notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
non port: net-mgmt/nrpe2/Makefile
SVNWeb

Number of commits found: 28

Fri, 20 Sep 2013
[ 22:24 bapt search for other commits by this committer ] Original commit   Revision:327757 (Only the first 10 of 336 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
net-mgmt)
Wed, 21 Aug 2013
[ 13:36 skreuzer search for other commits by this committer ] Original commit   Revision:325128
Update to 2.14

PR:		ports/180447
Submitted by:	Steven Kreuzer <skreuzer@FreeBSD.org>
Approved by:	maintainer timeout (42 days)
Sat, 3 Aug 2013
[ 13:44 mat search for other commits by this committer ] Original commit   Revision:324191 (Only the first 10 of 124 ports in this commit are shown above. View all ports for this commit)
- Convert to new perl framework
- Remove MAKE_JOBS_SAFE=yes, it's the default.
Wed, 24 Jul 2013
[ 12:45 culot search for other commits by this committer ] Original commit   Revision:323592
- Reassign to the heap

PR:		ports/180754
Submitted by:	Jarrod Sayers <jarrod@downtools.com.au> (maintainer)
Mon, 8 Oct 2012
[ 08:15 dougb search for other commits by this committer ] Original commit   Revision:305521
Fix the currently-broken rc.d script:

1. Tidy up the header
2. nrpe2 runs as an unpriviliged user, so REQUIRE: LOGIN is manadatory
3. Move load_rc_config up higher
4. Since _enable and _configfile are mandatory they should use :=
5. Only sets command_args once, and puts -d last as is traditional.
6. Pulls the pidfile from nrpe.cfg, which means it only has to be set once.
Wed, 12 Sep 2012
[ 20:57 crees search for other commits by this committer ] Original commit   Revision:304163
Improve rc script handling of pidfile, and do a few optimisations

PR:		ports/168225
Submitted by:	yar (based on)

While here, copy over default config file on install
Mon, 10 Sep 2012
[ 15:14 bdrewery search for other commits by this committer ] Original commit   Revision:304038
- Switch to using USERS/GROUPS [1]
- Convert to new options framework

PR:		ports/169918 [1]
Submitted by:	bdrewery
Approved by:	Jarrod Sayers <jarrod@downtools.com.au> (maintainer) [1]
Approved by:	eadler, bapt (mentors, implicit)
Sat, 18 Feb 2012
[ 17:21 scheidell search for other commits by this committer ] Original commit 
- Update to 2.13 [1]
- add check for empty dir in pkg-plist

PR:             ports/164908 [1]
Submitted by:   Marc Peters <marc.peters@trivago.com> [1]
Approved by:    jarrod@downtools.com.au (maintainer), gabor (mentor, implicit)
Feature safe:   yes
Thu, 30 Dec 2010
[ 17:46 ohauer search for other commits by this committer ] Original commit 
- update mainer email address (old domain no longer reachable)
- remove MD5
Fri, 29 Oct 2010
[ 16:34 jpaetzel search for other commits by this committer ] Original commit 
Revert commit 1.8 to pkg-plist.

Approved by:    Oliver Fromme <olli@lurza.secnetix.de>
Thu, 28 Oct 2010
[ 03:27 jpaetzel search for other commits by this committer ] Original commit 
Create proper default directory for pidfile

PR:     ports/151230
Submitted by:   Eric F Crist <ecrist@secure-computing.net>
Approved by:    Maintainer timeout
Sat, 22 Aug 2009
[ 00:32 amdmi3 search for other commits by this committer ] Original commit  (Only the first 10 of 341 ports in this commit are shown above. View all ports for this commit)
- Switch SourceForge ports to the new File Release System: categories starting
with N
Thu, 25 Dec 2008
[ 20:24 miwi search for other commits by this committer ] Original commit 
- Modify rc.d script to allow administrator to change PID file location
  without editing rc.d script.  New knob nrpe2_pidfile is provided for
  this and it defaults to the old value of the PID file.
- Bump PORTREVISION

PR:             129386
Submitted by:   Eygene Ryabinkin <rea-fbsd@codelabs.ru>
Approved by:    maintainer
Fri, 21 Nov 2008
[ 21:00 miwi search for other commits by this committer ] Original commit 
- Update to 2.12

Included in this PR is reload support requested by ports/126476 in addition to a
change in the location of the PID file. I have however opted to move this file
to
NAGIOSDIR to reduce the number of directories created by all Nagios related
ports.

PR:             128409
Submitted by:   Jarrod Sayers <jarrod@netleader.com.au> (maintainer)
Fri, 6 Jun 2008
[ 13:53 edwin search for other commits by this committer ] Original commit  (Only the first 10 of 33 ports in this commit are shown above. View all ports for this commit)
Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)
Wed, 20 Feb 2008
[ 19:18 beech search for other commits by this committer ] Original commit 
- Update to NRPE 2.11.

- Finally bump the port to the current version after remaining at 2.7 for a
while
  due to garbage characters being returned by nrpe2. Issue was caused by the
  reading command buffer not being \0 terminated. This has been resolved in CVS
  but has been back-ported for now.

PR:             ports/120874
Submitted by:   Jarrod Sayers <jarrod@netleader.com.au> (maintainer)
Thu, 26 Jul 2007
[ 13:03 mm search for other commits by this committer ] Original commit 
- remove PREFIX from CONFIGURE_ARGS

Reported by:    sat
Approved by:    garga (mentor, implicit)
Tue, 24 Jul 2007
[ 12:57 mm search for other commits by this committer ] Original commit 
- added support for variables from net-mgmt/nagios
- updated sample configuration file
- renamed startup script from nrpe2.sh to nrpe2
- changed maintainer to Jarrod Sayers <jarrot@netleader.com.au>

PR:             ports/114035
Submitted by:   Jarrod Sayers <jarrot@netleader.com.au>
Approved by:    maintainer, garga (mentor)
Sat, 7 Apr 2007
[ 14:15 rafan search for other commits by this committer ] Original commit 
- Correct pkg-message for rc script variables

PR:             ports/111355
Submitted by:   Dan Langille <dan@langille.org> (maintainer)
Sat, 3 Mar 2007
[ 17:31 clsung search for other commits by this committer ] Original commit 
- Update to 2.7

PR:             ports/109783
Submitted by:   edwin
Approved by:    maintainer (Dan Langille)
Mon, 25 Dec 2006
[ 14:32 rafan search for other commits by this committer ] Original commit 
- Update to 2.6
- Make sure nagios user/group is created when installing from ports
- Pass maintainership to submitter

PR:             ports/107175
Submitted by:   Dan Langille <dan at langille.org>
Tue, 5 Sep 2006
[ 08:04 linimon search for other commits by this committer ] Original commit 
Reset inactive maintainer who has not responded to email.

Hat:            portmgr
Sat, 29 Apr 2006
[ 18:28 mnag search for other commits by this committer ] Original commit 
- Update to 2.5.1
- Fix using USE_OPENSSH after bsd.port.pre.mk
- portlint(1)

PR:             95811
Submitted by:   Martin Matuska <martin___matuska.org>
Approved by:    maintainer timeout (14 days)
Thu, 26 May 2005
[ 19:26 pav search for other commits by this committer ] Original commit 
- add rcng startup script
- make nrpe write pid file in /var/run
- replace pkg-plist file with PLIST_FILES in Makefile

PR:             ports/81139
Submitted by:   Meno Abels <meno.abels@adviser.com>
Approved by:    Paul Dlug <paul@nerdlabs.com> (maintainer)
Tue, 14 Dec 2004
[ 17:12 mharo search for other commits by this committer ] Original commit 
unbreak: port depends on perl while being built
Mon, 13 Dec 2004
[ 19:58 mharo search for other commits by this committer ] Original commit 
add options

unbreak

Approved by:    maintainer timeout
Sun, 19 Sep 2004
[ 01:32 kris search for other commits by this committer ] Original commit 
BROKEN on 5.x: Does not install

Approved by:    portmgr (self)
Sat, 28 Aug 2004
[ 17:56 mharo search for other commits by this committer ] Original commit 
add nrpe2 (after repocopy from net-mgmt/nrpe)

nrpe is Nagios Remote Plugin Executor

PR:             59485

Number of commits found: 28