09:19 antoine 

Deprecate most glib12 consumers

With hat:	portmgr

 

19:23 tijl 

Remove libiconv.so.3 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

 

14:11 amdmi3 

- No need to specify master site subdirectory when it's the same as default

Approved by:	portmgr blanket

 

14:16 mat 

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

 

07:38 tijl 

Replace USE_AUTOTOOLS=libltdl with an ordinary LIB_DEPENDS in all ports.
There are only 60 such ports so there doesn't need to be a separate
keyword or USES for this.

Approved by:	portmgr (bapt)

 

15:11 tijl 

devel/glib12 x11-toolkits/gtk12:
- Convert to USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Remove patches that renamed include directories and libraries so they
  didn't conflict with early development versions of glib/gtk 2.0

 

14:50 tijl 

Support LIBS like LDFLAGS.

- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS.  Also remove references to
  PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
  required additional patches.

Somewhat simplified a linker command line looks like:

${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}

where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us.  If possible -L and -l flags need to be
added to LIBS to make sure they appear after any -L and -l flags set by
upstream.  Many ports currently add -L${LOCALBASE}/lib to LDFLAGS but this
may appear too early on the command line causing installed libraries to
be linked in instead of freshly built ones.

Additional changes:
benchmarks/netio: Replace WITH_IPV6 with an IPV6 option.
comms/gnokii: Replace some patches with USES=pathfix.  Also remove -fPIC.
graphics/gimageview: USES=libtool and install desktop file in DESKTOPDIR.
graphics/visionworkbench: Remove FreeBSD 7 support.
multimedia/libmovtar: New LIB_DEPENDS syntax.
multimedia/opencinematools: Use standard do-build.
net/siproxd: USES=libtool:keepla (port actually needs .la files for plugins)
net-mgmt/nagios: Remove -fPIC.
net-mgmt/nagios4: Remove -fPIC.
print/cups-base: Only add -lssp_nonshared on i386 and OSVERSION < 1000036.
security/p11-kit: Replace PTHREAD_LIBS in CONFIGURE_ENV with
ac_cv_func_pthread_mutexattr_init=no in CONFIGURE_ARGS.  This skips a test
in configure that falsely detects pthread_mutexattr_init in our libc.
sysutils/dar: Fix iconv detection.
x11/rxvt-unicode: Remove -lstdc++ and patch configure to remove a FreeBSD
hack and use $CXX as linker as on other platforms.

PR:		190592
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

19:54 amdmi3 

- Convert to USES=gmake,libtool, drop .la files
- Stagify
- Fix DOCS installtion
- Sort plist
- Strip binaries
- Use new LIB_DEPENDS syntax
- Chase libnetdude update

 

22:10 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
net)

 

11:59 mva 

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

 

18:10 ak 

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

 

14:45 wxs 

Assign back to the pool.

Approved by:    maintainer via private mail

11:55 decke 

- Update to 0.5.1

PR:             ports/154719
Submitted by:   Armin Pirkovitsch <armin@frozen-zone.org>
Approved by:    maintainer timeout (3.5 months)

07:34 ade 

Sync to new bsd.autotools.mk

02:01 ade 

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

00:32 amdmi3 

- Switch SourceForge ports to the new File Release System: categories starting
with N

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

13:50 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

21:42 wxs 

Update netdude to 0.4.8a.
Update libnetdude to 0.10a.
Update libpcapnav to 0.8.

Pass maintainership to submitter.

PR:             ports/120116
Submitted by:   Brenton Chang <brenton.chang@gmail.com>
Approved by:    maintainer (implicit), garga (mentor)

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

21:42 itetcu 

Update to 0.4.7

PR:             ports/107646
Submitted by:   Wesley Shields (maintainer)

16:49 miwi 

- Update maintainer addresses

PR:             ports/102230
Submitted by:   Wesley Shields <wxs(at)atarininja.org>
Approved by:    krion (mentor)

09:46 pav 

- Update to 0.4.6
- Transfer maintainership

PR:             ports/96425
Submitted by:   Wesley Shields <wxs@csh.rit.edu>
Approved by:    Yann Berthier <yb@bashibuzuk.net> (maintainer)

08:28 ade 

Bump PORTREVISION on glib12/gtk12 consumer ports to ease the upgrade path.

Discussed with: kris
Approved by:    portmgr (implicit)

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

03:24 edwin 

INSTALL_SHLIBS, INSTALL_SHLIB -> INSTALLS_SHLIB

15:07 vs 

Update maintainer's address

Submitted by: maintainer

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

17:29 ade 

Sync with new bsd.autotools.mk

07:47 krion 

- Update to 0.4.5
- Give maintainership to submitter

PR:             ports/66198
Submitted by:   Yann Berthier <yb@sainte-barbe.org>

19:56 krion 

- Use USE_ICONV knob

Approved by:    portmgr

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

04:36 marcus 

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:   trevor
Tested by:      bento

18:12 trevor 

Now gettext 0.12.1 is gettext-old.

20:25 marcus 

Bump the PORTREVISION for the ports directly affected by the gettext upgrade.

Prodded by:     kris

05:41 marcus 

Chase the libintl.so shared lib version.

22:58 ade 

libtool uber-patch

* kill devel/libtool and move to devel/libtool13, upgrading to 1.3.5
* upgrade repo-copied devel/libtool14 to 1.4.3
* break out libltdl into its own separate port
* move to version-numbered binaries/scripts (ie: there is *no* 'libtool'
  any more -- USE_LIBTOOL and USE_LIBTOOL_VER are your friends)

Approved by:    portmgr (kris) - for the bsd.port.mk hooks
Tested by:      bento 4-exp builds (repeatedly)

07:36 kris 

Remove BROKEN tag; the port was fixed a few days prior to the previous
revision.

Submitted by:   foxfair

11:38 kris 

BROKEN on 5.1: does not compile

07:42 foxfair 

Submitted by:   Patrick MARIE <mycroft@virgaria.org>
Unbreak netdude in -current and bump PORTREVISION.

04:29 foxfair 

PR:             48722
Submitted by:   Clement Laforet <sheepkiller@cultdeadsheep.org>
Update to 0.3.3

19:38 marcus 

Remove USE_GNOMENG.

18:51 knu 

De-pkg-comment.

14:11 ijliao 

add netdude 0.3.1
NETwork DUmp data Displayer and Editor for tcpdump tracefiles