notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
Ukraine
NOTE: There is a known problem on production with searching pkg-plist - it returns no results. This problem is not present on stage.freshports.org
non port: print/magicfilter/Makefile
SVNWeb

Number of commits found: 32

Wed, 7 Sep 2022
[ 21:10 Stefan E├čer (se) search for other commits by this committer ]    commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  commit hash:b7f05445c00f2625aa19b4154ebcbce5ed2daa52  b7f0544  (Only the first 10 of 27931 ports in this commit are shown above. View all ports for this commit)
Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Wed, 20 Jul 2022
[ 14:22 Tobias C. Berner (tcberner) search for other commits by this committer ]    commit hash:51879c91f87889e30c8cc97affa08f16b6ac8527  commit hash:51879c91f87889e30c8cc97affa08f16b6ac8527  commit hash:51879c91f87889e30c8cc97affa08f16b6ac8527  51879c9  (Only the first 10 of 197 ports in this commit are shown above. View all ports for this commit)
print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Tue, 6 Apr 2021
[ 14:31 Mathieu Arnold (mat) search for other commits by this committer ]    commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  commit hash:305f148f482daf30dcf728039d03d019f88344eb  305f148  (Only the first 10 of 29333 ports in this commit are shown above. View all ports for this commit)
Remove # $FreeBSD$ from Makefiles.
Wed, 22 Aug 2018
[ 07:25 tobik search for other commits by this committer ] Original commit   Revision:477773
print/magicfilter: Canonicalize RUN_DEPENDS

PR:		218268
Reported by:	mat
Tue, 21 Aug 2018
[ 16:17 tobik search for other commits by this committer ] Original commit   Revision:477722
print/magicfilter: Prevent ccache from being accidentally added as a run
dependency

PR:		218268
Submitted by:	Andreas Hollmann <andreas.hollmann@gmail.com>
Fri, 1 Apr 2016
[ 14:16 mat search for other commits by this committer ] Original commit   Revision:412348 (Only the first 10 of 2612 ports in this commit are shown above. View all ports for this commit)
Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight
Thu, 24 Mar 2016
[ 15:47 tijl search for other commits by this committer ] Original commit   Revision:411798 (Only the first 10 of 95 ports in this commit are shown above. View all ports for this commit)
Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)
Sat, 22 Aug 2015
[ 17:48 hrs search for other commits by this committer ] Original commit   Revision:395047 (Only the first 10 of 354 ports in this commit are shown above. View all ports for this commit)
- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Thu, 16 Jul 2015
[ 20:53 kwm search for other commits by this committer ] Original commit   Revision:392322 (Only the first 10 of 89 ports in this commit are shown above. View all ports for this commit)
Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938
Mon, 7 Jul 2014
[ 06:00 vanilla search for other commits by this committer ] Original commit   Revision:361025
Stagify.
Fri, 20 Sep 2013
[ 22:44 bapt search for other commits by this committer ] Original commit   Revision:327765 (Only the first 10 of 325 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
print)
Fri, 1 Jun 2012
[ 05:26 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4371 ports in this commit are shown above. View all ports for this commit)
- update png to 1.5.10
Sun, 28 Mar 2010
[ 06:47 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4470 ports in this commit are shown above. View all ports for this commit)
- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi
Fri, 5 Feb 2010
[ 11:46 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 4271 ports in this commit are shown above. View all ports for this commit)
- update to jpeg-8
Sat, 2 Jan 2010
[ 18:14 linimon search for other commits by this committer ] Original commit  (Only the first 10 of 69 ports in this commit are shown above. View all ports for this commit)
Reset cjh due to inactivity.  We hope to see him back again soon.

Hat:            portmgr
Fri, 31 Jul 2009
[ 13:57 dinoex search for other commits by this committer ] Original commit  (Only the first 10 of 3009 ports in this commit are shown above. View all ports for this commit)
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin
Thu, 21 Aug 2008
[ 06:18 rafan search for other commits by this committer ] Original commit  (Only the first 10 of 1030 ports in this commit are shown above. View all ports for this commit)
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Mon, 4 Feb 2008
[ 11:39 cjh search for other commits by this committer ] Original commit 
depends on sysutils/file only if it's installed.

PR:             ports/120033
Submitted by:   rafan
Mon, 24 Sep 2007
[ 08:39 rafan search for other commits by this committer ] Original commit 
Remove print/ghostscript-afpl as it has been replaced by print/ghostscript-gpl
since version 8.57. The leading ghostscript is the -gpl one.

Approved by:    portmgr (pav)
Sat, 19 May 2007
[ 20:32 flz search for other commits by this committer ] Original commit  (Only the first 10 of 7868 ports in this commit are shown above. View all ports for this commit)
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
Mon, 8 May 2006
[ 10:38 cjh search for other commits by this committer ] Original commit 
To always find libmagic.so in sysutils/file in [4567].x.

PR:             ports/96782
Submitted by:   Rong-En Fan <rafan@infor.org>
Tue, 2 May 2006
[ 01:50 cjh search for other commits by this committer ] Original commit 
Update to 2.3.h.
Add RUN_DEPENDS not to confuse with built-in file and sysutils/file.

PR:             ports/96495
Submitted by:   Rong-En Fan <rafan@infor.org>
Fri, 20 Jan 2006
[ 00:14 kris search for other commits by this committer ] Original commit 
BROKEN on 7.0: Does not build
Sat, 4 Dec 2004
[ 17:06 cjh search for other commits by this committer ] Original commit 
Update to 2.3.b.
Wed, 4 Feb 2004
[ 05:10 marcus search for other commits by this committer ] Original commit  (Only the first 10 of 1422 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)
Tue, 20 Jan 2004
[ 16:30 marcus search for other commits by this committer ] Original commit  (Only the first 10 of 35 ports in this commit are shown above. View all ports for this commit)
Use the new ghostscript options.

Submitted by:   linimon
Sat, 25 Oct 2003
[ 00:41 cjh search for other commits by this committer ] Original commit 
Unbroke in -current.

Submitted by:   kris
Wed, 15 Oct 2003
[ 22:07 kris search for other commits by this committer ] Original commit 
BROKEN on 5.x: does not compile
Sun, 31 Aug 2003
[ 01:10 edwin search for other commits by this committer ] Original commit 
[PATCH] print/magicfilter: enable choose of ghostscript interpreter

        This patch allows the admin of the machine to choose either
        print/ghostscript-gnu or print/ghostscript-afp1

PR:             ports/54944
Submitted by:   Jens Rehsack <rehsack@liwing.de>
Fri, 7 Mar 2003
[ 06:09 ade search for other commits by this committer ] Original commit  (Only the first 10 of 98 ports in this commit are shown above. View all ports for this commit)
Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.
Tue, 11 Sep 2001
[ 21:52 knu search for other commits by this committer ] Original commit 
Replace the ghostscript55 dependencies with ghostscript-gnu.    
Sat, 1 Jul 2000
[ 18:07 cjh search for other commits by this committer ] Original commit 
Remove RUN_DEPENDS. It gives you the choice of runtime gs version,   just like
many other gs-related ports does.    

Number of commits found: 32