| non port: net-im/telepathy-qt/Makefile |
|
SVNWeb
|
Number of commits found: 37 |
|
Sun, 11 Sep 2022
|
[ 10:20 Felix Palmen (zirias)  ]    ddae4e9 (Only the first 10 of 1105 ports in this commit are shown above.  )
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 103413d (Only the first 10 of 87 ports in this commit are shown above. )
net-im: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Alberto Villa <avilla@FreeBSD.org>
* Alexander Logvinov <ports@logvinov.com>
* Alexander Timoshenko <gonzo@univ.kiev.ua>
* Andrew Lewis <freeghb@gmail.com>
* Andrey Akhmichin <sepulkarium45@yahoo.com>
* Bartek Rutkowski <r@robakdesign.com>
* Bernard Spil <brnrd@freebsd.org>
* Brendan Molloy <brendan+freebsd@bbqsrc.net>
* Denis Shaposhnikov <dsh@vlink.ru> (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 30 Apr 2022
|
[ 08:03 Tobias C. Berner (tcberner) ] ca3f925 (Only the first 10 of 133 ports in this commit are shown above. )
framework: convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert ports tree to make use of USES=gstreamer
- remove duplicate dependency lines from the tree
Differential Revision: https://reviews.freebsd.org/D35097
|
|
Sun, 10 Apr 2022
|
[ 19:11 Charlie Li (vishwin) ] d63665f (Only the first 10 of 892 ports in this commit are shown above. )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
|
|
Sat, 26 Mar 2022
|
[ 08:27 Matthias Fechner (mfechner) ] 247c7db (Only the first 10 of 867 ports in this commit are shown above. )
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sun, 27 Sep 2020
|
[ 06:48 tcberner ]  
net-im/telepathy-qt: "switch" to gstreamer1
- the port was already picking up gstreamer1, as it was
installed through dependencies.
- this reduces the number of ports which still "seem" to use
gstreamer0 by 1
Reported by: bapt
|
|
Mon, 16 Mar 2020
|
[ 20:10 tcberner ]
net-im/telepathy-qt: remove unnecessary lock on python2
- switch to python3
|
|
Fri, 13 Dec 2019
|
[ 20:30 tcberner ]
net-im/telepathy-qt: update to 0.9.8
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Sat, 16 Mar 2019
|
[ 19:13 tcberner ] (Only the first 10 of 18 ports in this commit are shown above. )
net-im/telepathy-qt: remove flavors (Qt4 deprecation)
|
|
Wed, 16 Jan 2019
|
[ 11:13 tijl ] (Only the first 10 of 1089 ports in this commit are shown above. )
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 25 Dec 2018
|
[ 20:25 tcberner ] (Only the first 10 of 1277 ports in this commit are shown above. )
Change cmake default behaviour to outsource.
Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".
I tried to only set insource where explictely needed.
PR: 232038
Exp-run by: antoine
|
|
Sun, 16 Dec 2018
|
[ 16:49 rene ] (Only the first 10 of 19 ports in this commit are shown above. )
Use regular DEPRECATED and EXPIRATION_DATE variables in an "if FLAVOR" block
instead of flavoring the variables themselves. This caused too much hassle
for Tools/scripts/rmport.
Discussed with: tcberner
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Sun, 2 Dec 2018
|
[ 15:41 rene ] (Only the first 10 of 464 ports in this commit are shown above. )
Mark QT4 ports/functionality for removal on 2019-03-15
While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.
Submitted by: tcberner
Reviewed by: adridg, jhale, rene, tcberner
Approved by: portmgr (implicit, flavor hook)
Differential Revision: https://reviews.freebsd.org/D17741
|
|
Sat, 20 Oct 2018
|
[ 16:51 tcberner ]
net-im/telepathy-qt: fix build with GCC-based architectures of qt5 flavor
PR: 232260
Submitted by: Piotr Kubaj <pkubaj@anongoth.pl>
|
|
Sun, 7 Oct 2018
|
[ 13:43 tcberner ] (Only the first 10 of 35 ports in this commit are shown above. )
net-im/telepathy-qt[45]: falvorize
Flavorize the ports:
* telepathy-qt4 -> telepathy-qt@qt4
* telepathy-qt5 -> telepathy-qt@qt5
While here, also clean up the Makefile a bit.
Approved by: portmgr (mat)
Differential Revision: https://reviews.freebsd.org/D17445
|
|
Sun, 17 Nov 2013
|
[ 21:54 rakuco ]
Deprecate net-im/tapioca-qt and net-im/telepathy-qt.
Both projects have been dead upstream since 2007, and no port depends on
them. telepathy-qt is not to be confused with net-im/telepathy-qt4.
|
|
Fri, 20 Sep 2013
|
[ 22:13 bapt ] (Only the first 10 of 186 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
net-im)
|
|
Mon, 2 Sep 2013
|
[ 17:09 bapt ]
Add an explicit dependency on pkgconf
|
|
Fri, 22 Mar 2013
|
[ 20:06 makc ] (Only the first 10 of 464 ports in this commit are shown above. )
- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
for users
Approved by: portmgr (miwi)
|
|
Wed, 6 Jun 2012
|
[ 06:44 miwi ] (Only the first 10 of 587 ports in this commit are shown above. )
- Convert USE_QT_VER=4 and QT_COMPONETS to USE_QT4
Review by: bapt, David Naylor (kde team)
|
|
Mon, 14 Nov 2011
|
[ 03:26 rakuco ] (Only the first 10 of 56 ports in this commit are shown above. )
Remove CMAKE_USE_PTHREAD from the ports using it.
This setting has not had any effect since r1.13 to bsd.cmake.mk, as it
was only useful when we supported FreeBSD < 7.
Approved by: avilla (mentor), portmgr (miwi)
Feature safe: yes
|
|
Fri, 4 Jun 2010
|
[ 21:41 kwm ]
Instead of only 1 LGPL license there are two namely: the 2.1 and 3 version.
So make a LGPL21 and LGPL3 value for the license framework.
Replace the LGPL used in ports with LGPL21. (checked all consumers)
Obtained from: http://www.gnu.org/licenses/ (Under License URL's)
|
|
Tue, 1 Jun 2010
|
[ 05:27 arved ]
Fix path to license file
Reported by: pointyhat
|
|
Sun, 30 May 2010
|
[ 17:39 arved ] (Only the first 10 of 27 ports in this commit are shown above. )
Add LICENSE and LICENSE_FILE to my ports.
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Sat, 22 Aug 2009
|
[ 00:32 amdmi3 ] (Only the first 10 of 341 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with N
|
|
Fri, 7 Aug 2009
|
[ 09:10 miwi ]
- Fix build after qt update
|
|
Tue, 24 Mar 2009
|
[ 19:13 makc ] (Only the first 10 of 131 ports in this commit are shown above. )
bump PORTREVISION after cmake update
|
|
Fri, 1 Aug 2008
|
[ 09:46 arved ]
Remove unneeded rundeps on qt4 buildtools
PR: 123362
Submitted by: Max Brazhnikov
|
|
Fri, 6 Jun 2008
|
[ 13:51 edwin ] (Only the first 10 of 73 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Tue, 27 May 2008
|
[ 22:12 miwi ] (Only the first 10 of 48 ports in this commit are shown above. )
- Add common code to support for cmake based ports.
- Update devel/cmake to 2.6.0 (also fix ports/123092)
- Use the new CMAKE build framework in all ports using cmake
Approved by: portmgr (pav)
|
|
Mon, 18 Feb 2008
|
[ 20:37 arved ]
Add forgotten dependency on cmake
pointyhat to: arved
|
|
Sun, 10 Feb 2008
|
[ 16:42 arved ]
Add telepathy-qt, a Qt implementation of the telepathy project
|
Number of commits found: 37 |
As an Amazon Associate I earn from qualifying purchases.