21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:22 Tobias C. Berner (tcberner) 

print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>
  *  Anton Berezin <tobez@tobez.org>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Bruce M. Simpson <bms@FreeBSD.org>
  *  CHOI Junho <cjh@FreeBSD.org>
  *  Chuck Robey <chuckr@FreeBSD.org>
  *  D'Arcy Cain <darcy@druid.net>
  *  David O'Brien (obrien@NUXI.com)
  *  David O'Brien <obrien@FreeBSD.org>
  *  David O'Brien <obrien@cs.ucdavis.edu>
  *  Dima Dorfman <dima@unixfreak.org>
  *  Dmitry Kazarov <d.y.kazarov@mail.ru>
  *  Dmitry Sivachenko <dima@Chg.RU>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Fabiano Sidler <fabianosidler@swissonline.ch>
  *  Fernan Aguero <fernan.aguero@gmail.com>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Giuseppe Pilichi aka Jacula Modyun <jacula@gmail.com>
  *  Golyashov Sergey <svvord@soft-wizard.ru>
  *  Gvozdikov Veniamin <g.veniamin@googlemail.com>
  *  Hideaki Ohmon <ohmon@tom.sfc.keio.ac.jp>
  *  Igor Pokrovsky <tiamat@comset.net>
  *  James Bailie <jimmy@mammothcheese.ca>
  *  Jean-Marc Zucconi <jmz@FreeBSD.org> and David O'Brien <obrien@FreeBSD.org>
  *  Jean-Sebastien Roy <js@jeannot.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Joel Sutton <jsutton@bbcon.com.au>
  *  Joerg Wunsch <joerg@FreeBSD.org>
  *  Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
  *  Jose Jachuf <jjachuf@gmail.com>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Juergen Lock <nox@jelal.kn-bremen.de>
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  KANOU Hiroki <kanou@khdd.net>
  *  KATO Tsuguru <tkato@prontomail.com>
  *  Kapil Chowksey
  *  Kentaro Inagaki <JBD01226@niftyserve.ne.jp>
  *  Kimura Fuyuki <fuyuki@hadaly.org>
  *  Klemm <andreas@klemm.gtn.com>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kozlov Sergey <kozlov.sergey.404@gmail.com>
  *  Lars Koeller
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Mark Reidel <ports@mark.reidel.info>
  *  Martin Dieringer <martin.dieringer@gmx.de>
  *  Martin Kammerhofer
  *  Martin Klaffenboeck <martin.klaffenboeck@gmx.at>
  *  Martin Ranne <gasp@ridcully.dnsalias.org>
  *  Matthew Hunt <mph@pobox.com>
  *  Maxim Loginov <Zeliboba@mail.ru>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Moll <kvedulv at kvedulv.de>
  *  Michael Nottebrock <lofi@FreeBSD.org>
  *  Mike Meyer <mwm@mired.org>
  *  Mikhail Teterin
  *  Mita Yoshio <mita@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Oliver Braun <obraun@informatik.unibw-muenchen.de>
  *  Oliver Breuninger <ob@seicom.NET>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Patrick Dung (patrick_dkt@yahoo.com.hk)
  *  Patrick Powell <papowell@astart.com>
  *  Pedro Giffuni
  *  Philip M. Gollucci <pgpollucci@p6m7g8.com>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Robert Withrow <witr@rwwa.com>
  *  Romain Tartiere <romain@FreeBSD.org>
  *  Satoshi Asami <asami@FreeBSD.org>
  *  Satoshi TAOKA <taoka@FreeBSD.org>
  *  Satoshi Taoka <taoka@FreeBSD.org>
  *  Shen Chuan-Hsing <statue@freebsd.sinica.edu.tw>
  *  Simon 'corecode' Schubert <corecode@corecode.ath.cx>
  *  Simun Mikecin <numisemis@yahoo.com>
  *  Stefan Esser <se@FreeBSD.org>
  *  Stefan Hagen <ports@textmail.me>
  *  Stephen Fisher
  *  Steve Wills <swills@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Tim McCormick <tim@pcbsd.org>
  *  Tomokatsu SAITO <saito@a2z.co.jp>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Yuichiro AIZAWA <yaizawa@mdbl.sfc.keio.ac.jp>
  *  amistry@am-productions.biz
  *  andrew@scoop.co.nz
  *  arved
  *  brett@peloton.physics.montana.edu
  *  chuckr@FreeBSD.org
  *  cjm2
  *  dbader@eece.unm.edu
  *  dgilbert@velocet.ca
  *  e-masson@kisoft-services.com
  *  eserte@cs.tu-berlin.de
  *  gahr
  *  giffunip
  *  hrs
  *  ijliao
  *  jmz
  *  joerg
  *  johans
  *  jseger@FreeBSD.org
  *  kline
  *  ljo
  *  lofi@FreeBSD.org
  *  martin.dieringer@gmx.de
  *  mwest@uct.ac.za
  *  oly@world.std.com
  *  patrick, trevor
  *  smace@FreeBSD.org
  *  spcoltri@unm.edu
  *  tg@FreeBSD.org
  *  tobez
  *  wenheping@gmail.com

With hat:	portmgr

    51879c9

18:13 Bernhard Froehlich (decke) 

print/pdflib: Add CPE information

Approved by:	portmgr (blanket)

    6eb700e

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

19:12 crees 

print/pdflib: License allows distribution

Add LICENSE and details.
There is no need for this port to be restricted- it is freely
redistributable.

https://lists.freebsd.org/pipermail/freebsd-ports/2021-March/120412.html

While here, a few style fixes and updates

Reported by:		Patrick M. Hausen <hausen@punkt.de>
Approved by:		maintainer timeout (ale, >14 days)
Differential Revision:	https://reviews.freebsd.org/D29059

 

04:41 kevans 

Multiple ports: improve regex compliance

These changes largely fall into just two categories:

1. Need textproc/gsed for GNU extensions
2. Extraneous escapes that can go away

For #1, there's a further subdivision into those that require autoconf magic
and those that can get away with BINARY_ALIAS=sed=${LOCALBASE}/bin/gsed.
-CURRENT will soon gain GNU extensions, but these will take longer to get to
all supported releases; we must switch them to gsed to ensure we're actually
properly building them as intended.

For #2, I've fixed these as I can and we should upstream these fixes.

PORTREVISION is bumped for all of the above, because we will almost
certainly build these differently when the replacements actually start
working.

These were all detected by the below-referenced exp-run [1]. The patch
included forbids many ordinary characters from being escaped, since we'll
later imbue those with special meanings. This has had the nice side effect
of picking up various things that we didn't handle properly, e.g. \t and \r
for tab and carriage return.

PR:		229925 [1]
Approved by:	koobs (mentor)
Approved by:	portmgr (blanket: trivial build fixes)
MFH:		no (invasive risk)
Differential Revision:	https://reviews.freebsd.org/D25185

 

20:29 sunpoet 

Convert to options target helper

Approved by:	portmgr (blanket)

 

13:14 mat 

Add DOCS options to ports that should have one.

Also various fixes related to said option.

PR:		230864
Submitted by:	mat
exp-runs by:	antoine

 

13:11 mat 

After an include, PLIST_SUB must be appended to, not overwritten.

If it is overwritten, many values will be clobbered, and
pain will ensue.

PR:		230864
Submitted by:	mat
exp-runs by:	antoine

 

08:35 ale 

Update MASTER_SITES to allow fetching.

 

07:34 ale 

Fix build on powerpc and strip binaries.

PR:		222722
Submitted by:	Mark Millard <markmi@dsl-only.net>

 

00:29 linimon 

Begin deorbit burn of ia64.  We have not attempted to build packages for
it for many years.

While here, alphabetize ARCHs, pet portlint, and modernize usages.

Approved by:	portmgr (tier-2 blanket)

 

19:52 tijl 

Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

 

13:08 mat 

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

 

08:57 olgeni 

Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. A few Makefiles
where not included as they contain Latin-1 characters that break
the Phabricator workflow. Categories P-S.

CR:		D422
Approved by:	portmgr (bapt)

 

12:41 amdmi3 

- Switch to USES=libtool, drop .la files

Approved by:	portmgr blanket

 

15:53 ale 

Fix installation of perl binding.

 

14:48 mat 

Fix build when WITH=PERL.

Sponsored by:	Absolight

 

07:38 miwi 

- Stage support

 

22:44 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

 

08:15 az 

- convert to the new perl5 framework
- convert USE_GMAKE to Uses

Approved by:	portmgr (bapt@, blanket)

 

09:42 ale 

Update to 7.0.5p3 and convert to OptionsNG.

12:15 ale 

Avoid namespace collisions between the embedded (modified) png library
and external libpng.so.

Submitted by:   thompsa

11:59 ale 

Fix port.

Pointyhat to:   me

09:17 ale 

- Add forgotten patch
- Switch to OPTIONS
- Add Java bindings [1]

Submitted by:   Oliver Brandmueller <ob@e-Gitt.NET> [1]

11:40 ale 

Update to 7.0.5 release and remove unneeded libtool hacks.

15:26 miwi 

- Remove WITH_FBSD10_FIX, is no longer needed

07:20 miwi 

- Fix build on FreeBSD 10

Reported by:    pointyhat

07:34 ade 

Sync to new bsd.autotools.mk

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

08:02 ale 

Update to 7.0.4p4 release.

17:39 ale 

Update to 7.0.3 release.

05:52 ale 

Update to 7.0.2 release.

12:35 ale 

Update to 7.0.0p3 release and make it fetchable again.

10:31 ale 

Restore major 7.0.0p1 PORTVERSION to make scripts happy.
No functional changes.

Discussed with: erwin
Approved by:    portmgr (implicitly)

08:30 ale 

Fix fetching.

Approved by:    portmgr (implicitly)

16:13 ale 

Update to 7.0.0p1 release and make it fetchable again.

Approved by:    portmgr (marcus)

08:17 ale 

Update to 7.0.0 release.

01:03 edwin 

Remove USE_REINPLACE from all categories starting with P

10:28 ale 

Update to 6.0.3 release and make it fetchable again.

Approved by:    portmgr (kris)

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

07:59 ale 

Update to 6.0.2 release.

18:46 krion 

Make fetchable again.

Approved by:    portmgr (implicit)

15:49 lawrance 

Fix a vulnerability in libtiff embedded in this port.
Bump PORTREVISION.

Approved by:    ale (maintainer) is away
Obtained from:  libtiff CVS http://www.remotesensing.org/libtiff/
Security:      
http://vuxml.FreeBSD.org/68222076-010b-11da-bc08-0001020eed82.html
                CAN-2005-1544

11:21 ale 

- Fix tiff vulnerability
- Fix pdf generation on 64bit architectures [1]

PR:             ports/76385 [1]
Submitted by:   UEMURA Tetsuya <t_uemura@macome.co.jp> [1]

15:26 nectar 

Mark FORBIDDEN due to exploitable vulnerability
http://vuxml.freebsd.org/fc7e6a42-6012-11d9-a9e7-0001020eed82.html

10:51 ale 

Update to 6.0.1 release:
- Unmark BROKEN
- Use libtool15

22:51 krion 

BROKEN: Unfetchable

14:44 ale 

Update to 6.0.0p1 release.

11:23 ale 

- Update to 6.0.0 release
- Re-enable cxx support

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

22:55 ale 

A new tarball was re-rolled with my fix for pdflib-perl.

Noticed by:     simon
Approved by:    nork (mentor/implicitly)

05:10 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

01:27 ale 

Fix installation of pdflib-perl.

Reported by:    bento via kris
Approved by:    nork (mentor/implicitly)

00:24 ale 

Update to 5.0.3 release.

Noticed by:     Alistair Buckle <mail_w@agtb.freeserve.co.uk>
Approved by:    nork (mentor/implicitly)

10:50 ale 

Switch to my @FreeBSD.org email address.

Approved by:    nork (mentor)

23:35 edwin 

[Maintainer Update] Port: print/pdflib

        Update to 5.0.2 release.

PR:             ports/57204
Submitted by:   Alex Dupre <sysadmin@alexdupre.com>

06:25 leeym 

Update to 5.0.1 (and fix unfetchable distfile).

PR:             52885
Submitted by:   Alex Dupre <sysadmin@alexdupre.com>

03:36 marcus 

Add a PKGNAMESUFFIX when building with Perl to avoid a duplicate entry
in INDEX.

Reported by:    kris

05:03 edwin 

[Maintainer Update] Port: print/pdflib

        Update from 4.0.3 to 5.0.0 release.

PR:             ports/50715
Submitted by:   Alex Dupre <sysadmin@alexdupre.com>

23:01 marcus 

Allow this port to take a slave port.

07:04 edwin 

[Maintainer Patch] print/pdflib (USE_LIBTOOL, WITH_PERL, install fonts)
(really this time)

PR:             ports/48961
Submitted by:   Alex Dupre <sysadmin@alexdupre.com>

01:09 edwin 

[Maintainer Patch] print/pdflib (USE_LIBTOOL, WITH_PERL, install fonts)

PR:             ports/48961
Submitted by:   Alex Dupre <sysadmin@alexdupre.com>

13:23 knu 

De-pkg-comment.

05:05 max 

Add back USE_GMAKE which was accidentally removed during the upgrade.
This is needed as recent bmake (such as on 4.6) doesn't work with the Makefile,
while older bmake (such as on 4.4) works.
Submitted by:   maintainer

15:49 pat 

Update to 4.0.3

PR:             39616
Submitted by:   maintainer

06:48 max 

Define USE_GMAKE as the build fails with bmake from recent -stable.
Since bmake from a few months ago can handle this port, it is likely
issues with recent chages to bmake.

01:27 pat 

Update to 4.0.2    

19:53 dwcjr 

Add MASTER_SITES because pdflib.com doesn't keep older versions around    

16:04 dwcjr 

Update pdflib to v 4    

15:47 dwcjr 

Resurrect pdflib so that it can be upgraded to pdflib v 4    

14:49 dirk 

Remove pdflib in favour of pdflib3.  

10:24 mharo 

remove deprecated fetch options from FETCH_BEFORE_ARGS    

22:52 asami 

Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    

09:48 sobomax 

Fourth round of INSTALLS_SHLIBS conversion.