| non port: net/ldapsh/Makefile |
|
SVNWeb
|
Number of commits found: 25 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 6a378e5 (Only the first 10 of 1159 ports in this commit are shown above. )
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 6 Mar 2018
|
[ 12:32 tobik ]   (Only the first 10 of 11 ports in this commit are shown above. )
Reset MAINTAINER of flz's ports by his request
PR: 195339
|
|
Tue, 21 Jun 2016
|
[ 13:24 mat ] (Only the first 10 of 27 ports in this commit are shown above. )
Rename all three p5-ReadLine-(Gnu,Perl,TTYtter) to their real names
p5-Term-ReadLine-(Gnu,Perl,TTYtter).
I can't find any reason for p5-ReadLine-Gnu to have been added as
ReadLine-Gnu instead of Term-ReadLine-Gnu twenty years ago.
devel/p5-Term-ReadLine-Perl was added as a dupplicate a few years back
where it should not have, so change its maintainer to be perl@ like
devel/p5-ReadLine-Perl had.
Sponsored by: Absolight
|
|
Fri, 1 Apr 2016
|
[ 14:16 mat ] (Only the first 10 of 2612 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 26 Nov 2014
|
[ 13:08 mat ] (Only the first 10 of 10077 ports in this commit are shown above. )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 28 Apr 2014
|
[ 12:46 bapt ] (Only the first 10 of 11 ports in this commit are shown above. )
Stagify a bunch of ports maintained by flz
While here:
- graphics/icoconvert:
* Respect CC
* Use modern LIB_DEPENDS
- net/grdesktop:
* Convert gnomehack to pathfix
- net/ldapsh:
* Use shebangfix instead of custom post-patch target
- net-im/py-jabber:
* Use autoplist
- net-p2p/bnbt:
* Use the options framework
* Convert to dos2unix
* Respect CXX
* Do not renamed base on option
- sysutils/testdisk:
* Update to 6.14
* Use options helpers
* Use modern LIB_DEPENDS
* Convert USE_BZIP2 -> USES=tar:bzip2
|
|
Fri, 20 Sep 2013
|
[ 22:10 bapt ] (Only the first 10 of 1288 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
net)
|
|
Fri, 6 Sep 2013
|
[ 10:47 az ] (Only the first 10 of 19 ports in this commit are shown above. )
- convert to the new perl5 framework
Approved by: portmgr (bapt@, blanket)
|
|
Sat, 30 Jun 2012
|
[ 14:39 az ] (Only the first 10 of 29 ports in this commit are shown above. )
- Remove SITE_PERL from *_DEPENDS
Approved by: portmgr@ (bapt@)
|
|
Sat, 21 Jan 2012
|
[ 17:40 eadler ] (Only the first 10 of 1326 ports in this commit are shown above. )
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.
Explicit duplication > := > = and this just moves ports one step to the left
Approved by: portmgr
|
|
Mon, 20 Jun 2011
|
[ 08:37 az ] (Only the first 10 of 70 ports in this commit are shown above. )
- Replace ../../authors in MASTER_SITE_SUBDIR with CPAN:CPANID macro.
See http://wiki.freebsd.org/Perl for details.
- Change maintainership from ports@ to perl@ for ports in this changeset.
- Remove MD5 checksum
|
|
Sun, 24 Jan 2010
|
[ 06:18 kuriyama ] (Only the first 10 of 20 ports in this commit are shown above. )
- Remove unneeded dependencies which is in perl-5.8.9 dist
(part 4).
Approved by: portmgr (itetcu)
|
|
Thu, 17 Apr 2008
|
[ 14:30 araujo ] (Only the first 10 of 2168 ports in this commit are shown above. )
- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.
PR: ports/122674
Submitted by: Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by: araujo (myself)
Approved by: portmgr (pav)
|
|
Sat, 8 Sep 2007
|
[ 01:02 linimon ] (Only the first 10 of 91 ports in this commit are shown above. )
Welcome bsd.perl.mk. Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.
Work done by: gabor
Sponsored by: Google Summer of Code 2007
Hat: portmgr
|
|
Thu, 11 May 2006
|
[ 22:49 edwin ] (Only the first 10 of 270 ports in this commit are shown above. )
Remove USE_REINPLACE from all categories starting with N
|
|
Wed, 6 Jul 2005
|
[ 09:44 flz ]
- Update WWW: line in pkg-descr.
|
|
Sat, 11 Jun 2005
|
[ 16:13 skv ] (Only the first 10 of 144 ports in this commit are shown above. )
* reflect renaming on CPAN File-Spec to PathTools
+ add devel/p5-PathTools, remove devel/p5-File-Spec
+ update dependencies for all affected ports (make them unconditional),
bump PORTREVISION for these ports
module was renamed
* reflect renaming on CPAN PodParser to Pod-Parser
+ add textproc/p5-Pod-Parser, remove textproc/p5-PodParser
+ update dependencies for all affected ports (make them unconditional),
bump PORTREVISION for these ports
* for all changed ports make dependencies on File::Temp, Digest::MD5,
Storable unconditional
* remove 'CONFIGURE_ARGS= INSTALLDIRS=site' from Makefile's
(this variable is forced by bsd.port.mk now)
* update Class-Autouse to 1.17
* update POE-API-Hooks to 1.05
* make portlint happy (clean IGNORE, convert spaces to tabs and so on)
|
|
Tue, 1 Mar 2005
|
[ 12:28 flz ] (Only the first 10 of 17 ports in this commit are shown above. )
Change my email address in MAINTAINER lines for ports I maintain to
flz@FreeBSD.org.
Approved by: pav (mentor)
|
|
Thu, 30 Dec 2004
|
[ 13:17 sem ]
- Update ldapsh port to 2.00.
- Make use of new SUB_FILES variable.
- Use newly created Makefile.PL.
PR: ports/75537
Submitted by: maintainer
|
|
Sun, 19 Dec 2004
|
[ 19:57 sem ]
- Update to 2.0b1
PR: ports/74516
Submitted by: maintainer
|
|
Mon, 2 Aug 2004
|
[ 09:35 clement ]
- Add missing dependency
Submitted by: maintainer
|
|
Thu, 29 Jul 2004
|
[ 00:26 edwin ]
Added documentation and pkg-message.
Submitted by: Florent Thoumie <flz@xbsd.org>
|
|
Wed, 28 Jul 2004
|
[ 22:36 edwin ]
New port: net/ldapsh - Interactive shell used to administer ldap directories
ldapsh is an interactive shell you can use to administer ldap
directories. It provides an extensible command mechanism, with
most of the necessary builtin commands (such as 'clone', 'edit',
'rm'), and it's relatively easy to add more commands.
It supports configuring multiple LDAP sources, and storing your
UID for each source so you don't have to type them each time.
PR: ports/69721
Submitted by: Florent Thoumie <flz@xbsd.org>
|
Number of commits found: 25 |
As an Amazon Associate I earn from qualifying purchases.