08:12 Yasuhiro Kimura (yasu) 

net/py-mpi4py: Move man page to share/man

Approved by:	portmgr (blanket)

    44ef7b3

09:29 Thierry Thomas (thierry) 

*/*: bump PORTREVISION after OpenMPI upgrade

    9eba616

13:55 Wen Heping (wen) 

net/py-mpi4py: Update to 3.1.5

    37943e2

08:20 Thierry Thomas (thierry) 

net/py-mpi4py: add a slave port depending on MPICH

Sometimes we need mpi4py packaged against mpich, with Fortran enabled.

Do not create a flavor, because there already exist flavors for Python
versions, therefore a slave port seems more appropriate.

Once committed, I shall add a line in Mk/Uses/mpi.mk to grab the right
dependency according to the choice of MPI.

Bump PORTVERSION for people using net/py-mpi4py built from ports with
the non-default MPICH option.

Also change WWW: the project on bitbucket has been archived.

PR:		272949
Approved by:	wen@ (maintainer)

    6d82be9

19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

09:09 Gerald Pfeifer (gerald) 

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

    8d3e020

15:58 Dmitry Marakasov (amdmi3) 

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

    77d6847

21:44 Wen Heping (wen) 

net/py-mpi4py: Update to 3.1.4

    1af37d1

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

23:45 Wen Heping (wen) 

net/py-mpi4py: Update to 3.1.3

    9f44496

13:30 Wen Heping (wen) 

net/py-mpi4py: Update to 3.1.2

    d036e66

06:47 Wen Heping (wen) 

net/py-mpi4py: Update to 3.1.1

Take mainatainership

    41ba77e

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

21:19 thierry 

Set USES=mpi, and replace MPICH2 by MPICH.

 

23:02 antoine 

Drop python 2.7 support from a few ports

With hat:	portmgr

 

13:46 kai 

Relax hardcoded paths to fix build with Python 3.8.7

Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme.  This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".

The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.

Remedy the issue by adding wildcards to these paths.  This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.

[1] https://bugs.python.org/issue42604

PR:		252057
Reported by:	John Kennedy
Reviewed by:	fluffy, koobs
Approved by:	koobs (python)

 

13:34 danilo 

net/py-mpi4py: Move OpenMPI dependecy from net/openmpi3 to net/openmpi (OpenMPI
4)

Reported by:	linimon

 

09:18 danilo 

- Update to 3.0.3
- Move OpenMPI support to net/openmpi3. OpenMPI 1 and 2 are deprecated

 

17:35 pi 

audio/festvox-cmu_us_slt_arctic, games/flightgear-terragear,
graphics/zathura-cb, graphics/zathura-pdf-poppler, graphics/zathura-ps,
math/nfft, net/py-mpi4py, science/aircraft-datcom, x11-themes/gnome-icons-luv:
reset MAINTAINER

Submitted by:	Michael Danilov <mike.d.ft402@gmail.com> (maintainer)

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

13:16 gerald 

Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.

Suggested by:	tijl

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

03:48 yuri 

New port: net/py-mpi4py: Python bindings for MPI

PR:		211768
Submitted by:	Michael Danilov <mike.d.ft402@gmail.com>