| non port: net/libdnet/Makefile |
|
SVNWeb
|
Number of commits found: 51 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 6a378e5 (Only the first 10 of 1159 ports in this commit are shown above. )
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com> (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 25 Mar 2022
|
[ 13:38 Po-Chuan Hsieh (sunpoet) ] c750f7c
net/py-libdnet: Prepare for py-setuptools 69.10.0 update
Thie fix is split into 2 parts.
- This patch works for both current and upcoming py-setuptools.
- PLIST_FILES change in net/py-libdnet is pending because it is not compatible
with current py-setuptools (57.0.0).
With hat: python
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Wed, 1 May 2019
|
[ 07:31 tobik ]  
net/libdnet: Drop bogus libcheck run dependency
It was added in r498511 to fix the build when devel/check is installed
in the environment. It is not used for anything other than building
a couple of tests that are never run or installed. Instead just
pass --without-check to configure to disable use of it.
PR: 237177
Reported by: Christian Ullrich <chris@chrullrich.net>
|
|
Sat, 13 Apr 2019
|
[ 11:18 bofh ]
net/libdnet: Fix LIB_DEPENDS as MASTERPORT
Reported by: antoine
|
|
Tue, 9 Apr 2019
|
[ 19:37 bofh ]
net/libdnet: Fix build when devel/check is installed
Reported by: gavilaan@googlemail.com richard@highwayman.com
|
|
Fri, 5 Apr 2019
|
[ 22:11 bofh ]
net/libdnet: Update version 1.12=>1.13
I have reviewed the code of net/libdnet. And created a fork as the
development seems stalled by the original author.
- Removed all the codes not related to FreeBSD
- Fix configure script to find related header files and now it builds
relevant source files instead of *-none.c files
- Modernized all build tools configuration file and removed unnecessary
files
- Works at least with PF. Still not working with ipfw2/ipfilter.
The repo location is:
https://github.com/5u623l20/libdnet/
PR: 236642
Submitted by: bofh
Approved by: maintainer-timeout
|
|
Wed, 14 Sep 2016
|
[ 17:52 antoine ]
Unbreak by switching to USE_GITHUB
|
[ 15:59 mat ] (Only the first 10 of 353 ports in this commit are shown above. )
GOOGLE_CODE has gone away.
- If a port has another upstream, remove GOOGLE_CODE
- If a port only has GOOGLE_CODE mark it BROKEN
Some ports have a local mirror configured but for security reasons, it
is not considered upstream.
Sponsored by: Absolight
|
|
Sat, 25 Oct 2014
|
[ 06:45 antoine ]
Unbreak
|
|
Fri, 12 Sep 2014
|
[ 09:16 amdmi3 ]
- Drop .la files, no dependees require them
- Add LICENSE_FILE
Approved by: portmgr blanket
|
|
Sun, 27 Apr 2014
|
[ 15:32 antoine ]
Update to 1.12
PR: ports/187977
Approved by: maintainer timeout (1 month)
|
|
Wed, 26 Feb 2014
|
[ 04:44 miwi ]
- Stage support
|
|
Fri, 20 Sep 2013
|
[ 22:10 bapt ] (Only the first 10 of 1288 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
net)
|
|
Wed, 9 Nov 2011
|
[ 15:26 miwi ] (Only the first 10 of 250 ports in this commit are shown above. )
- Remove WITH_FBSD10_FIX, is no longer needed
|
|
Sat, 29 Oct 2011
|
[ 09:37 kwm ]
Fix build on FreeBSD 10.
Approved by: portmgr (miwi)
|
|
Sat, 22 Aug 2009
|
[ 00:32 amdmi3 ] (Only the first 10 of 341 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with N
|
|
Wed, 29 Apr 2009
|
[ 02:43 pgollucci ]
- This port builds on 8-CURRENT again
Approved by: Robert Gogolok <gogo@cs.uni-sb.de> (maintainer, via private
e-mail)
|
|
Thu, 22 Jan 2009
|
[ 17:53 erwin ]
Mark BROKEN on 8: does not build after the arp-v2 import.
Submitted by: pointyhat
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 4 Jul 2008
|
[ 00:44 araujo ]
- Unbreak jail builds (bpf0 has been here since 3.x).
- Use SF macro.
PR: ports/125001
Submitted by: "Philip M. Gollucci" <pgollucci@p6m7g8.com>
Approved by: "Jonatan B" <onatan@gmail.com> (maintainer)
|
|
Sun, 23 Sep 2007
|
[ 06:10 edwin ]
Remove trailing . from BROKEN message.
|
|
Mon, 16 Jul 2007
|
[ 07:12 miwi ]
- Marked BROKEN Does not build properly without /dev/bpf0.
PR: 113893
Submitted by: Wesley Shields <wxs@atarininja.org>
Approved by: maintainer
|
|
Mon, 12 Mar 2007
|
[ 17:51 tmclaugh ]
Fix py-libdnet.
The py-libdnet port has been seperated out as a slave port to libdnet and
is now dependent on libdnet. py-libdnet now only installs the libdnet
python module. Since files previously owned by py-libdnet are now owned
by its dependency, in order to upgrade correctly, py-libdnet must be
deinstall and then reinstalled manually.
PR: 109262
Submitted by: thierry and me
Approved by: maintainer timeout
|
|
Tue, 30 Jan 2007
|
[ 19:32 pav ]
- Fix after objformat removal
PR: ports/108500
Submitted by: Jonathan <afarsec@012.net.il> (maintainer)
|
|
Mon, 11 Dec 2006
|
[ 16:02 xride ]
Backout previous commit
Approved by: tmclaugh (implicit)
|
[ 14:06 xride ]
Fix pkg-plist info to unbreak net/py-libdnet
PR: 104364
Submitted by: Yonatan <onatan@gmail.com> (maintainer)
Approved by: tmclaugh (implicit)
|
|
Tue, 10 Oct 2006
|
[ 08:19 itetcu ]
Fix typo in previous commit and prevend INDEX breakage
Submitted by: FreshPorts sanity checking
|
[ 08:03 itetcu ]
- Update to 1.11
- doesn't build on 4.x
PR: ports/101665
Submitted by: maintainer (Yonatan)
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Tue, 22 Nov 2005
|
[ 21:55 thierry ]
Build libdnet' Python module in a slave port.
(needed for a to-be-released soon port)
Since I'm there, add SHA256.
Approved by: Jonatan B <onatan (at) gmail.com> (maintainer)
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Wed, 16 Mar 2005
|
[ 22:12 pav ]
- Update to 1.10
- Add knob for python bindings, default off
PR: ports/78774
Submitted by: Jonathan <onatan@gmail.com> (maintainer)
|
|
Sun, 20 Feb 2005
|
[ 17:11 pav ]
- Update to 1.9
PR: ports/77781
Submitted by: Yonatan <onatan@gmail.com> (maintainer)
|
|
Sun, 14 Nov 2004
|
[ 22:26 pav ] (Only the first 10 of 19 ports in this commit are shown above. )
- Update maintainer's email address
PR: ports/73939
Submitted by: Yonatan <onatan@gmail.com> (maintainer)
|
|
Tue, 12 Oct 2004
|
[ 17:36 leeym ]
- add missing files
- add INSTALLS_SHLIB and USE_LIBTOOL_VER
PR: ports/71710
Submitted by: leeym
Approved by: maintainer timeout
|
|
Sun, 15 Aug 2004
|
[ 13:17 vanilla ]
Upgrade to 1.8.
PR: ports/70472
Submitted by: Yonatan Yonatan.at.Xpert.dot.com>
|
|
Sat, 31 Jan 2004
|
[ 00:25 arved ]
Fix build of dependant ports on AMD64
|
|
Thu, 22 Jan 2004
|
[ 22:48 krion ]
- Add CONFIGURE_TARGET to silence configure's warning
|
|
Wed, 24 Sep 2003
|
[ 08:37 edwin ] (Only the first 10 of 17 ports in this commit are shown above. )
Cease FreeBSD port maintainerships
I don't have the time to give to many of the ports I maintain at
the moment. I wasn't expecting to be so busy this summer ...
Please set all my ports back to ports@freebsd.org.
PR: ports/56935
Submitted by: Dominic Marks <dom@wirespeed.org.uk>,Clement Laforet
<sheepkiller@cultdeadsheep.org>,Oliver Eikemeier <eikemeier@fillmore-labs.com>
|
|
Wed, 3 Sep 2003
|
[ 23:28 edwin ]
[PATCH] net/libdnet: unbreak on -CURRENT
[DESCRIBE CHANGES]
This band-aid fix inhibits IPFW detection at configure time.
At least it will allow -CURRENT users to build ports depending
on this one (net/honeyd, net/arpd, net/ttlscan,
security/fragroute).
Note that this doesn't solve the FreeBSD 4.x + IPFW2 case.
Added directory / file: files/configure.patch
Port maintainer (dominic.marks@btinternet.com) is cc'd.
PR: ports/55807
Submitted by: Yann Berthier <yb@sainte-barbe.org>
|
|
Mon, 30 Jun 2003
|
[ 14:09 daichi ]
update net/libdnet: 1.5 --> 1.7
PR: 53891
Submitted by: Dominic Marks <dom@cus.org.uk> (maintainer)
|
|
Tue, 24 Jun 2003
|
[ 01:06 leeym ] (Only the first 10 of 17 ports in this commit are shown above. )
update maintainer's email address.
PR: 53658
Submitted by: Dominic Marks <dom@cus.org.uk>
|
|
Fri, 21 Feb 2003
|
[ 13:15 knu ] (Only the first 10 of 484 ports in this commit are shown above. )
De-pkg-comment.
|
|
Tue, 7 Jan 2003
|
[ 21:36 arved ]
Mark BROKEN on CURRENT, since libdnet does not work with ipfw2
PR: 46822
Submitted by: Dominic Marks <dom@cus.org.uk>
|
|
Sat, 2 Nov 2002
|
[ 04:33 perky ] (Only the first 10 of 16 ports in this commit are shown above. )
Fix typoes on MAINTAINER address.
Submitted by: Dominic Marks <D.Marks@student.umist.ac.uk>
|
|
Thu, 24 Oct 2002
|
[ 07:01 kevlo ]
Upgrade to version 1.5
PR: 44387
Submitted by: Hendrik Scholz <hendrik@scholz.net>
|
|
Tue, 8 Oct 2002
|
[ 12:10 perky ] (Only the first 10 of 16 ports in this commit are shown above. )
Update maintainer address
PR: 43820
Submitted by: Dominic Marks <d.marks@students.umist.ac.uk>
|
|
Mon, 12 Aug 2002
|
[ 06:15 pat ]
Fix maintainer email address
PR: ports/41564
Submitted by: maintainer
|
|
Mon, 27 May 2002
|
[ 01:25 anders ]
Add libdnet, a simplified, portable interface to low-level networking
routines. Complement to pcap.
PR: 37118
Submitted by: Dominic Marks <dominic_marks@btinternet.com>
|
Number of commits found: 51 |
As an Amazon Associate I earn from qualifying purchases.