| non port: net/libproxy-python/Makefile |
|
SVNWeb
|
Number of commits found: 16 |
|
Sat, 10 Sep 2022
|
[ 17:41 Stefan Eßer (se)  Author: Tobias Kortkamp ]    e79fe1a (Only the first 10 of 195 ports in this commit are shown above.  )
Fix WWW in parent/child ports
Many of the WWW are overwritten later which means the wrong value
is used. This did not happen before where the children were either
a) just using the pkg-descr from the parents
b) or had their own separate pkg-descr with custom WWW
Use WWW?= in parents when the child's WWW is different.
Children that use the same WWW as the parent can just inherit it,
i.e., the child WWW can be removed.
Approved by: portmgr (implicit)
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 6a378e5 (Only the first 10 of 1159 ports in this commit are shown above. )
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 28 Dec 2020
|
[ 23:02 antoine ]   (Only the first 10 of 1942 ports in this commit are shown above. )
Drop python 2.7 support from a few ports
With hat: portmgr
|
|
Fri, 22 Jun 2018
|
[ 19:59 tcberner ] (Only the first 10 of 29 ports in this commit are shown above. )
Update net/libproxy to 0.4.15
* this release switched the build system to cmake
* move libproxy-gnome to libproxy-gnome2 for consistency
* add new slave libproxy-webkit3
* try to simplify the whole thing
* bump revisions in the dependencies
Reviewed by: gnome (kwm), mat
Differential Revision: https://reviews.freebsd.org/D15655
|
|
Tue, 12 Dec 2017
|
[ 12:40 antoine ] (Only the first 10 of 23 ports in this commit are shown above. )
- Those ports fail to build with python3
- Add some explicit FLAVOR to dependencies where needed
|
|
Fri, 1 Apr 2016
|
[ 14:16 mat ] (Only the first 10 of 2612 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
|
Tue, 19 Jan 2016
|
[ 10:00 rakuco ] (Only the first 10 of 35 ports in this commit are shown above. )
Update libproxy and its slave ports to 0.4.12.
After being dormant since 2013, libproxy development picked up some steam at
the end of last year, and the project moved from Google Code to GitHub,
where its releases are also being hosted. A summary of changes between 0.4.6
and 0.4.12 can be found here:
https://github.com/libproxy/libproxy/blob/0.4.12/NEWS
The libproxy ports themselves have undergone several changes too:
* net/libproxy
- Drop a lot of patches that are no longer necessary.
- Add a few patches that I have sent upstream, and add some context to the
0.4.6 patches that are still required.
- Explicitly disable a few build options (.NET bindings, for example).
- Switch to an out-of-source CMake build (also applies to the slave(Only the first 15 lines of the commit message are shown above )
|
[ 09:50 rakuco ]
Modernize net/libproxy-python and fix dependencies.
In preparation for updating the libproxy ports to 0.4.12, first land some
changes that also apply to 0.4.6 and can be MFH'ed.
- Make net/libproxy a run-time dependency: we only install .py files in this
port, and they only load libproxy.so when being run. Consequently, also set
NO_ARCH=yes.
- Set NO_BUILD=yes and modernize the installation. Instead of having an empty
do-build target and invoking Python's compileall.py in post-build, do it like
most other ports and call it in post-install (this requires guarding the
post-install target in net/libproxy's Makefile).
We also pass -d to compileall.py to avoid having ${STAGEDIR} in the .pyc and
.pyo files (and shown in exception tracebacks).
- Let the port handle installation instead of defining do-install. We just need
to set INSTALL_WRKSRC appropriately to avoid installing more files than we
want.
Approved by: gnome (kwm)
|
|
Thu, 8 Oct 2015
|
[ 15:12 olgeni ] (Only the first 10 of 83 ports in this commit are shown above. )
Remove trailing whitespace from Makefiles, M-X.
|
|
Fri, 24 Oct 2014
|
[ 16:21 mva ] (Only the first 10 of 88 ports in this commit are shown above. )
- Convert ports of net/ to new USES=python
Approved by: portmgr (implicit)
|
|
Fri, 25 Apr 2014
|
[ 23:03 bapt ]
Support stage
|
|
Mon, 13 Jan 2014
|
[ 21:00 rene ] (Only the first 10 of 702 ports in this commit are shown above. )
Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by: python (mva, rm)
Approved by: portmgr-lurkers (mat)
|
|
Fri, 20 Sep 2013
|
[ 22:10 bapt ] (Only the first 10 of 1288 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
net)
|
|
Tue, 23 Aug 2011
|
[ 18:29 kwm ] (Only the first 10 of 34 ports in this commit are shown above. )
Update to 0.4.6.
|
Number of commits found: 16 |
As an Amazon Associate I earn from qualifying purchases.