non port: print/epson-inkjet-printer-escpr/Makefile |
Number of commits found: 29 |
Friday, 28 Apr 2023
|
16:13 Robert Clausecker (fuz) Author: Tatsuki Makino
print/epson-inkjet-printer-escpr: Update to 1.7.26
New PPD files for the following models have been added.
EP-315 series
PX-S155 series
PX-S505 series
WF-2110 series
XP-65 series
WF-M1130 series
No file changes for autoconf, so fixed to use 2.69.
pkg-descr was re-quoted from the description for other packages, not from the
README.
PR: 270169
798258e |
Monday, 7 Nov 2022
|
18:07 Guangyuan Yang (ygy) Author: Tatsuki Makino
print/epson-inkjet-printer-escpr: Update to 1.7.22
PR: 267513
916c2b6 |
Wednesday, 7 Sep 2022
|
21:10 Stefan Eßer (se)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.
There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.
The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.
Approved by: portmgr (tcberner)
b7f0544 |
Thursday, 11 Aug 2022
|
22:33 Nuno Teixeira (eduardo) Author: Tatsuki Makino
print/epson-inkjet-printer-escpr: Update to 1.7.21
- Supported new models:
ET-2400 series
WF-2930 series
WF-2950 series
WF-2910 series
XP-3200 series
XP-2200 series
XP-4200 series
PR: 265773
747c3df |
Saturday, 5 Feb 2022
|
07:01 Li-Wen Hsu (lwhsu) Author: Tatsuki Makino
print/epson-inkjet-printer-escpr: update to 1.7.18
PR: 261587
d7040fc |
Saturday, 16 Oct 2021
|
21:31 Neel Chauhan (nc) Author: Tatsuki Makino
print/epson-inkjet-printer-escpr: Cleanup port
PR: 259208
0c8fcdc |
Friday, 27 Aug 2021
|
20:06 Tobias C. Berner (tcberner) Author: Tatsuki Makino
print/epson-inkjet-printer-escpr: Update to 1.7.17
New PPD files for the following models have been added:
* ET-1810 series
* ET-2800 series
* ET-2810 series
* ET-2820 series
* ET-2850 series
* L3250 series
* L3260 series
* L4260 series
* L5290 series
* ST-C2100 series
* WF-2820 series
* WF-2840 series
* WF-2870 series
* XP-2150 series
* XP-3150 series
* XP-4150 series
PR: 258074
7c74dd7 |
Tuesday, 15 Jun 2021
|
00:28 Kevin Bowling (kbowling) Author: Tatsuki Makino
print/epson-inkjet-printer-escpr: Update to 1.7.11
New PPD file for ET-4800 series has been added.
PR: 256611
Approved by: maintainer
48231a0 |
Monday, 14 Jun 2021
|
23:21 Kevin Bowling (kbowling) Author: Tatsuki Makino
print/epson-inkjet-printer-escpr: Update to 1.7.10
Drop gmake from USE=. This is because the syntax that requires gmake is
not used.
PR: 256115
Approved by: maintainer
bfb1472 |
Thursday, 8 Apr 2021
|
21:39 Kevin Bowling (kbowling)
print/epson-inkjet-printer-escpr: Update to 1.7.9
PR: 250441
Approved by: Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)
846e451 |
Wednesday, 7 Apr 2021
|
08:09 Mathieu Arnold (mat)
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
cf118cc |
Tuesday, 6 Apr 2021
|
14:31 Mathieu Arnold (mat)
Remove # $FreeBSD$ from Makefiles.
305f148 |
Wednesday, 1 Jan 2020
|
21:49 tcberner
print/epson-inkjet-printer-escpr: Update to 1.7.7
PR: 242535
Submitted by: Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)
|
Friday, 13 Sep 2019
|
10:53 swills
print/epson-inkjet-printer-escpr: Update to 1.7.3
PR: 240550
Submitted by: Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)
|
Saturday, 8 Jun 2019
|
00:28 swills
print/epson-inkjet-printer-escpr: update to 1.6.41
PR: 238328
Submitted by: Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)
|
Saturday, 13 Apr 2019
|
01:04 swills
print/epson-inkjet-printer-escpr: Update to 1.6.38
PR: 236796
Submitted by: Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)
|
Thursday, 27 Dec 2018
|
12:53 swills
print/epson-inkjet-printer-escpr: update to 1.6.33
PR: 234434
Submitted by: Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)
|
Thursday, 4 Oct 2018
|
09:50 arved
Update to 1.6.30
PR: 231898
Submitted by: maintainer
|
Friday, 15 Jun 2018
|
18:52 swills
print/epson-inkjet-printer-escpr: Update to 1.6.21
PR: 229036
Submitted by: Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)
|
Thursday, 22 Mar 2018
|
18:01 swills
print/epson-inkjet-printer-escpr: Update to 1.6.19
PR: 226839
Submitted by: Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)
|
Tuesday, 24 Oct 2017
|
17:03 swills
print/epson-inkjet-printer-escpr: fix MASTER_SITES
PR: 221780
Submitted by: Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)
|
Monday, 23 Oct 2017
|
19:55 swills
print/epson-inkjet-printer-escpr: Update to 1.6.17
PR: 221780
Submitted by: Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)
|
Friday, 7 Oct 2016
|
16:33 pi
print/epson-inkjet-printer-escpr: 1.6.4 -> 1.6.9
- MASTER_SITE changed to LOCAL/pi for now
- corrections of brightness, contrast are halved
- saturation is precisely set
PR: 209221
Submitted by: Tatsuki Makino <tatsuki_makino@hotmail.com> (maintainer)
|
Friday, 1 Apr 2016
|
14:16 mat
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.
With hat: portmgr
Sponsored by: Absolight
|
Friday, 11 Mar 2016
|
11:53 tijl
Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3. Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.
Long description:
First some background. When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain. Costs used to be configured in such a way that files were
first converted to PostScript. This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers. Nowadays most filters
have been moved from cups to cups-filters and they have been configured to
use PDF as an intermediate format instead of PostScript.
Merging of cups-base, cups-client and cups-image into print/cups:
- cups-image provides a library to work with the cups raster format. It is
only used to implement filters and printer drivers and these only exist
in the context of a cups server so there's no need to separate this from
cups-base.
- cups-client provides a library that allows applications to print via cups.
It is possible to use the library to access a remote cups server without
running a local cups server, but such a setup is discouraged and the
configuration file to set this up has been marked deprecated. It is
better to run a local cups server and let that talk to the remote cups
server because then you have the benefits of local job queuing in case the
remote server is down or busy. Given this and the fact that without
filters cups-base is now smaller than it used to be it makes sense to
merge the ports. The patch also adds options IPPTOOL, DOCS and NLS which
when disabled make the new cups package smaller than the current
cups-client package. Merging the ports also prevents problems with
options like ZEROCONF being configured differently in both ports.
- print/cups was a metaport that depended on cups-base and some filters.
There isn't really a need for such a metaport so cups-base can be renamed
to cups. The filters can be depended on by printer drivers such as hplip
if they need them.
Additional changes to the new print/cups:
- Clean up the patches. They seem to have been regenerated with post-patch
changes included.
- Add a patch to prevent intermediate conversion to PDF when a PostScript
file is sent to a PostScript printer when cups-filters is installed.
- Fix the PAM configuration file.
- Add a patch to let the server search /usr/local/share/ppd like on Linux so
other ports don't have to add links to it.
- Remove ulpt(4) helper scripts. The port uses libusb with ugen(4).
- Remove support for mDNSResponder. cups-filters only supports Avahi.
- Combine ICONS and XDG_OPEN options into an X11 option to support WITHOUT_X11.
- Optionally depend on colord for ICC profile support.
- Various smaller changes.
Changes to print/cups-filters:
- Let the cups_browsed rc.d script depend on cupsd and avahi_daemon instead
of LOGIN.
- Development of foomatic-filters has been moved to cups-filters so let this
port install foomatic related files and add foomatic-filters to CONFLICTS.
- Fix location of liblouis tables.
- Add patch to fix ICC support.
Changes to print/cups-pstoraster:
This port is essentially an old version of Ghostscript plus a cups filter.
It's no longer developed. This commit removes it and changes existing
dependencies to print/cups-filters which depends on print/ghostscript* and
includes a gstoraster filter that can handle both PostScript and PDF.
Changes to print/foomatic-db*:
Remove old MASTER_SITES and dependencies and eliminate PKGNAMEPREFIX.
Changes to print/foomatic-filters:
Install beh backend with its original name again and add cups-filters to
CONFLICTS.
Changes to print/hplip:
- Stop installing hpijs/foomatic-rip support. This is no longer supported
upstream.
- Stop installing hpcups PPDs. These are now automatically generated. The
bundled PPDs are generated for an older version of cups.
- Rename the QT option to X11 to support WITHOUT_X11.
- Simplify the patches now that ports are installed in a staging area.
- Add a patch to set SO_REUSEPORT (next to SO_REUSEADDR) on the mDNS socket
like avahi-daemon does. This fixes Zeroconf support for HP network
printers.
PR: 207746
Exp-run by: antoine
Approved by: portmgr (antoine)
|
Tuesday, 23 Feb 2016
|
02:18 hrs
Update to 1.6.4.
Submitted by: Tatsuki Makino (maintainer)
PR: 206416
|
Thursday, 12 Nov 2015
|
03:29 hrs
Update to 1.6.1 and add patches to fix issues reported
in PR 203637.
Submitted by: Tatsuki Makino (maintainer)
PR: 204250
|
Thursday, 22 Oct 2015
|
03:47 hrs
Update to 1.6.0.
Submitted by: Tatsuki Makino (maintainer)
PR: 203637
|
Wednesday, 23 Sep 2015
|
16:31 hrs
Add print/epson-inkjet-printer-escpr, CUPS driver for EPSON inkjet
printers with ESC/P-R control language under GPL. The port name is
the same one as Linux's while it is a bit lengthy.
Submitted by: tatsuki_makino@hotmail.com
PR: 203258
|
Number of commits found: 29 |