19:42 Christian Weisgerber (naddy) 

print/openprinting: Move man pages to share/man

Approved by:	portmgr (blanket)

    ef65d39

22:11 Rodrigo Osorio (rodrigo) 

*/*: Update WWW to use HTTPS for sourceforge.net projects

Homepage link is permanent redirected to its HTTPS counterpart

    05f0f44

00:48 Muhammad Moinur Rahman (bofh) 

*/*: Fix build with llvm16 on 13.2-STABLE

As like as HEAD(14.0-RELEASE) llvm16 was merged in base for 13.2-STABLE
with the OSVERSION 1302507.

- Utilize USE_CXXSTD=c++14 or similar solution where applicable
- Update conditionals to addtionally check for OSVERSION greater than
  1302507 and less than 1400000

Approved by:	portmgr (blanket)
Sponsored by:	The FreeBSD Foundation

    95274bf

08:36 Muhammad Moinur Rahman (bofh) 

print/openprinting: Fix build with llvm16

- Utilize USES=localbase
- Pet portclippy

Sponsored by:	The FreeBSD Foundation

    2bb0c72

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:22 Tobias C. Berner (tcberner) 

print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>
  *  Anton Berezin <tobez@tobez.org>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Bruce M. Simpson <bms@FreeBSD.org>
  *  CHOI Junho <cjh@FreeBSD.org>
  *  Chuck Robey <chuckr@FreeBSD.org>
  *  D'Arcy Cain <darcy@druid.net>
  *  David O'Brien (obrien@NUXI.com)
  *  David O'Brien <obrien@FreeBSD.org>
  *  David O'Brien <obrien@cs.ucdavis.edu>
  *  Dima Dorfman <dima@unixfreak.org>
  *  Dmitry Kazarov <d.y.kazarov@mail.ru>
  *  Dmitry Sivachenko <dima@Chg.RU>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Fabiano Sidler <fabianosidler@swissonline.ch>
  *  Fernan Aguero <fernan.aguero@gmail.com>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Giuseppe Pilichi aka Jacula Modyun <jacula@gmail.com>
  *  Golyashov Sergey <svvord@soft-wizard.ru>
  *  Gvozdikov Veniamin <g.veniamin@googlemail.com>
  *  Hideaki Ohmon <ohmon@tom.sfc.keio.ac.jp>
  *  Igor Pokrovsky <tiamat@comset.net>
  *  James Bailie <jimmy@mammothcheese.ca>
  *  Jean-Marc Zucconi <jmz@FreeBSD.org> and David O'Brien <obrien@FreeBSD.org>
  *  Jean-Sebastien Roy <js@jeannot.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Joel Sutton <jsutton@bbcon.com.au>
  *  Joerg Wunsch <joerg@FreeBSD.org>
  *  Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
  *  Jose Jachuf <jjachuf@gmail.com>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Juergen Lock <nox@jelal.kn-bremen.de>
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  KANOU Hiroki <kanou@khdd.net>
  *  KATO Tsuguru <tkato@prontomail.com>
  *  Kapil Chowksey
  *  Kentaro Inagaki <JBD01226@niftyserve.ne.jp>
  *  Kimura Fuyuki <fuyuki@hadaly.org>
  *  Klemm <andreas@klemm.gtn.com>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kozlov Sergey <kozlov.sergey.404@gmail.com>
  *  Lars Koeller
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Mark Reidel <ports@mark.reidel.info>
  *  Martin Dieringer <martin.dieringer@gmx.de>
  *  Martin Kammerhofer
  *  Martin Klaffenboeck <martin.klaffenboeck@gmx.at>
  *  Martin Ranne <gasp@ridcully.dnsalias.org>
  *  Matthew Hunt <mph@pobox.com>
  *  Maxim Loginov <Zeliboba@mail.ru>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Moll <kvedulv at kvedulv.de>
  *  Michael Nottebrock <lofi@FreeBSD.org>
  *  Mike Meyer <mwm@mired.org>
  *  Mikhail Teterin
  *  Mita Yoshio <mita@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Oliver Braun <obraun@informatik.unibw-muenchen.de>
  *  Oliver Breuninger <ob@seicom.NET>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Patrick Dung (patrick_dkt@yahoo.com.hk)
  *  Patrick Powell <papowell@astart.com>
  *  Pedro Giffuni
  *  Philip M. Gollucci <pgpollucci@p6m7g8.com>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Robert Withrow <witr@rwwa.com>
  *  Romain Tartiere <romain@FreeBSD.org>
  *  Satoshi Asami <asami@FreeBSD.org>
  *  Satoshi TAOKA <taoka@FreeBSD.org>
  *  Satoshi Taoka <taoka@FreeBSD.org>
  *  Shen Chuan-Hsing <statue@freebsd.sinica.edu.tw>
  *  Simon 'corecode' Schubert <corecode@corecode.ath.cx>
  *  Simun Mikecin <numisemis@yahoo.com>
  *  Stefan Esser <se@FreeBSD.org>
  *  Stefan Hagen <ports@textmail.me>
  *  Stephen Fisher
  *  Steve Wills <swills@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Tim McCormick <tim@pcbsd.org>
  *  Tomokatsu SAITO <saito@a2z.co.jp>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Yuichiro AIZAWA <yaizawa@mdbl.sfc.keio.ac.jp>
  *  amistry@am-productions.biz
  *  andrew@scoop.co.nz
  *  arved
  *  brett@peloton.physics.montana.edu
  *  chuckr@FreeBSD.org
  *  cjm2
  *  dbader@eece.unm.edu
  *  dgilbert@velocet.ca
  *  e-masson@kisoft-services.com
  *  eserte@cs.tu-berlin.de
  *  gahr
  *  giffunip
  *  hrs
  *  ijliao
  *  jmz
  *  joerg
  *  johans
  *  jseger@FreeBSD.org
  *  kline
  *  ljo
  *  lofi@FreeBSD.org
  *  martin.dieringer@gmx.de
  *  mwest@uct.ac.za
  *  oly@world.std.com
  *  patrick, trevor
  *  smace@FreeBSD.org
  *  spcoltri@unm.edu
  *  tg@FreeBSD.org
  *  tobez
  *  wenheping@gmail.com

With hat:	portmgr

    51879c9

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

08:41 ak 

- Remove commented out and obsolete USE_APACHE and USE_AUTOTOOLS, fix typo
USE_PHP_= -> USE_PHP+=

Approved by:	portmgr blanket

 

02:43 emaste 

print/openprinting: fix build when lld is the system linker

This port passes an invalid argument -Mmapfile to the linker.  Per GNU
BFD ld's manpage, link map options are -M or --print-map to print a link
map to stdout, or -Map mapfile to print a link map to mapfile.

It appears that ld.bfd accepts -Mmapfile as a synonym for -M due to some
quirk of its parser; lld simply fails with an unknown argument error.

This port's embedded copy of libtool was also too old to know that it
should pass the -fuse-ld flag from LDFLAGS through to the linker, and
also too old to match the sed expression in Mk/Uses/libtool.mk that
patches in knowledge of -fuse-ld.  Thus, patch ltmain.sh to add
-fuse-ld=bfd as a passthrough flag.

I do not know why libtool's authors believed that silently dropping
flags from a user's provided LDFLAGS was (is) a sensible thing to do.

PR:		221809
Approved by:	ler
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D14968

 

12:51 mat 

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

 

14:16 mat 

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

 

11:53 tijl 

Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters
have been moved from cups to cups-filters and they have been configured to
use PDF as an intermediate format instead of PostScript.

Merging of cups-base, cups-client and cups-image into print/cups:
- cups-image provides a library to work with the cups raster format.  It is
  only used to implement filters and printer drivers and these only exist
  in the context of a cups server so there's no need to separate this from
  cups-base.
- cups-client provides a library that allows applications to print via cups.
  It is possible to use the library to access a remote cups server without
  running a local cups server, but such a setup is discouraged and the
  configuration file to set this up has been marked deprecated.  It is
  better to run a local cups server and let that talk to the remote cups
  server because then you have the benefits of local job queuing in case the
  remote server is down or busy.  Given this and the fact that without
  filters cups-base is now smaller than it used to be it makes sense to
  merge the ports.  The patch also adds options IPPTOOL, DOCS and NLS which
  when disabled make the new cups package smaller than the current
  cups-client package.  Merging the ports also prevents problems with
  options like ZEROCONF being configured differently in both ports.
- print/cups was a metaport that depended on cups-base and some filters.
  There isn't really a need for such a metaport so cups-base can be renamed
  to cups.  The filters can be depended on by printer drivers such as hplip
  if they need them.

Additional changes to the new print/cups:
- Clean up the patches.  They seem to have been regenerated with post-patch
  changes included.
- Add a patch to prevent intermediate conversion to PDF when a PostScript
  file is sent to a PostScript printer when cups-filters is installed.
- Fix the PAM configuration file.
- Add a patch to let the server search /usr/local/share/ppd like on Linux so
  other ports don't have to add links to it.
- Remove ulpt(4) helper scripts.  The port uses libusb with ugen(4).
- Remove support for mDNSResponder.  cups-filters only supports Avahi.
- Combine ICONS and XDG_OPEN options into an X11 option to support WITHOUT_X11.
- Optionally depend on colord for ICC profile support.
- Various smaller changes.

Changes to print/cups-filters:
- Let the cups_browsed rc.d script depend on cupsd and avahi_daemon instead
  of LOGIN.
- Development of foomatic-filters has been moved to cups-filters so let this
  port install foomatic related files and add foomatic-filters to CONFLICTS.
- Fix location of liblouis tables.
- Add patch to fix ICC support.

Changes to print/cups-pstoraster:
This port is essentially an old version of Ghostscript plus a cups filter.
It's no longer developed.  This commit removes it and changes existing
dependencies to print/cups-filters which depends on print/ghostscript* and
includes a gstoraster filter that can handle both PostScript and PDF.

Changes to print/foomatic-db*:
Remove old MASTER_SITES and dependencies and eliminate PKGNAMEPREFIX.

Changes to print/foomatic-filters:
Install beh backend with its original name again and add cups-filters to
CONFLICTS.

Changes to print/hplip:
- Stop installing hpijs/foomatic-rip support.  This is no longer supported
  upstream.
- Stop installing hpcups PPDs.  These are now automatically generated.  The
  bundled PPDs are generated for an older version of cups.
- Rename the QT option to X11 to support WITHOUT_X11.
- Simplify the patches now that ports are installed in a staging area.
- Add a patch to set SO_REUSEPORT (next to SO_REUSEADDR) on the mDNS socket
  like avahi-daemon does.  This fixes Zeroconf support for HP network
  printers.

PR:		207746
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

18:00 amdmi3 

- Unstage stuff not included into plist to fix stage-qa, assuming it's not
needed in this port
- Sort plist

 

10:15 mat 

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

 

19:33 bapt 

cleanup plist

 

18:18 tijl 

- USES=libtool tar:bzip2
- Add INSTALL_TARGET=install-strip
- Avoid USE_AUTOTOOLS

 

14:50 tijl 

Support LIBS like LDFLAGS.

- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS.  Also remove references to
  PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
  required additional patches.

Somewhat simplified a linker command line looks like:

${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}

where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us.  If possible -L and -l flags need to be
added to LIBS to make sure they appear after any -L and -l flags set by
upstream.  Many ports currently add -L${LOCALBASE}/lib to LDFLAGS but this
may appear too early on the command line causing installed libraries to
be linked in instead of freshly built ones.

Additional changes:
benchmarks/netio: Replace WITH_IPV6 with an IPV6 option.
comms/gnokii: Replace some patches with USES=pathfix.  Also remove -fPIC.
graphics/gimageview: USES=libtool and install desktop file in DESKTOPDIR.
graphics/visionworkbench: Remove FreeBSD 7 support.
multimedia/libmovtar: New LIB_DEPENDS syntax.
multimedia/opencinematools: Use standard do-build.
net/siproxd: USES=libtool:keepla (port actually needs .la files for plugins)
net-mgmt/nagios: Remove -fPIC.
net-mgmt/nagios4: Remove -fPIC.
print/cups-base: Only add -lssp_nonshared on i386 and OSVERSION < 1000036.
security/p11-kit: Replace PTHREAD_LIBS in CONFIGURE_ENV with
ac_cv_func_pthread_mutexattr_init=no in CONFIGURE_ARGS.  This skips a test
in configure that falsely detects pthread_mutexattr_init in our libc.
sysutils/dar: Fix iconv detection.
x11/rxvt-unicode: Remove -lstdc++ and patch configure to remove a FreeBSD
hack and use $CXX as linker as on other platforms.

PR:		190592
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

13:39 miwi 

- Stage support

 

22:44 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

 

18:25 mva 

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig and
  USE_GETTEXT=yes to USES=gettext while here

 

18:10 ak 

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

 

14:29 ohauer 

- remove www/apache20 and devel/apr0
- s/USE_APACHE= 20+/USE_APACHE= 22+/
- unify s/YES/yes/
- cleanup APACHE_VERSION <= 22 usage
- add entry to MOVED

with hat apache@

19:00 ohauer 

- USE_APACHE=  /1.3/13/  /2.0/20/ /2.2/22/

07:34 ade 

Sync to new bsd.autotools.mk

11:52 ade 

Punt autoconf267->autoconf268

19:57 ade 

Round one migration of ports from automake{19,110} to automake111

18:35 ade 

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

12:22 bsam 

An attempt to fix build at QAT.

Reported by:    QAT

20:01 bsam 

. unbreak by fixing plist;
. bump PORTREVISION.

17:00 bms 

Drop maintainership for these ports.

Regrettably, I have no free time for the foreseeable future which
I can commit directly to these aspects of FreeBSD work, due to
a demanding new role elsewhere.

I am able to review patches from time to time, but regrettably cannot
be directly involved in engineering work beyond this w/o it being
directly involved in day-to-day effort.

Thank you for your understanding.

02:01 ade 

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

20:04 pav 

- Mark BROKEN: incomplete plist

Reported by:    pointyhat
Feature safe:   yes

19:40 bms 

Add port of Sun's OpenPrinting API (PAPI) v1.0 sources.

This port is currently of interest to developers only,
the mod_ipp Apache module dumps core, and the psm_cups
module does not compile as shipped.