non port: net/gnet2/Makefile |
SVNWeb
|
Number of commits found: 34 |
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 6a378e5 (Only the first 10 of 1159 ports in this commit are shown above. )
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com> (Only the first 15 lines of the commit message are shown above )
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Fri, 8 Nov 2019
|
[ 13:48 tobik ] (Only the first 10 of 49 ports in this commit are shown above. )
net: Add missing USES={gnome,php}
|
Wed, 9 Oct 2019
|
[ 12:17 bapt ] (Only the first 10 of 103 ports in this commit are shown above. )
Drop the ipv6 virtual category for n* category as it is not relevant anymore
|
Thu, 8 Dec 2016
|
[ 19:52 tijl ] (Only the first 10 of 551 ports in this commit are shown above. )
Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps. Bump dependent ports that have not
been bumped since.
|
Fri, 28 Aug 2015
|
[ 13:39 amdmi3 ] (Only the first 10 of 49 ports in this commit are shown above. )
- Switch to options helpers
- While here, add some NO_ARCHes and couple missing PORT_OPTIONS=DOCS
Approved by: portmgr blanket
|
Thu, 10 Jul 2014
|
[ 12:13 olgeni ] (Only the first 10 of 193 ports in this commit are shown above. )
Remove indefinite articles and trailing periods from COMMENT, plus minor
COMMENT typos and surrounding whitespace fixes. A few Makefiles where not
included as they contain Latin-1 characters that break the Phabricator
workflow. Category N.
CR: D307
Approved by: portmgr (bapt)
|
Wed, 21 May 2014
|
[ 00:50 amdmi3 ]
- Switch to USES=libtool, drop .la file
- Properly support DOCS option
- Strip library
PR: 189876
Submitted by: amdmi3
Approved by: kwm
|
Sat, 1 Mar 2014
|
[ 18:03 miwi ]
- Stage support
|
Fri, 20 Sep 2013
|
[ 22:10 bapt ] (Only the first 10 of 1288 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
net)
|
Tue, 23 Apr 2013
|
[ 14:20 bapt ] (Only the first 10 of 407 ports in this commit are shown above. )
Finish converting the whole ports tree to USES=pkgconfig
|
Fri, 8 Mar 2013
|
[ 10:51 kwm ] (Only the first 10 of 417 ports in this commit are shown above. )
* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
eliminate pkg-config run dependency completely, a second phase is needed
and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
versions for some ports.
* Fix other ports so they build with the new glib version.
Thanks to miwi and crees for helping out with some exp-runs.
Approved by: portmgr (miwi & bapt)
Obtained from: gnome team repo
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
Fri, 6 Jun 2008
|
[ 13:50 edwin ] (Only the first 10 of 181 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
Tue, 4 Mar 2008
|
[ 14:57 kwm ]
Update to 2.0.8.
|
Sun, 28 Jan 2007
|
[ 09:07 kris ] (Only the first 10 of 103 ports in this commit are shown above. )
Use libtool port instead of included one to avoid objformat a.out botch
|
Thu, 21 Dec 2006
|
[ 08:20 mezz ]
The ipv6 is supported in these ports, so add ipv6 category.
PR: ports/106892 and ports/106894
Submitted by: Janos Mohacsi <janos.mohacsi@bsd.hu>
|
Sun, 5 Nov 2006
|
[ 03:36 mezz ]
INSTALLS_SHLIB -> USE_LDCONFIG.
Found by: portlint (cports.sh)
|
Thu, 11 May 2006
|
[ 22:49 edwin ] (Only the first 10 of 270 ports in this commit are shown above. )
Remove USE_REINPLACE from all categories starting with N
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
Sat, 5 Nov 2005
|
[ 05:22 marcus ] (Only the first 10 of 1045 ports in this commit are shown above. )
Bump PORTREVISION to chase the glib20 shared library update.
|
Fri, 24 Jun 2005
|
[ 18:36 mezz ]
- Update to 2.0.7. [1]
- I have added a patch to force not bump the shared library version, because I
can't find any info of break compatibility or change of ABI/API. I am
running two apps that depend on it without recompile; it works fine. Also, I
did recompile and they compile fine. If anyone find any problem with this,
let me know.
PR: ports/82616 [1]
Submitted by: Vsevolod Stakhov <vsevolod@highsecure.ru> [1]
|
Sat, 12 Mar 2005
|
[ 10:54 marcus ] (Only the first 10 of 911 ports in this commit are shown above. )
Bump PORTREVISION to chase the glib20 shared lib version change.
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
Mon, 5 Apr 2004
|
[ 03:31 marcus ] (Only the first 10 of 575 ports in this commit are shown above. )
Chase the glib20 update, and bump all affected ports' PORTREVISIONs.
|
Sun, 21 Mar 2004
|
[ 02:19 marcus ]
Update to 2.0.5.
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
Wed, 4 Feb 2004
|
[ 05:10 marcus ] (Only the first 10 of 1422 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
|
Mon, 17 Nov 2003
|
[ 12:29 trevor ] (Only the first 10 of 151 ports in this commit are shown above. )
USE_REINPLACE need be defined only when REINPLACE_CMD is used.
|
Wed, 30 Jul 2003
|
[ 02:10 marcus ]
Update to 2.0.4.
|
Sat, 12 Jul 2003
|
[ 05:30 marcus ]
Add gnet2 after a repo copy from gnet-glib2. gnet2 is the stable Glib-2
based version of the simple network library, GNet.
|
Number of commits found: 34 |