19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

15:58 Dmitry Marakasov (amdmi3) 

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

    77d6847

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:22 Tobias C. Berner (tcberner) 

print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>
  *  Anton Berezin <tobez@tobez.org>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Bruce M. Simpson <bms@FreeBSD.org>
  *  CHOI Junho <cjh@FreeBSD.org>
  *  Chuck Robey <chuckr@FreeBSD.org>
  *  D'Arcy Cain <darcy@druid.net>
  *  David O'Brien (obrien@NUXI.com)
  *  David O'Brien <obrien@FreeBSD.org>
  *  David O'Brien <obrien@cs.ucdavis.edu>
  *  Dima Dorfman <dima@unixfreak.org>
  *  Dmitry Kazarov <d.y.kazarov@mail.ru>
  *  Dmitry Sivachenko <dima@Chg.RU>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Fabiano Sidler <fabianosidler@swissonline.ch>
  *  Fernan Aguero <fernan.aguero@gmail.com>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Giuseppe Pilichi aka Jacula Modyun <jacula@gmail.com>
  *  Golyashov Sergey <svvord@soft-wizard.ru>
  *  Gvozdikov Veniamin <g.veniamin@googlemail.com>
  *  Hideaki Ohmon <ohmon@tom.sfc.keio.ac.jp>
  *  Igor Pokrovsky <tiamat@comset.net>
  *  James Bailie <jimmy@mammothcheese.ca>
  *  Jean-Marc Zucconi <jmz@FreeBSD.org> and David O'Brien <obrien@FreeBSD.org>
  *  Jean-Sebastien Roy <js@jeannot.org>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Joel Sutton <jsutton@bbcon.com.au>
  *  Joerg Wunsch <joerg@FreeBSD.org>
  *  Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
  *  Jose Jachuf <jjachuf@gmail.com>
  *  Joseph Koshy <jkoshy@FreeBSD.org>
  *  Juergen Lock <nox@jelal.kn-bremen.de>
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  KANOU Hiroki <kanou@khdd.net>
  *  KATO Tsuguru <tkato@prontomail.com>
  *  Kapil Chowksey
  *  Kentaro Inagaki <JBD01226@niftyserve.ne.jp>
  *  Kimura Fuyuki <fuyuki@hadaly.org>
  *  Klemm <andreas@klemm.gtn.com>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kozlov Sergey <kozlov.sergey.404@gmail.com>
  *  Lars Koeller
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Mark Reidel <ports@mark.reidel.info>
  *  Martin Dieringer <martin.dieringer@gmx.de>
  *  Martin Kammerhofer
  *  Martin Klaffenboeck <martin.klaffenboeck@gmx.at>
  *  Martin Ranne <gasp@ridcully.dnsalias.org>
  *  Matthew Hunt <mph@pobox.com>
  *  Maxim Loginov <Zeliboba@mail.ru>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Moll <kvedulv at kvedulv.de>
  *  Michael Nottebrock <lofi@FreeBSD.org>
  *  Mike Meyer <mwm@mired.org>
  *  Mikhail Teterin
  *  Mita Yoshio <mita@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Oliver Braun <obraun@informatik.unibw-muenchen.de>
  *  Oliver Breuninger <ob@seicom.NET>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Patrick Dung (patrick_dkt@yahoo.com.hk)
  *  Patrick Powell <papowell@astart.com>
  *  Pedro Giffuni
  *  Philip M. Gollucci <pgpollucci@p6m7g8.com>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Robert Withrow <witr@rwwa.com>
  *  Romain Tartiere <romain@FreeBSD.org>
  *  Satoshi Asami <asami@FreeBSD.org>
  *  Satoshi TAOKA <taoka@FreeBSD.org>
  *  Satoshi Taoka <taoka@FreeBSD.org>
  *  Shen Chuan-Hsing <statue@freebsd.sinica.edu.tw>
  *  Simon 'corecode' Schubert <corecode@corecode.ath.cx>
  *  Simun Mikecin <numisemis@yahoo.com>
  *  Stefan Esser <se@FreeBSD.org>
  *  Stefan Hagen <ports@textmail.me>
  *  Stephen Fisher
  *  Steve Wills <swills@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Tim McCormick <tim@pcbsd.org>
  *  Tomokatsu SAITO <saito@a2z.co.jp>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Yuichiro AIZAWA <yaizawa@mdbl.sfc.keio.ac.jp>
  *  amistry@am-productions.biz
  *  andrew@scoop.co.nz
  *  arved
  *  brett@peloton.physics.montana.edu
  *  chuckr@FreeBSD.org
  *  cjm2
  *  dbader@eece.unm.edu
  *  dgilbert@velocet.ca
  *  e-masson@kisoft-services.com
  *  eserte@cs.tu-berlin.de
  *  gahr
  *  giffunip
  *  hrs
  *  ijliao
  *  jmz
  *  joerg
  *  johans
  *  jseger@FreeBSD.org
  *  kline
  *  ljo
  *  lofi@FreeBSD.org
  *  martin.dieringer@gmx.de
  *  mwest@uct.ac.za
  *  oly@world.std.com
  *  patrick, trevor
  *  smace@FreeBSD.org
  *  spcoltri@unm.edu
  *  tg@FreeBSD.org
  *  tobez
  *  wenheping@gmail.com

With hat:	portmgr

    51879c9

15:57 Po-Chuan Hsieh (sunpoet) 

print/py-pycups: Cosmetic change

    21da4fe

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

13:46 kai 

Relax hardcoded paths to fix build with Python 3.8.7

Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme.  This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".

The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.

Remedy the issue by adding wildcards to these paths.  This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.

[1] https://bugs.python.org/issue42604

PR:		252057
Reported by:	John Kennedy
Reviewed by:	fluffy, koobs
Approved by:	koobs (python)

 

01:57 sunpoet 

Update to 2.0.1

Changes:	https://github.com/OpenPrinting/pycups/blob/master/NEWS

 

09:35 sunpoet 

Update to 1.9.74

- Update WWW

Changes:	https://github.com/zdohnal/pycups/blob/master/NEWS

 

14:14 sunpoet 

Clean up Makefile

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

20:24 sunpoet 

Add py3-pycups: slave port of py-pycups

- Add SLAVEDIRS to py-pycups

Requested by:	kwm

 

14:16 mat 

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

 

11:53 tijl 

Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters
have been moved from cups to cups-filters and they have been configured to
use PDF as an intermediate format instead of PostScript.

Merging of cups-base, cups-client and cups-image into print/cups:
- cups-image provides a library to work with the cups raster format.  It is
  only used to implement filters and printer drivers and these only exist
  in the context of a cups server so there's no need to separate this from
  cups-base.
- cups-client provides a library that allows applications to print via cups.
  It is possible to use the library to access a remote cups server without
  running a local cups server, but such a setup is discouraged and the
  configuration file to set this up has been marked deprecated.  It is
  better to run a local cups server and let that talk to the remote cups
  server because then you have the benefits of local job queuing in case the
  remote server is down or busy.  Given this and the fact that without
  filters cups-base is now smaller than it used to be it makes sense to
  merge the ports.  The patch also adds options IPPTOOL, DOCS and NLS which
  when disabled make the new cups package smaller than the current
  cups-client package.  Merging the ports also prevents problems with
  options like ZEROCONF being configured differently in both ports.
- print/cups was a metaport that depended on cups-base and some filters.
  There isn't really a need for such a metaport so cups-base can be renamed
  to cups.  The filters can be depended on by printer drivers such as hplip
  if they need them.

Additional changes to the new print/cups:
- Clean up the patches.  They seem to have been regenerated with post-patch
  changes included.
- Add a patch to prevent intermediate conversion to PDF when a PostScript
  file is sent to a PostScript printer when cups-filters is installed.
- Fix the PAM configuration file.
- Add a patch to let the server search /usr/local/share/ppd like on Linux so
  other ports don't have to add links to it.
- Remove ulpt(4) helper scripts.  The port uses libusb with ugen(4).
- Remove support for mDNSResponder.  cups-filters only supports Avahi.
- Combine ICONS and XDG_OPEN options into an X11 option to support WITHOUT_X11.
- Optionally depend on colord for ICC profile support.
- Various smaller changes.

Changes to print/cups-filters:
- Let the cups_browsed rc.d script depend on cupsd and avahi_daemon instead
  of LOGIN.
- Development of foomatic-filters has been moved to cups-filters so let this
  port install foomatic related files and add foomatic-filters to CONFLICTS.
- Fix location of liblouis tables.
- Add patch to fix ICC support.

Changes to print/cups-pstoraster:
This port is essentially an old version of Ghostscript plus a cups filter.
It's no longer developed.  This commit removes it and changes existing
dependencies to print/cups-filters which depends on print/ghostscript* and
includes a gstoraster filter that can handle both PostScript and PDF.

Changes to print/foomatic-db*:
Remove old MASTER_SITES and dependencies and eliminate PKGNAMEPREFIX.

Changes to print/foomatic-filters:
Install beh backend with its original name again and add cups-filters to
CONFLICTS.

Changes to print/hplip:
- Stop installing hpijs/foomatic-rip support.  This is no longer supported
  upstream.
- Stop installing hpcups PPDs.  These are now automatically generated.  The
  bundled PPDs are generated for an older version of cups.
- Rename the QT option to X11 to support WITHOUT_X11.
- Simplify the patches now that ports are installed in a staging area.
- Add a patch to set SO_REUSEPORT (next to SO_REUSEADDR) on the mDNS socket
  like avahi-daemon does.  This fixes Zeroconf support for HP network
  printers.

PR:		207746
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

10:02 sunpoet 

- Move print/py-cups to print/py-pycups
- Bump PORTREVISION for dependent ports