| non port: net-mgmt/ipv6calc/Makefile |
|
SVNWeb
|
Number of commits found: 58 |
|
Sat, 27 May 2023
|
[ 04:07 Po-Chuan Hsieh (sunpoet)  ]    39066bd
net-mgmt/ipv6calc: Cosmetic change
|
|
Wed, 17 May 2023
|
[ 16:30 Muhammad Moinur Rahman (bofh) ] 9b178ff (Only the first 10 of 108 ports in this commit are shown above.  )
*/*: llvm15 build fixes
llvm15 was also merged into 13.2-STABLE effective from OSVERSION
1302505. Fix the ports that failed to build with llvm15.
Approved by: portmgr (blanket)
|
|
Tue, 2 May 2023
|
[ 13:52 Muhammad Moinur Rahman (bofh) ] 8f88b04
net-mgmt/ipv6calc: Unbreak on HEAD
Approved by: portmgr (blanket)
|
|
Mon, 30 Jan 2023
|
[ 12:59 Po-Chuan Hsieh (sunpoet) ] bb8bb28
net-mgmt/ipv6calc: Update to 4.0.2
Changes: https://github.com/pbiering/ipv6calc/releases
|
|
Mon, 3 Oct 2022
|
[ 02:14 Po-Chuan Hsieh (sunpoet) ] 6169673
net-mgmt/ipv6calc: Update to 4.0.1
- Update MASTER_SITES
- Update WWW
- Update pkg-descr
- Take maintainership
Changes: https://github.com/pbiering/ipv6calc/releases
|
|
Sat, 24 Sep 2022
|
[ 13:05 Danilo G. Baio (dbaio) ] 907f709
*: Release a few ports to the pool
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 43ac3e2 (Only the first 10 of 285 ports in this commit are shown above. )
net-mgmt: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* @BABOLO <.@babolo.ru>
* Alex Samorukov, samm@freebsd.org
* Alexander Kriventsov <avk@vl.ru>
* Alexander Sulfrian <alexander@sulfrian.net>
* Alexander Y. Grigoryev <alexander.4mail@gmail.com>
* Alexandre Biancalana <ale@biancalanas.net>
* Alexandre Snarskii <snar@paranoia.ru>
* Alexandre Snarskii <snar@snar.spb.ru>
* Alexey Bobkov <mr.deadlystorm@gmail.com>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alexey V. Degtyarev (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 25 Apr 2022
|
[ 14:12 Piotr Kubaj (pkubaj) ] 202012d
net-mgmt/ipv6calc: remove workaround for powerpc*
The port now builds fine.
|
|
Sun, 18 Jul 2021
|
[ 13:56 Danilo G. Baio (dbaio) ] 5924d50
net-mgmt/ipv6calc: Update to 3.2.0
Changelog: https://raw.githubusercontent.com/pbiering/ipv6calc/3.2.0/ChangeLog
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sun, 17 Jan 2021
|
[ 13:12 dbaio ]  
net-mgmt/ipv6calc: Update to 3.0.2
Changelog: https://raw.githubusercontent.com/pbiering/ipv6calc/3.0.2/ChangeLog
|
|
Sat, 16 Jan 2021
|
[ 12:30 dbaio ]
net-mgmt/ipv6calc: Update to 3.0.1
Changelog: https://raw.githubusercontent.com/pbiering/ipv6calc/3.0.1/ChangeLog
|
|
Mon, 16 Nov 2020
|
[ 23:33 dbaio ]
net-mgmt/ipv6calc: Update to 3.0.0
Changelog: https://raw.githubusercontent.com/pbiering/ipv6calc/3.0.0/ChangeLog
|
|
Mon, 24 Aug 2020
|
[ 23:55 dbaio ]
net-mgmt/ipv6calc: Fix build on 13-CURRENT
https://github.com/pbiering/ipv6calc/issues/15
Reported by: pkg-fallout
|
|
Sat, 2 Nov 2019
|
[ 14:09 dbaio ]
net-mgmt/ipv6calc: Update to 2.2.0
|
|
Wed, 9 Oct 2019
|
[ 12:17 bapt ] (Only the first 10 of 103 ports in this commit are shown above. )
Drop the ipv6 virtual category for n* category as it is not relevant anymore
|
|
Sun, 8 Sep 2019
|
[ 19:13 dbaio ]
net-mgmt/ipv6calc: Update to 2.1.1
|
|
Sun, 17 Feb 2019
|
[ 12:14 dbaio ]
net-mgmt/ipv6calc: Update to 2.0.0
|
|
Wed, 24 Oct 2018
|
[ 22:52 dbaio ]
net-mgmt/ipv6calc: Fix build with mips, mips64 and powerpc64
Base GCC doesn't support -Wno-unknown-warning-option.
PR: 232515 [1]
Submitted by: Piotr Kubaj <pkubaj@anongoth.pl> [1]
Sponsored by: IntegriCloud [1]
|
|
Mon, 15 Oct 2018
|
[ 23:33 dbaio ]
net-mgmt/ipv6calc: Update to 1.1.0
Changes: https://github.com/pbiering/ipv6calc/releases/tag/1.1.0
|
|
Mon, 2 Jul 2018
|
[ 04:00 linimon ] (Only the first 10 of 60 ports in this commit are shown above. )
Mark ports broken on mips64 that are already broken on powerpc64. In
most cases, the failure mode is the same. Also, mark them broken on
mips when necessary.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
|
|
Mon, 3 Jul 2017
|
[ 23:37 dbaio ]
net-mgmt/ipv6calc: Update to 1.0.0
Improve port with DATADIR macro (pkg-plist) and shebangfix
Changes: https://github.com/pbiering/ipv6calc/releases/tag/1.0.0
Approved by: garga (mentor, implicit)
|
|
Sat, 13 May 2017
|
[ 23:36 linimon ] (Only the first 10 of 16 ports in this commit are shown above. )
Mark some ports failing on power64. In cases where the error message
was a stub, provide a real one.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
|
|
Mon, 8 May 2017
|
[ 17:21 dbaio ] (Only the first 10 of 66 ports in this commit are shown above. )
Update my email address
Approved by: garga (mentor)
Differential Revision: https://reviews.freebsd.org/D10648
|
|
Tue, 10 Jan 2017
|
[ 02:43 junovitch ]
net-mgmt/ipv6calc: update 0.99.1 -> 0.99.2
Changelog: https://github.com/pbiering/ipv6calc/releases/tag/0.99.2
PR: 215784
Submitted by: Danilo G. Baio <dbaio@bsd.com.br> (maintainer)
|
|
Sun, 18 Dec 2016
|
[ 16:12 ehaupt ]
Update to 0.99.1 and pass maintainer-ship to submitter.
PR: 215364
Submitted by: dbaio@bsd.com.br
|
|
Fri, 25 Nov 2016
|
[ 09:31 amdmi3 ]
- Add LICENSE
- Strip binary
- Regenerate patches
|
|
Wed, 16 Nov 2016
|
[ 22:55 rene ] (Only the first 10 of 41 ports in this commit are shown above. )
Reset edwin's ports, he has handed in his commit bit.
With hat: portmgr-secretary
|
|
Wed, 19 Feb 2014
|
[ 10:15 edwin ]
Add perl5 to USES statement to make the pkg-fallout-builder happy.
|
|
Fri, 14 Feb 2014
|
[ 10:49 edwin ]
Upgrade to version 0.96.0
use of md5 bundled code will be only used if not available on the system
(external md5 is currently only supported via openssl library).
Old behavior can be triggered using:
--enable-bundled-md5 (and for getopt: --enable-bundled-getopt)
ipv6calcweb.cgi was extended for supporting the new outputformat
"textkeyvalue", which can be parsed easier in scripts, example:
http://ip.bieringer.de/cgi-bin/ipv6calcweb.cgi?format=textkeyvalue
ipv6calc binaries can be build using shared libraries internally to save
space on disk with configure option: --enable-shared
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 12 Feb 2014
|
[ 10:16 miwi ]
- Stage support
|
|
Fri, 20 Sep 2013
|
[ 22:24 bapt ] (Only the first 10 of 336 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
net-mgmt)
|
|
Fri, 26 Apr 2013
|
[ 12:07 edwin ]
Update to version 0.94.0
Major extensions:
ipv6calc/ipv6loganon/ipv6logstats
- IID privacy detection
- implement filter mode (-A filter) [very helpful if used in pipe mode]
- reliable IPv6 address anonymization (means all IPv6 address type
information is kept while anonymize the rest [SLA, unique values in IID]
- support MAC address input in Cisco format xxxx.xxxx.xxxx
- support OUI-36
|
|
Wed, 24 Apr 2013
|
[ 18:10 ak ] (Only the first 10 of 1028 ports in this commit are shown above. )
- Convert USE_GETTEXT to USES (part 3)
Approved by: portmgr (bapt)
|
|
Fri, 3 Aug 2012
|
[ 15:54 cs ] (Only the first 10 of 88 ports in this commit are shown above. )
Fix typos and make small modifications in COMMENT (according to Porter's
Handbook)
Approved by: portmgr@ (implicit)
|
|
Mon, 31 May 2010
|
[ 02:01 ade ] (Only the first 10 of 1416 ports in this commit are shown above. )
Bounce PORTREVISION for gettext-related ports. Have fun, ya'll.
|
|
Fri, 14 Aug 2009
|
[ 04:36 edwin ]
Update to 0.73.0:
Minor changes:
ipv6calc/ipv6calc.c
- add auto-output format detection for revnibble
- do not print resultstring, if empty
- add support for '-m' for '--in -?'
- add support for '-m' for '--out|action -?'
ipv6calc/test_ipv6calc.sh
- add input validation tests
lib/ipv6calchelp.[ch]
- support machine readable output for input types
- support machine readable output for output/action types
lib/libipv4addr.c
lib/libipv6addr.c
lib/librfc1886.c
- improve input validation
databases/registries/update-registries.sh
- fix IANA ipv6-unicast-address-assignments weblink problem
|
|
Tue, 16 Jun 2009
|
[ 09:39 edwin ]
Update to 0.72.2
|
|
Fri, 6 Mar 2009
|
[ 23:19 edwin ]
Fix build of net-mgmt/ipv6calc
PR: ports/132350
Submitted by: KOIE Hidetaka <koie@suri.co.jp>, pav@ earlier, erwin@ earlier
|
|
Mon, 12 Jan 2009
|
[ 10:56 edwin ]
Update to 0.72.1
|
|
Tue, 23 Dec 2008
|
[ 09:06 edwin ]
Update to 0.72.0
Major new features:
- support ORCHID
- detect link-local-teredo addresses
- add octal output for IPv4
- add hex output for IPv4 & IPv6
|
|
Fri, 6 Jun 2008
|
[ 13:53 edwin ] (Only the first 10 of 33 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Sat, 2 Jun 2007
|
[ 22:16 edwin ]
Upgrade to 0.71.0
|
|
Mon, 2 Apr 2007
|
[ 19:06 edwin ]
Add missing files, as requested by kris-mail
|
|
Sun, 1 Apr 2007
|
[ 22:28 edwin ]
Update to 0.70.0:
Major changes since 0.61.0
- remove IP2Location and GeoIP files, add related configure options
instead (thanks to Niko Tyni for contribution)
--with-ip2location-headers=DIR
IP2Location include files location
--with-ip2location-lib=DIR
IP2Location library location
--with-ip2location-static
Explicitly link IP2Location statically
(default=no)
--with-geoip-headers=DIR(Only the first 15 lines of the commit message are shown above )
|
|
Tue, 29 Aug 2006
|
[ 02:01 edwin ]
Update to 0.61.0
|
|
Mon, 10 Jul 2006
|
[ 23:27 edwin ]
Update to 0.60.1
Fix plist
|
|
Mon, 26 Jun 2006
|
[ 12:19 edwin ]
Upgrade to version 0.60.0
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Sun, 12 Feb 2006
|
[ 20:10 edwin ]
upgrade to 0.51
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Thu, 15 Sep 2005
|
[ 23:00 edwin ]
[ipv6calc-announce] New version 0.50 released
20050915/PB
various c files
- fix snprintf size parameter (credits to
Radek Vok?l for pointing this out)
lib/libipv6addr.c#ipv6addr_copy
- fix bug which causes stack overflow (credits to
Radek Vok?l for finding the bug)
several Makefiles
- add compiler switch -O2, reason for segfault was found
- remove also static on clean
ipv6logconv:
- add support for unique local unicast
update databases
|
|
Wed, 14 Sep 2005
|
[ 23:03 edwin ]
Upgrade to 0.49
20050914/PB
Update databases
20050725/PB
lib/libipv6addr
ipv6calc/showinfo
- add support for Unique Local IPv6 Unicast Addresses
20050719/PB
md5/md5.c
- fix for proper support of big endian machines
lib/libipv6addr
- replace hardcoded IPv6 assignement by dynamic one(Only the first 15 lines of the commit message are shown above )
|
|
Sun, 21 Nov 2004
|
[ 21:19 edwin ]
Update to version 0.48
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Sat, 28 Feb 2004
|
[ 12:10 edwin ]
Update to 0.47
|
|
Mon, 23 Feb 2004
|
[ 04:42 wollman ] (Only the first 10 of 907 ports in this commit are shown above. )
Say hello to the new "net-mgmt" category. There are probably more
ports that belong here than the ones I have identified and moved in
this, first, pass.
Approved in principle by: marcus
|
Number of commits found: 58 |
As an Amazon Associate I earn from qualifying purchases.