non port: print/ps2eps/Makefile |
Number of commits found: 21 |
Sunday, 25 Feb 2024
|
12:03 Muhammad Moinur Rahman (bofh)
print/ps2eps: Moved man to share/man
Approved by: portmgr (blanket)
0148b8d |
Friday, 3 Nov 2023
|
07:17 Michael Osipov (michaelo)
*/*: Bump PORTREVISION for Ghostscript 10 change
Reported by: sunpoet
Approved by: jrm (mentor), sunpoet
Differential Revision: https://reviews.freebsd.org/D42412
fcf68ae5e |
Wednesday, 7 Sep 2022
|
21:10 Stefan Eßer (se)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.
There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.
The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.
Approved by: portmgr (tcberner)
b7f0544 |
Wednesday, 20 Jul 2022
|
14:22 Tobias C. Berner (tcberner)
print: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com>
* Alexander Vereeken <Alexander88207@protonmail.com>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alonso Cardenas Marquez <acm@FreeBSD.org>
* Andreas Klemm <andreas@FreeBSD.org>
* Andreas Klemm <andreas@klemm.gtn.com>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Anish Mistry <amistry@am-productions.biz>
* Anton Berezin <tobez@tobez.org>
* Bruce M Simpson <bms@FreeBSD.org>
* Bruce M. Simpson <bms@FreeBSD.org>
* CHOI Junho <cjh@FreeBSD.org>
* Chuck Robey <chuckr@FreeBSD.org>
* D'Arcy Cain <darcy@druid.net>
* David O'Brien (obrien@NUXI.com)
* David O'Brien <obrien@FreeBSD.org>
* David O'Brien <obrien@cs.ucdavis.edu>
* Dima Dorfman <dima@unixfreak.org>
* Dmitry Kazarov <d.y.kazarov@mail.ru>
* Dmitry Sivachenko <dima@Chg.RU>
* Emanuel Haupt <ehaupt@FreeBSD.org>
* Fabiano Sidler <fabianosidler@swissonline.ch>
* Fernan Aguero <fernan.aguero@gmail.com>
* Fernan Aguero <fernan@iib.unsam.edu.ar>
* Giuseppe Pilichi aka Jacula Modyun <jacula@gmail.com>
* Golyashov Sergey <svvord@soft-wizard.ru>
* Gvozdikov Veniamin <g.veniamin@googlemail.com>
* Hideaki Ohmon <ohmon@tom.sfc.keio.ac.jp>
* Igor Pokrovsky <tiamat@comset.net>
* James Bailie <jimmy@mammothcheese.ca>
* Jean-Marc Zucconi <jmz@FreeBSD.org> and David O'Brien <obrien@FreeBSD.org>
* Jean-Sebastien Roy <js@jeannot.org>
* Joe Marcus Clarke <marcus@FreeBSD.org>
* Joel Sutton <jsutton@bbcon.com.au>
* Joerg Wunsch <joerg@FreeBSD.org>
* Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
* Jose Jachuf <jjachuf@gmail.com>
* Joseph Koshy <jkoshy@FreeBSD.org>
* Juergen Lock <nox@jelal.kn-bremen.de>
* Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
* KANOU Hiroki <kanou@khdd.net>
* KATO Tsuguru <tkato@prontomail.com>
* Kapil Chowksey
* Kentaro Inagaki <JBD01226@niftyserve.ne.jp>
* Kimura Fuyuki <fuyuki@hadaly.org>
* Klemm <andreas@klemm.gtn.com>
* Koop Mast <kwm@FreeBSD.org>
* Kozlov Sergey <kozlov.sergey.404@gmail.com>
* Lars Koeller
* Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
* Mark Pulford <mark@kyne.com.au>
* Mark Reidel <ports@mark.reidel.info>
* Martin Dieringer <martin.dieringer@gmx.de>
* Martin Kammerhofer
* Martin Klaffenboeck <martin.klaffenboeck@gmx.at>
* Martin Ranne <gasp@ridcully.dnsalias.org>
* Matthew Hunt <mph@pobox.com>
* Maxim Loginov <Zeliboba@mail.ru>
* Michael Johnson <ahze@FreeBSD.org>
* Michael Moll <kvedulv at kvedulv.de>
* Michael Nottebrock <lofi@FreeBSD.org>
* Mike Meyer <mwm@mired.org>
* Mikhail Teterin
* Mita Yoshio <mita@FreeBSD.org>
* Nicola Vitale <nivit@email.it>
* Oliver Braun <obraun@informatik.unibw-muenchen.de>
* Oliver Breuninger <ob@seicom.NET>
* Olivier Cochard-Labbe <olivier@FreeBSD.org>
* Patrick Dung (patrick_dkt@yahoo.com.hk)
* Patrick Powell <papowell@astart.com>
* Pedro Giffuni
* Philip M. Gollucci <pgpollucci@p6m7g8.com>
* Piotr Kubaj <pkubaj@anongoth.pl>
* Po-Chuan Hsieh <sunpoet@FreeBSD.org>
* Robert Withrow <witr@rwwa.com>
* Romain Tartiere <romain@FreeBSD.org>
* Satoshi Asami <asami@FreeBSD.org>
* Satoshi TAOKA <taoka@FreeBSD.org>
* Satoshi Taoka <taoka@FreeBSD.org>
* Shen Chuan-Hsing <statue@freebsd.sinica.edu.tw>
* Simon 'corecode' Schubert <corecode@corecode.ath.cx>
* Simun Mikecin <numisemis@yahoo.com>
* Stefan Esser <se@FreeBSD.org>
* Stefan Hagen <ports@textmail.me>
* Stephen Fisher
* Steve Wills <swills@FreeBSD.org>
* Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
* TAKATSU Tomonari <tota@FreeBSD.org>
* Thierry Thomas <thierry@pompo.net>
* Thomas Gellekum <tg@FreeBSD.org>
* Tim McCormick <tim@pcbsd.org>
* Tomokatsu SAITO <saito@a2z.co.jp>
* Veniamin Gvozdikov <vg@FreeBSD.org>
* Wen Heping <wenheping@gmail.com>
* Yuichiro AIZAWA <yaizawa@mdbl.sfc.keio.ac.jp>
* amistry@am-productions.biz
* andrew@scoop.co.nz
* arved
* brett@peloton.physics.montana.edu
* chuckr@FreeBSD.org
* cjm2
* dbader@eece.unm.edu
* dgilbert@velocet.ca
* e-masson@kisoft-services.com
* eserte@cs.tu-berlin.de
* gahr
* giffunip
* hrs
* ijliao
* jmz
* joerg
* johans
* jseger@FreeBSD.org
* kline
* ljo
* lofi@FreeBSD.org
* martin.dieringer@gmx.de
* mwest@uct.ac.za
* oly@world.std.com
* patrick, trevor
* smace@FreeBSD.org
* spcoltri@unm.edu
* tg@FreeBSD.org
* tobez
* wenheping@gmail.com
With hat: portmgr
51879c9 |
Tuesday, 6 Apr 2021
|
14:31 Mathieu Arnold (mat)
Remove # $FreeBSD$ from Makefiles.
305f148 |
Wednesday, 1 Jul 2020
|
08:50 danfe
Register mutual installation conflict between the two ports.
PR: 192643
Submitted by: truckman
|
Tuesday, 19 Jul 2016
|
11:04 mat
When there is a do-install target, do not use a post-install target, do
everything at once. Sometime, rename post-install into a options helper
target.
I did not fix ports that were such a mess that I could not figure out
what they really wanted to do. I also did not change ports that had
some version of an auto-plist code in post-install, for the same reason.
With hat: portmgr
Sponsored by: Absolight
|
Thursday, 24 Mar 2016
|
15:47 tijl
Make print/ghostscript9-agpl-base the default Ghostscript port. Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.
Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.
Fix print/ghostscript9-agpl-base to install eps2write.
Update math/asymptote to 2.37 to support newer Ghostscript.
PR: 208159
Exp-run by: antoine
Approved by: portmgr (antoine)
|
Wednesday, 2 Mar 2016
|
05:41 lwhsu
- Update maintainer's email address
Submitted by: maintainer (via facebook chat)
|
Saturday, 22 Aug 2015
|
17:48 hrs
- Split ghostscript into X11-independent and -dependent parts:
* print/ghostscript{7,8,9,9-agpl}-base
Installs Ghostscript binary, libgs, and related files.
These ports do not depend on X11 libraries (i.e. x11* devices
are not available). USES=ghostscript will set dependency on
one of them depending on GHOSTSCRIPT_DEFAULT.
The default device is set to "display" or "bbox".
* print/ghostscript{7,8,9,9-agpl}-x11
Installs a shared library which provides X11 support to
the installed Ghostscript binaries. x11* devices will be
enabled when the library is available.
This depends on *-base (RUN_DEPENDS). USES=ghostscript:x11
will set dependency on one of them.
- Fix integer overflow reported as CVE-2015-3228.
- Update Uses/ghostscript.mk:
* Add x11 keyword. nox11 keyword is now obsolete.
* Use packagename in *_DEPENDS line to prevent relationship between
-base and -x11 packages from being broken.
- Fix x11/nox11 keyword and bump PORTREVISION in ports using
USES=ghostscript to update dependency of pre-compiled packages.
|
Thursday, 16 Jul 2015
|
20:53 kwm
Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.
Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl
PR: 201201 (exp-run)
Approved by: portmgr (mat@)
Exp run by: antione@ (previous patch)
Differential Revision: https://reviews.freebsd.org/D2938
|
Monday, 7 Jul 2014
|
12:43 vanilla
1: Stagify.
2: switch PORTNODOCS to options.
Approved by: portmgr@ (blanket)
|
Friday, 20 Sep 2013
|
22:44 bapt
Add NO_STAGE all over the place in preparation for the staging support (cat:
print)
|
Wednesday, 4 Sep 2013
|
13:07 az
- convert to the new perl5 framework
Approved by: portmgr (bapt@, blanket)
|
Friday, 1 Jun 2012
|
05:26 dinoex
- update png to 1.5.10
|
Sunday, 28 Mar 2010
|
06:47 dinoex
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
Friday, 5 Feb 2010
|
11:46 dinoex
- update to jpeg-8
|
Sunday, 4 May 2008
|
02:32 vanilla
Upgrade to 1.64.
PR: ports/123374
Submitted by: maintainer
|
Saturday, 19 May 2007
|
20:32 flz
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
|
Tuesday, 24 Jan 2006
|
08:27 pav
- Add another master site
PR: ports/92244
Submitted by: Jui-Nan Lin <jnlin@csie.nctu.edu.tw> (maintainer)
|
Saturday, 31 Dec 2005
|
23:39 pav
ps2eps is a tool (written in Perl) to produce Encapsulated PostScript Files
(EPS/EPSF) from usual one-paged Postscript documents. It calculates correct
Bounding Boxes for those EPS files and filters some special postscript command
sequences that can produce erroneous results on printers.
PR: ports/91099
Submitted by: Jui-Nan Lin <jnlin@csie.nctu.edu.tw>
|
Number of commits found: 21 |