21:39 Muhammad Moinur Rahman (bofh) 

print/foomatic-db-engine: Moved man to share/man

    19c2548

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:22 Tobias C. Berner (tcberner) 

print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>
  *  Anton Berezin <tobez@tobez.org>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Bruce M. Simpson <bms@FreeBSD.org>
  *  CHOI Junho <cjh@FreeBSD.org>
  *  Chuck Robey <chuckr@FreeBSD.org>
  *  D'Arcy Cain <darcy@druid.net>
  *  David O'Brien (obrien@NUXI.com)
  *  David O'Brien <obrien@FreeBSD.org>
  *  David O'Brien <obrien@cs.ucdavis.edu>
  *  Dima Dorfman <dima@unixfreak.org>
  *  Dmitry Kazarov <d.y.kazarov@mail.ru>
  *  Dmitry Sivachenko <dima@Chg.RU>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Fabiano Sidler <fabianosidler@swissonline.ch>
  *  Fernan Aguero <fernan.aguero@gmail.com>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Giuseppe Pilichi aka Jacula Modyun <jacula@gmail.com>
  *  Golyashov Sergey <svvord@soft-wizard.ru>
  *  Gvozdikov Veniamin <g.veniamin@googlemail.com>
  *  Hideaki Ohmon <ohmon@tom.sfc.keio.ac.jp>
  *  Igor Pokrovsky <tiamat@comset.net>
  *  James Bailie <jimmy@mammothcheese.ca>
  *  Jean-Marc Zucconi <jmz@FreeBSD.org> and David O'Brien <obrien@FreeBSD.org>
  *  Jean-Sebastien Roy <js@jeannot.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Joel Sutton <jsutton@bbcon.com.au>
  *  Joerg Wunsch <joerg@FreeBSD.org>
  *  Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
  *  Jose Jachuf <jjachuf@gmail.com>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Juergen Lock <nox@jelal.kn-bremen.de>
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  KANOU Hiroki <kanou@khdd.net>
  *  KATO Tsuguru <tkato@prontomail.com>
  *  Kapil Chowksey
  *  Kentaro Inagaki <JBD01226@niftyserve.ne.jp>
  *  Kimura Fuyuki <fuyuki@hadaly.org>
  *  Klemm <andreas@klemm.gtn.com>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kozlov Sergey <kozlov.sergey.404@gmail.com>
  *  Lars Koeller
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Mark Reidel <ports@mark.reidel.info>
  *  Martin Dieringer <martin.dieringer@gmx.de>
  *  Martin Kammerhofer
  *  Martin Klaffenboeck <martin.klaffenboeck@gmx.at>
  *  Martin Ranne <gasp@ridcully.dnsalias.org>
  *  Matthew Hunt <mph@pobox.com>
  *  Maxim Loginov <Zeliboba@mail.ru>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Moll <kvedulv at kvedulv.de>
  *  Michael Nottebrock <lofi@FreeBSD.org>
  *  Mike Meyer <mwm@mired.org>
  *  Mikhail Teterin
  *  Mita Yoshio <mita@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Oliver Braun <obraun@informatik.unibw-muenchen.de>
  *  Oliver Breuninger <ob@seicom.NET>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Patrick Dung (patrick_dkt@yahoo.com.hk)
  *  Patrick Powell <papowell@astart.com>
  *  Pedro Giffuni
  *  Philip M. Gollucci <pgpollucci@p6m7g8.com>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Robert Withrow <witr@rwwa.com>
  *  Romain Tartiere <romain@FreeBSD.org>
  *  Satoshi Asami <asami@FreeBSD.org>
  *  Satoshi TAOKA <taoka@FreeBSD.org>
  *  Satoshi Taoka <taoka@FreeBSD.org>
  *  Shen Chuan-Hsing <statue@freebsd.sinica.edu.tw>
  *  Simon 'corecode' Schubert <corecode@corecode.ath.cx>
  *  Simun Mikecin <numisemis@yahoo.com>
  *  Stefan Esser <se@FreeBSD.org>
  *  Stefan Hagen <ports@textmail.me>
  *  Stephen Fisher
  *  Steve Wills <swills@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Tim McCormick <tim@pcbsd.org>
  *  Tomokatsu SAITO <saito@a2z.co.jp>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Yuichiro AIZAWA <yaizawa@mdbl.sfc.keio.ac.jp>
  *  amistry@am-productions.biz
  *  andrew@scoop.co.nz
  *  arved
  *  brett@peloton.physics.montana.edu
  *  chuckr@FreeBSD.org
  *  cjm2
  *  dbader@eece.unm.edu
  *  dgilbert@velocet.ca
  *  e-masson@kisoft-services.com
  *  eserte@cs.tu-berlin.de
  *  gahr
  *  giffunip
  *  hrs
  *  ijliao
  *  jmz
  *  joerg
  *  johans
  *  jseger@FreeBSD.org
  *  kline
  *  ljo
  *  lofi@FreeBSD.org
  *  martin.dieringer@gmx.de
  *  mwest@uct.ac.za
  *  oly@world.std.com
  *  patrick, trevor
  *  smace@FreeBSD.org
  *  spcoltri@unm.edu
  *  tg@FreeBSD.org
  *  tobez
  *  wenheping@gmail.com

With hat:	portmgr

    51879c9

19:11 Charlie Li (vishwin) 

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

    d63665f

08:27 Matthias Fechner (mfechner) 

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

    247c7db

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

13:22 tobik 

print, science: Add missing USES=gnome

 

12:40 bofh 

print/foomatic-db-engine: Update version 4.0.12=>4.0.13

- Pet portlint

 

14:16 mat 

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

 

11:53 tijl 

Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters
have been moved from cups to cups-filters and they have been configured to
use PDF as an intermediate format instead of PostScript.

Merging of cups-base, cups-client and cups-image into print/cups:
- cups-image provides a library to work with the cups raster format.  It is
  only used to implement filters and printer drivers and these only exist
  in the context of a cups server so there's no need to separate this from
  cups-base.
- cups-client provides a library that allows applications to print via cups.
  It is possible to use the library to access a remote cups server without
  running a local cups server, but such a setup is discouraged and the
  configuration file to set this up has been marked deprecated.  It is
  better to run a local cups server and let that talk to the remote cups
  server because then you have the benefits of local job queuing in case the
  remote server is down or busy.  Given this and the fact that without
  filters cups-base is now smaller than it used to be it makes sense to
  merge the ports.  The patch also adds options IPPTOOL, DOCS and NLS which
  when disabled make the new cups package smaller than the current
  cups-client package.  Merging the ports also prevents problems with
  options like ZEROCONF being configured differently in both ports.
- print/cups was a metaport that depended on cups-base and some filters.
  There isn't really a need for such a metaport so cups-base can be renamed
  to cups.  The filters can be depended on by printer drivers such as hplip
  if they need them.

Additional changes to the new print/cups:
- Clean up the patches.  They seem to have been regenerated with post-patch
  changes included.
- Add a patch to prevent intermediate conversion to PDF when a PostScript
  file is sent to a PostScript printer when cups-filters is installed.
- Fix the PAM configuration file.
- Add a patch to let the server search /usr/local/share/ppd like on Linux so
  other ports don't have to add links to it.
- Remove ulpt(4) helper scripts.  The port uses libusb with ugen(4).
- Remove support for mDNSResponder.  cups-filters only supports Avahi.
- Combine ICONS and XDG_OPEN options into an X11 option to support WITHOUT_X11.
- Optionally depend on colord for ICC profile support.
- Various smaller changes.

Changes to print/cups-filters:
- Let the cups_browsed rc.d script depend on cupsd and avahi_daemon instead
  of LOGIN.
- Development of foomatic-filters has been moved to cups-filters so let this
  port install foomatic related files and add foomatic-filters to CONFLICTS.
- Fix location of liblouis tables.
- Add patch to fix ICC support.

Changes to print/cups-pstoraster:
This port is essentially an old version of Ghostscript plus a cups filter.
It's no longer developed.  This commit removes it and changes existing
dependencies to print/cups-filters which depends on print/ghostscript* and
includes a gstoraster filter that can handle both PostScript and PDF.

Changes to print/foomatic-db*:
Remove old MASTER_SITES and dependencies and eliminate PKGNAMEPREFIX.

Changes to print/foomatic-filters:
Install beh backend with its original name again and add cups-filters to
CONFLICTS.

Changes to print/hplip:
- Stop installing hpijs/foomatic-rip support.  This is no longer supported
  upstream.
- Stop installing hpcups PPDs.  These are now automatically generated.  The
  bundled PPDs are generated for an older version of cups.
- Rename the QT option to X11 to support WITHOUT_X11.
- Simplify the patches now that ports are installed in a staging area.
- Add a patch to set SO_REUSEPORT (next to SO_REUSEADDR) on the mDNS socket
  like avahi-daemon does.  This fixes Zeroconf support for HP network
  printers.

PR:		207746
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

10:05 marino 

print/foomatic-db-engine is not jobs safe

This port has failed on me with multijob several times.
The last time, the lib/perl5/site_perl/Foomatic/Defaults.pm file
was not installed, so set MAKE_JOBS_UNSAFE.

 

18:34 mat 

Cleanup DIST* variables.

When appropriate:
- Try to use DISTVERSION{SUF,PRE}FIX
- Replace PORTNAME-PORTVERSION by DISTNAME
- Convert MASTER_SITES to use macros
- Other light cleanup

With hat:	portmgr
Sponsored by:	Absolight

 

12:07 bofh 

print/foomatic-db-engine: Update version 4.0.11=>4.0.12

- Add LICENSE GPLv2
- Remove MAKE_JOBS_UNSAFE as it builds fine without it
- Take maintainrship

Approved by:	bapt marino (implicit)

 

13:08 mat 

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

 

08:14 marino 

print/foomatic-db-engine: Not jobs safe

Some times man page isn't ready before installing starts.

 

18:28 zeising 

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

 

10:10 bsam 

Update to version 4.0.11.

 

21:17 bsam 

Release cups-* nad foomatic-* ports. Currently I have no enough
spare time for those ports.

I've submitted ports/186824 to update cups-* ports to version 1.7.0.

 

19:38 bsam 

. take maintainership print/foomatic-db, print/foomatic-db-engine,
print/foomatic-filters);
. update to version 20131207;
. change MASTER_SITES;
. use new LIB_DEPENDS syntax;
. incorporate USES=gmake;
. allow staging.

PR:		ports/184690
Submitted by:	bsam (me)
Reviewed by:	acm (former maintainer, maintainer timeout)

 

22:44 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

 

13:07 az 

- convert to the new perl5 framework

Approved by:	portmgr (bapt@, blanket)

 

06:39 acm 

- Update to 4.0.7

22:00 acm 

- Update to 4.0.1
- Bump PORTEPOCH

20:50 acm 

- Update to 20070124

15:54 acm 

- Update to 20061214
- Add miwi's mirror to MASTER_SITES (miwi thanks)

16:53 acm 

- Update to 20061031

15:45 acm 

- Update to 20060922

15:49 acm 

- Update to 20060822

Approved by:    garga (mentor)

02:05 acm 

- Update to 20060723
- Change master site local to my account

Approved by:    garga (mentor)

02:45 acm 

Change maintainer address to my @FreeBSD.org email

Approved by:    garga (mentor)

21:14 pav 

- Update to 20060618

PR:             ports/99129
Submitted by:   Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe> (maintainer)

09:45 pav 

- Update to 20060531
- Host tarball locally
- Take maintainership

PR:             ports/98203
Submitted by:   Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>

12:16 krion 

Update to version 3.0.2

PR:             ports/72325
Submitted by:   Ports Fury

17:14 kris 

BROKEN: Configure fails

Approved by:    portmgr (self)

22:36 ade 

Move devel/autoconf->devel/autoconf253 and devel/automake->devel/automake15
All autotools ports are now truly versioned and do not conflict with each
other.

This marks the end of "Phase 1" of the autotools updates.

17:29 ade 

Sync with new bsd.autotools.mk

22:41 roam 

Update ftp/curl to 7.12.0 and bump the shared library version in all
dependent ports.

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

19:54 marcus 

Fix make patch after gettext PORTREVISION bump by using DISTNAME instead of
PKGNAME for the tarball and WRKSRC.

PR:             63148
Submitted by:   Taoka Fumiyoshi <fmysh@iijmio-mail.jp>

12:21 kris 

BROKEN: Fails to patch

05:10 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

12:29 pav 

- Fix build, fix plist, bump version

Reported by:    bento via kris

21:34 pav 

- Update to today (20031120) CVS and fix building

PR:             ports/58423
Submitted by:   Martin Ranne <gasp@ridcully.dnsalias.org>
Approved by:    adamw (mentor)

12:29 trevor 

USE_REINPLACE need be defined only when REINPLACE_CMD is used.

04:56 kris 

Reset bouncing maintainer address

03:56 kris 

Mark BROKEN (see bento logs).  These ports are scheduled for removal
after Feb 2 2004 if they are still broken at that time and no fixes
have been submitted by PR.

02:46 kris 

BROKEN: Does not compile

04:19 edwin 

Add USE_AUTOMAKE to the ports Makefile

Noticed by: bento

12:52 edwin 

New port: print/foomatic-db-engine

        db engine for foomatic (and gimp-print) printer drivers

PR:             ports/48812
Submitted by:   Martin Ranne <gasp@ridcully.dnsalias.org>