notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Ukraine
NOTE: the WWW: line in pkg-descr was relocated to a WWW= line in Makefile. Each port in FreshPorts has a homepage link. Look for it right after the Description: on each port's home page.

Do I know someone who can pick up a server from 7401 E. Ben White Blvd. Austin TX?

The emphasis is on know, or recommended by someone I know. This is the original FreshPorts server, way past useful: RAID, 8GB RAM, etc. The drives need to be wiped and everything recycled.
non port: net/gtk-vnc/Makefile
SVNWeb

Number of commits found: 58

Wed, 7 Sep 2022
[ 21:10 Stefan E├čer (se) search for other commits by this committer ]    commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  b7f0544  (Only the first 10 of 27931 ports in this commit are shown above. View all ports for this commit)
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 26 Aug 2022
[ 17:02 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:d9b0d9ac4e6b3fc91eb160e6f884d96354caa9bd  commit hash:d9b0d9ac4e6b3fc91eb160e6f884d96354caa9bd  commit hash:d9b0d9ac4e6b3fc91eb160e6f884d96354caa9bd  d9b0d9a  (Only the first 10 of 165 ports in this commit are shown above. View all ports for this commit)
framework: switch tree to using vala.mk

PR:		249940
Thu, 4 Aug 2022
[ 19:25 Neel Chauhan (nc) search for other commits by this committer ]    commit hash:0788dec7efc307d27378362ba5e7ad7178b47622  commit hash:0788dec7efc307d27378362ba5e7ad7178b47622  commit hash:0788dec7efc307d27378362ba5e7ad7178b47622  0788dec 
net/gtk-vnc: Update to 1.3.1
Wed, 20 Jul 2022
[ 14:22 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:6a378e5659b93de6dbe8956246fb3bf971677624  commit hash:6a378e5659b93de6dbe8956246fb3bf971677624  commit hash:6a378e5659b93de6dbe8956246fb3bf971677624  6a378e5  (Only the first 10 of 1159 ports in this commit are shown above. View all ports for this commit)
net: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ports@c0decafe.net>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Adam Jette <jettea46@yahoo.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Bakhtin <Alex.Bakhtin@gmail.com>
  *  Alex Deiter <Alex.Deiter@Gmail.COM>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 24 Jun 2022
[ 17:05 Baptiste Daroussin (bapt) search for other commits by this committer ]    commit hash:e97c5fc45d917576d22ee07e3bf8e25c891fc587  commit hash:e97c5fc45d917576d22ee07e3bf8e25c891fc587  commit hash:e97c5fc45d917576d22ee07e3bf8e25c891fc587  e97c5fc 
net/gtk-vnc: fix pulseaudio option definition
[ 15:17 Baptiste Daroussin (bapt) search for other commits by this committer ]    commit hash:649b3f7fa9217185fb560e917a8b599902976b13  commit hash:649b3f7fa9217185fb560e917a8b599902976b13  commit hash:649b3f7fa9217185fb560e917a8b599902976b13  649b3f7 
net/gtk-vnc: update to 1.3.0
Tue, 6 Apr 2021
[ 14:31 Mathieu Arnold (mat) search for other commits by this committer ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148  (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Wed, 6 Nov 2019
[ 18:58 zeising search for other commits by this committer ] Original commit   Revision:516920 (Only the first 10 of 50 ports in this commit are shown above. View all ports for this commit)
Add USES=xorg USES=gl, ports categories n

Add USES=xorg and USES=gl to ports in categories starting with 'n'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
Wed, 1 May 2019
[ 19:35 rene search for other commits by this committer ] Original commit   Revision:500606 (Only the first 10 of 128 ports in this commit are shown above. View all ports for this commit)
Remove esound support from pulseaudio as audio/esound expired.

Bump PORTREVISIONs of dependent ports.

Build-tested in poudriere on a head-amd64 jail for audio/pulseaudio*
Tue, 2 Oct 2018
[ 08:19 antoine search for other commits by this committer ] Original commit   Revision:481102
Add explicit USES=python
Mon, 26 Mar 2018
[ 10:16 bapt search for other commits by this committer ] Original commit   Revision:465577
Update to 0.7.2
Mon, 22 May 2017
[ 09:20 kwm search for other commits by this committer ] Original commit   Revision:441442
Update gtk-vnc to 0.7.1.

Add gnome to USES, don't depend on bsd.port.mk to do it.
Sat, 11 Feb 2017
[ 11:10 kwm search for other commits by this committer ] Original commit   Revision:433853
Update gtk-vnc to 0.7.0.

MFH:		2017Q1
Security:	79bbb8f8-f049-11e6-8a6a-bcaec565249c
Fri, 1 Apr 2016
[ 14:16 mat search for other commits by this committer ] Original commit   Revision:412348 (Only the first 10 of 2612 ports in this commit are shown above. View all ports for this commit)
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight
Sun, 27 Mar 2016
[ 14:58 tijl search for other commits by this committer ] Original commit   Revision:411990 (Only the first 10 of 183 ports in this commit are shown above. View all ports for this commit)
- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
  supported by libgnutls-dane and gnutls-cli.  Also clarify the option
  description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4.  Some ports used this library
  in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed.  Ports that used these have been
  updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.

net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.

www/hydra: Mark BROKEN.  This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.

PR:		207768
Exp-run by:	antoine
Approved by:	portmgr (antoine)
Wed, 5 Aug 2015
[ 19:13 kwm search for other commits by this committer ] Original commit   Revision:393607 (Only the first 10 of 601 ports in this commit are shown above. View all ports for this commit)
The FreeBSD GNOME team proudly presents GNOME 3.16 for FreeBSD.

The offical GNOME 3.16 release notes can be found at
https://help.gnome.org/misc/release-notes/3.16/

Upgrade instructions for port users:

Delete the old tracker package with:
# pkg delete -f tracker
And user port upgrade tool of choice to upgrade.

Thanks to Antoine Brodin for running the exp-runs.

This release was made possible by the following people:
  Gustau Perez
  Ting-Wei_Lan

PR:		201980
Fri, 2 Jan 2015
[ 18:46 pi search for other commits by this committer ] Original commit   Revision:376062 (Only the first 10 of 104 ports in this commit are shown above. View all ports for this commit)
security/libgcrypt: 1.6.1 -> 1.6.2, bump depends

Changes:
- src/sexp.c (do_vsexp_sscan): Return error for invalid args.
- cipher/md.c (_gcry_md_info): Fix a segv in case of calling
  with wrong parameters.
- cipher/primegen.c (_gcry_generate_elg_prime): Change to return an
  error code, possible NULL deref in call to prime generator.
- cipher/dsa.c (generate): Take care of new return code.
- cipher/elgamal.c (generate): Change to return an error code.  Take
	care of _gcry_generate_elg_prime return code.
- ecc: Support the non-standard 0x40 compression flag for EdDSA.
- mpi: Extend the internal mpi_get_buffer.
- mpi: Fix regression for powerpc-apple-darwin detection.
- Fix bug inhibiting the use of the sentinel attribute in src/gcrypt.h.in
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 19 Nov 2014
[ 11:49 kwm search for other commits by this committer ] Original commit   Revision:372768 (Only the first 10 of 1460 ports in this commit are shown above. View all ports for this commit)
The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.

This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.

Apart from updating ports to newer versions

GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.

Shell Extensions can be installed via https://extensions.gnome.org/ , we have
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 24 Oct 2014
[ 16:21 mva search for other commits by this committer ] Original commit   Revision:371449 (Only the first 10 of 88 ports in this commit are shown above. View all ports for this commit)
- Convert ports of net/ to new USES=python

Approved by:	portmgr (implicit)
Wed, 10 Sep 2014
[ 20:50 gerald search for other commits by this committer ] Original commit   Revision:367888 (Only the first 10 of 3171 ports in this commit are shown above. View all ports for this commit)
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)
Mon, 25 Aug 2014
[ 17:31 amdmi3 search for other commits by this committer ] Original commit   Revision:366111
- Drop .la files, no dependees require them

Approved by:	portmgr blanket
Wed, 30 Jul 2014
[ 03:57 pi search for other commits by this committer ] Original commit   Revision:363436 (Only the first 10 of 94 ports in this commit are shown above. View all ports for this commit)
security/libgcrypt: 1.5.3_3 -> 1.6.1

- Update to 1.6.1
- Remove some unneeded patches
- Fix pkg-plist
- report configure bug upstream
  https://bugs.g10code.com/gnupg/issue1668
- report API breakage downstream and find that MacPorts had the same issue
  https://rt.cpan.org/Ticket/Display.html?id=97201
- bump PORTREVISION for dependent ports (approx. 100 ports)
- Thanks to exp-run by antoine@ to find ports that break
- patch ports that would otherwise break
  security/shishi with PR 192164 is already committed
  [1] devel/ccrtp
  [2] editors/abiword
  [3] security/p5-Crypt-GCrypt

PR:		191256, 192162 [1], 192163 [2], 192166 [3]
Submitted by:	Carlos Jacobo Puga Medina <cjpugmed@gmail.com>
Approved by:	maintainer timeout, antoine (exp-run), portmgr (implicit)
Wed, 23 Jul 2014
[ 10:28 tijl search for other commits by this committer ] Original commit   Revision:362656 (Only the first 10 of 29 ports in this commit are shown above. View all ports for this commit)
Remove two libtool fixes from Mk/Uses/libtool.mk.  They don't always work
when an older version of a package is installed.  This is the case when an
executable links with installed libraries and with uninstalled libraries
that link with other uninstalled libraries.  For each of the directly
linked libraries the executable will have an rpath (/usr/local/lib for the
installed libraries and a path under WRKDIR for each of the uninstalled
libraries), but not for the indirect libraries.  Both ld(1) and rtld(1)
search the rpath of the executable first before any rpath of libraries, so
the indirectly linked libraries will be found in /usr/local/lib if they are
installed instead of in WRKDIR.

With this commit executables will overlink with uninstalled indirect
libraries again so their location is added to the rpath of the executable.

This partially reverts r358784.

PR:		191611
Approved by:	portmgr (bapt)
[ 09:54 tijl search for other commits by this committer ] Original commit   Revision:362645 (Only the first 10 of 139 ports in this commit are shown above. View all ports for this commit)
- Replace security/gnutls with security/gnutls3 and update to 3.2.15
- Bump PORTREVISION on all ports that depend on security/gnutls and
  adjust all ports that depend on security/gnutls3
- Update mail/anubis to version 4.2 which supports gnutls 3.x
- Update mail/libvmime to a development snapshot (recommended by upstream
  developers)

PR:		191274
Exp-run by:	antoine
Approved by:	portmgr (antoine)
Sun, 22 Jun 2014
[ 10:44 tijl search for other commits by this committer ] Original commit   Revision:358784 (Only the first 10 of 37 ports in this commit are shown above. View all ports for this commit)
Add 4 new sed commands to USES=libtool.  The first two apply some of the
changes that Debian made to their libtool.  The first command applies to
libtool versions 1.4 and up.  The second command is somewhat more elaborate
but essentially it uses the sed hold space to move an "elif...fi" block
down.  It applies to 2.x.  Together these reduce overlinking to unpatched
.la files (from ports that don't have USES=libtool yet but also .la files
in the work directory).

The third and fourth command fix relinking.  During staging libtool may
relink libA when it links to another library in the work directory libB.
The reason is that libA created during build phase has its runpath set to
the location of libB in the work directory.  This allows running an
executable that links to libA from within the work directory.  The relink
removes this extra runpath.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 25 Apr 2014
[ 22:56 bapt search for other commits by this committer ] Original commit   Revision:352161
Bump portrevision forgotten previously
[ 22:54 bapt search for other commits by this committer ] Original commit   Revision:352159
Support stage
Switch to USES=libtool
Fri, 20 Sep 2013
[ 22:10 bapt search for other commits by this committer ] Original commit   Revision:327755 (Only the first 10 of 1288 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
net)
Tue, 3 Sep 2013
[ 08:49 bapt search for other commits by this committer ] Original commit   Revision:326129 (Only the first 10 of 53 ports in this commit are shown above. View all ports for this commit)
Add an explicit dependency on pkgconf
Fri, 3 May 2013
[ 16:36 ehaupt search for other commits by this committer ] Original commit   Revision:317220 (Only the first 10 of 95 ports in this commit are shown above. View all ports for this commit)
Chase security/libgcrypt update
Wed, 24 Apr 2013
[ 18:10 ak search for other commits by this committer ] Original commit   Revision:316464 (Only the first 10 of 1028 ports in this commit are shown above. View all ports for this commit)
- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)
Fri, 8 Mar 2013
[ 10:51 kwm search for other commits by this committer ] Original commit   Revision:313633 (Only the first 10 of 417 ports in this commit are shown above. View all ports for this commit)
* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
  are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
  in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
  eliminate pkg-config run dependency completely, a second phase is needed
  and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
  Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
  versions for some ports.
* Fix other ports so they build with the new glib version.

Thanks to miwi and crees for helping out with some exp-runs.
Approved by:	portmgr (miwi & bapt)
Obtained from:	gnome team repo
Tue, 5 Feb 2013
[ 16:17 novel search for other commits by this committer ] Original commit   Revision:311722 (Only the first 10 of 94 ports in this commit are shown above. View all ports for this commit)
- Add UPDATING entry for gnutls update
- Chase shlib version bump for dependant ports
Mon, 10 Dec 2012
[ 15:10 ume search for other commits by this committer ] Original commit   Revision:308609 (Only the first 10 of 62 ports in this commit are shown above. View all ports for this commit)
Update cyrus-sasl2 to 2.1.26.
This bumps shlib version of libsasl2.
Fri, 1 Jun 2012
[ 05:26 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4371 ports in this commit are shown above. View all ports for this commit)
- update png to 1.5.10
Sat, 17 Mar 2012
[ 17:38 mezz search for other commits by this committer ] Original commit 
Fix vinagre and possible other applications when trying to connect to
TightVNC V2. Bump the PORTREVISION.

PR:             ports/166192
Submitted by:   Kevin Oberman <rkoberman@gmail.com>
Obtained from:  Its git.
Feature safe:   yes
Fri, 23 Sep 2011
[ 22:26 amdmi3 search for other commits by this committer ] Original commit  (Only the first 10 of 2369 ports in this commit are shown above. View all ports for this commit)
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav
Sat, 16 Jul 2011
[ 11:37 novel search for other commits by this committer ] Original commit 
Add explicit libgcrypt depencency as it previously were pulled
by gnutls which is no longer the case since gnutls switched to
nettle.

Reported by:            olgeni
Sun, 5 Jun 2011
[ 18:43 novel search for other commits by this committer ] Original commit  (Only the first 10 of 95 ports in this commit are shown above. View all ports for this commit)
Chase security/gnutls update and add an UPDATING entry.
Mon, 31 May 2010
[ 02:01 ade search for other commits by this committer ] Original commit  (Only the first 10 of 1416 ports in this commit are shown above. View all ports for this commit)
Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.
Sun, 28 Mar 2010
[ 06:47 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4470 ports in this commit are shown above. View all ports for this commit)
- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi
Fri, 5 Feb 2010
[ 11:46 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4271 ports in this commit are shown above. View all ports for this commit)
- update to jpeg-8
Sat, 28 Nov 2009
[ 20:06 marcus search for other commits by this committer ] Original commit  (Only the first 10 of 823 ports in this commit are shown above. View all ports for this commit)
Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sun, 16 Aug 2009
[ 18:04 novel search for other commits by this committer ] Original commit  (Only the first 10 of 65 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISIONs of the gnutls dependant ports to chase gnutls update.
Tue, 11 Aug 2009
[ 21:17 kwm search for other commits by this committer ] Original commit 
Add dependency on sasl2.

Submitted by:   pointyhat (via erwin)
[ 13:20 kwm search for other commits by this committer ] Original commit 
Update to 0.3.9.
Fri, 31 Jul 2009
[ 13:57 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 3009 ports in this commit are shown above. View all ports for this commit)
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin
Tue, 13 Jan 2009
[ 07:41 marcus search for other commits by this committer ] Original commit 
Update to 0.3.8.
Sat, 10 Jan 2009
[ 05:22 marcus search for other commits by this committer ] Original commit  (Only the first 10 of 718 ports in this commit are shown above. View all ports for this commit)
Presenting GNOME 2.24 for FreeBSD.

See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes.  On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs.  The documentation updates
to the website are forthcoming.

This release features commits by adamw, ahze, kwm, mezz, and myself.  It would
not have been possible without are contributors and testers:

Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 6 Jun 2008
[ 13:50 edwin search for other commits by this committer ] Original commit  (Only the first 10 of 181 ports in this commit are shown above. View all ports for this commit)
Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)
Thu, 15 May 2008
[ 00:20 marcus search for other commits by this committer ] Original commit 
Update to 0.3.6.
Sat, 19 Apr 2008
[ 17:56 miwi search for other commits by this committer ] Original commit  (Only the first 10 of 2842 ports in this commit are shown above. View all ports for this commit)
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)
Tue, 8 Apr 2008
[ 00:42 ahze search for other commits by this committer ] Original commit 
Update to 0.3.5
Mon, 24 Mar 2008
[ 15:46 ahze search for other commits by this committer ] Original commit 
Update to 0.3.4
Mon, 3 Mar 2008
[ 11:57 novel search for other commits by this committer ] Original commit  (Only the first 10 of 51 ports in this commit are shown above. View all ports for this commit)
- Chase security/gnutls shlib version bump
- Add an entry to UPDATING
Sun, 3 Feb 2008
[ 05:26 marcus search for other commits by this committer ] Original commit 
Update to 0.3.3.
Sun, 20 Jan 2008
[ 19:35 marcus search for other commits by this committer ] Original commit 
Update to 0.3.2.
Sun, 16 Dec 2007
[ 19:32 marcus search for other commits by this committer ] Original commit 
Add gtk-vnc, a GTK+ VNC widget with C and Python bindings.

WWW: http://gtk-vnc.sourceforge.net/

Number of commits found: 58