 2013
|
[ 20:57 bapt ] (Only the first 10 of 404 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
multimedia)
|
Sat, 18 Feb 2012
|
[ 10:18 mva ] (Only the first 10 of 537 ports in this commit are shown above. )
- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions
Tested by: exp-run by pav
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
Sat, 22 Aug 2009
|
[ 00:28 amdmi3 ] (Only the first 10 of 287 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with M
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
Fri, 6 Jun 2008
|
[ 13:48 edwin ] (Only the first 10 of 149 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
Thu, 13 Mar 2008
|
[ 14:28 miwi ] (Only the first 10 of 442 ports in this commit are shown above. )
- Chase devel/sdl12 shlib version bump
|
Sat, 19 May 2007
|
[ 20:32 flz ] (Only the first 10 of 7868 ports in this commit are shown above. )
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
Sat, 10 Feb 2007
|
[ 06:05 kris ] (Only the first 10 of 73 ports in this commit are shown above. )
Use libtool15 port instead of included version to avoid objformat a.out botch
|
Wed, 20 Sep 2006
|
[ 11:21 stas ] (Only the first 10 of 453 ports in this commit are shown above. )
- Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
structure (i.e. include/SDL for includes and sdl-config for configuration
binary)
- Update graphics/sdl_ttf to version 2.0.8
- Update graphics/sdl_image to version 1.2.5
- Update audio/sdl_mixer to version 1.2.7
- Update net/sdl_net to version 1.2.6
- Update Mk/bsd.sdl.mk accordingly
- Fix dependent ports to fit the new directory structure and avoid several
API breakages
- Bump up portrevisions for all dependent ports to allow them to be upgraded
by portupgrade/portmaster etc tools
Approved by: kris (portmgr), sem (mentor)
|
Wed, 10 May 2006
|
[ 22:37 edwin ] (Only the first 10 of 328 ports in this commit are shown above. )
Remove USE_REINPLACE from ports starting with M
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
Thu, 2 Jun 2005
|
[ 20:28 oliver ] (Only the first 10 of 60 ports in this commit are shown above. )
change the libtool version to use from 1.3 to 1.5
|
Tue, 16 Mar 2004
|
[ 04:23 edwin ] (Only the first 10 of 193 ports in this commit are shown above. )
Chase library bump of libSDL-1.1 for all ports which were depending
on sdl12-1.2.5
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
Wed, 4 Feb 2004
|
[ 05:10 marcus ] (Only the first 10 of 1422 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
|
Fri, 23 Jan 2004
|
[ 21:59 edwin ]
Use USE_SDL macros in these ports.
|
Wed, 10 Dec 2003
|
[ 13:35 fjoe ]
USE_MESA -> USE_GL
|
Sun, 20 Apr 2003
|
[ 19:35 marcus ] (Only the first 10 of 31 ports in this commit are shown above. )
Remove USE_GNOMENG.
|
Fri, 4 Apr 2003
|
[ 01:38 lioux ] (Only the first 10 of 38 ports in this commit are shown above. )
After repo copy from graphics category to newly create multimedia
one, update all appropriate references: *_DEPENDS, CATEGORIES
Repo copied by: cvs (joe)
Approved by: portmgr (self & no objections)
|
Number of commits found: 35 |