| non port: science/ecs/Makefile |
|
SVNWeb
|
Number of commits found: 45 |
|
Wed, 5 Sep 2018
|
[ 22:05 sunpoet  ]   (Only the first 10 of 50 ports in this commit are shown above.  )
Update science/hdf5 to 1.10.2
- Bump PORTREVISION of dependent ports for shlib change
Changes: https://portal.hdfgroup.org/display/support/HDF5%201.10.2#releasenotes
https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.10/hdf5-1.10.2/src/hdf5-1.10.2-RELEASE.txt
PR: 231009
Exp-run by: antoine
|
|
Sat, 10 Mar 2018
|
[ 17:46 gerald ] (Only the first 10 of 1104 ports in this commit are shown above. )
Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).
|
|
Thu, 16 Nov 2017
|
[ 20:55 thierry ]
Chase metis-edf's upgrade.
|
|
Tue, 30 May 2017
|
[ 02:56 sunpoet ] (Only the first 10 of 35 ports in this commit are shown above. )
Update science/hdf5 to 1.10.1
- Bump PORTREVISION for shlib change
Changes: https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.10/hdf5-1.10.1/src/hdf5-1.10.1-RELEASE.txt
|
|
Wed, 25 May 2016
|
[ 15:43 mat ] (Only the first 10 of 83 ports in this commit are shown above. )
Remove useless WRKSRC definitions.
While there, correct DEV_WARNINGS when they occur.
Sponsored by: Absolight
|
|
Wed, 20 Apr 2016
|
[ 20:42 sunpoet ] (Only the first 10 of 32 ports in this commit are shown above. )
- Update to 1.10.0
- Add LICENSE_FILE
- Remove outdated PORTSCOUT
- Re-enable SZIP option by default: it was changed unintentionally in r398300
Changes: https://www.hdfgroup.org/ftp/HDF5/releases/hdf5-1.10/hdf5-1.10.0/src/hdf5-1.10.0-RELEASE.txt
https://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
|
|
Fri, 1 Apr 2016
|
[ 14:25 mat ] (Only the first 10 of 2099 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight
|
|
Sun, 24 May 2015
|
[ 08:10 sunpoet ] (Only the first 10 of 27 ports in this commit are shown above. )
- Update to 1.8.15
- Bump PORTREVISION for science/hdf5 shlib change
Changes: http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.15-RELEASE.txt
http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
|
|
Thu, 14 May 2015
|
[ 17:31 thierry ]
Upgrade ncs to 2.0.8 with its dependencies.
|
|
Wed, 8 Apr 2015
|
[ 22:07 thierry ]
Fix with on FreeBSD-8.x and 9.x: stdint.h is needed with scotch.
|
|
Tue, 24 Mar 2015
|
[ 22:17 marino ] (Only the first 10 of 26 ports in this commit are shown above. )
3 ports categories: Remove $PTHREAD_LIBS
Categories: print, science, emulators
approved by: PTHREAD blanket
|
|
Sun, 18 Jan 2015
|
[ 10:39 sunpoet ] (Only the first 10 of 28 ports in this commit are shown above. )
- Update to 1.8.14
- Update MASTER_SITES
- Use INSTALL_TARGET=install-strip instead of
MAKE_ENV=INSTALL_STRIP_FLAG=${STRIP}
- Bump PORTREVISION for science/hdf5 shlib change
Changes: http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.14-RELEASE.txt
http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
|
|
Sun, 14 Sep 2014
|
[ 14:42 thierry ]
Upgrade to version 2.0.3.
PR: ports/193296
Submitted by: pfg
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Mon, 21 Jul 2014
|
[ 21:57 bapt ]
Fix build with texlive
|
|
Sat, 3 May 2014
|
[ 00:55 sunpoet ] (Only the first 10 of 28 ports in this commit are shown above. )
- Update to 1.8.12 (from science/hdf5-18)
- Add LICENSE
- Convert to new LIB_DEPENDS format
- Convert to new options helper
- Use NOT_FOR_ARCHS
- Strip shared library
- Remove deprecated PTHREAD_*
- Use MAKE_CMD
- Bump PORTREVISION for science/hdf5 shlib change [1]
Changes: http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.12-RELEASE.txt
http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
Approved by: portmgr (bapt) [1]
|
|
Thu, 17 Apr 2014
|
[ 20:31 thierry ]
- Upgrade cgnslib to 3.2.1
Changelog at <https://sourceforge.net/projects/cgns/files/cgnslib_3.2/>
- Bump PORTREVISION of consumers ports.
|
|
Wed, 26 Mar 2014
|
[ 23:29 thierry ]
- Unbreak Code_Saturne;
- Adapt to the new infrastructure.
Note: these ports should be upgraded - this is on my todo list.
|
|
Mon, 10 Mar 2014
|
[ 20:55 gerald ] (Only the first 10 of 1081 ports in this commit are shown above. )
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
|
[ 17:01 bapt ] (Only the first 10 of 51 ports in this commit are shown above. )
Convert s* to USES=zip
|
|
Fri, 21 Feb 2014
|
[ 13:39 ehaupt ]
Remove trailing whitespaces from category science
|
|
Mon, 10 Feb 2014
|
[ 13:54 ehaupt ] (Only the first 10 of 581 ports in this commit are shown above. )
According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.
This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.
Approved by: portmgr (bapt)
|
|
Sat, 26 Oct 2013
|
[ 00:52 gerald ] (Only the first 10 of 1147 ports in this commit are shown above. )
Update to libmpc version 1.0.1 which brings the following fixes:
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 20 Sep 2013
|
[ 22:48 bapt ] (Only the first 10 of 185 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
science)
|
|
Tue, 4 Jun 2013
|
[ 14:40 bapt ]
WITHOUT_NLS -> PORT_OPTIONS:MNLS
NOPORTDOCS -> PORT_OPTIONS:MDOCS
NOPORTEXAMPLES -> PORT_OPTIONS:MEXAMPLES
|
|
Sat, 11 May 2013
|
[ 17:58 hrs ] (Only the first 10 of 152 ports in this commit are shown above. )
Rectify USE_TEX to support both of teTeX and TeXLive.
TEX_DEFAULT:
A knob to choose teTeX or TeXLive. One can specify in /etc/make.conf.
USE_TEX:
A knob for port developers. Valid keywords are listed in
bsd.tex.mk.
|
|
Mon, 6 May 2013
|
[ 02:00 hrs ] (Only the first 10 of 150 ports in this commit are shown above. )
Remove *_DEPENDS from ports which depend on teTeX and add USE_TEX=tetex
instead to make migration to TeXLive easier.
|
|
Sat, 27 Apr 2013
|
[ 18:25 mva ] (Only the first 10 of 181 ports in this commit are shown above. )
- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig and
USE_GETTEXT=yes to USES=gettext while here
|
|
Wed, 24 Apr 2013
|
[ 18:10 ak ] (Only the first 10 of 1028 ports in this commit are shown above. )
- Convert USE_GETTEXT to USES (part 3)
Approved by: portmgr (bapt)
|
|
Tue, 19 Mar 2013
|
[ 20:35 thierry ]
Chase french/med upgrade.
|
|
Mon, 9 Jul 2012
|
[ 11:11 bf ] (Only the first 10 of 18 ports in this commit are shown above. )
add math/metis4 to math/Makefile; update math/metis to 5.0.2; add appropriate
CONFLICTS, LATEST_LINK, and PORTSCOUT; adjust dependent ports; explicitly
note the restrictive license of the metis ports (while here, append the MPI port
to
*DEPENDS in math/parmetis, rather than using an assignment)
PR: 169578
|
|
Sat, 7 Jul 2012
|
[ 15:15 thierry ] (Only the first 10 of 19 ports in this commit are shown above. )
Upgrade Code_Saturne to 2.0.
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Fri, 15 Jul 2011
|
[ 07:00 sunpoet ] (Only the first 10 of 26 ports in this commit are shown above. )
- Bump PORTREVISION for science/hdf5-18 shlib change
|
|
Sat, 26 Feb 2011
|
[ 10:23 thierry ]
Chase the upgrade of science/cgnslib to 2.5-5; this implies to
switch some dependencies from science/hdf5 to science/hdf5-18.
As a side note: I think that all ports depending on science/hdf5
could be switched to science/hdf5-18, by defining H5_USE_16_API
when necessary, and then science/hdf5 could be deprecated.
PR: ports/154736
|
|
Mon, 31 May 2010
|
[ 02:01 ade ] (Only the first 10 of 1416 ports in this commit are shown above. )
Bounce PORTREVISION for gettext-related ports. Have fun, ya'll.
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
|
Mon, 26 Jan 2009
|
[ 17:52 thierry ]
Upgrade to 1.3.3.
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 6 Jun 2008
|
[ 13:59 edwin ] (Only the first 10 of 44 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Wed, 30 Apr 2008
|
[ 22:14 thierry ] (Only the first 10 of 19 ports in this commit are shown above. )
Upgrade Code_Saturne to 1.3.2.
Code_Saturne 1.3.2 contains important corrections in the extended
neighbourhood (used for gradient calculation with options IMRGRA=2 and 3
and for the LES dynamic model), in the steady-state algorithm and for
rotation periodicity. Therefore it is strongly advised to upgrade to
version 1.3.2. Earlier releases of version 1.3 (especially versions 1.3.f
and 1.3.1) are considered obsolete and have been removed from the website.
Note: the pdf handbooks don't build at the moment, but they are
available from the Code_Saturne's main site.
|
|
Tue, 1 Jan 2008
|
[ 16:45 thierry ]
Upgrade ECS to 1.3.1.
|
|
Sun, 17 Jun 2007
|
[ 21:04 thierry ] (Only the first 10 of 33 ports in this commit are shown above. )
Code_Saturne is EDF's general purpose computational fluid dynamics
software. Developed since 1997 at EDF R&D, it is based on a co-located
Finite Volume approach that accepts meshes with any type of
cell (tetrahedral, hexahedral, prismatic, pyramidal, polyhedral, ...)
and any type of grid structure (unstructured, blockstructured, hybrid,
conforming or with hanging nodes, ...).
Its basic capabilities enable the handling of either incompressible or
expandable flows with or without heat transfer and turbulence (mixing
length, 2-equation models, v2f, Reynolds stress models, Large Eddy
Simulations, ...).
<http://rd.edf.com/code_saturne/>
|
Number of commits found: 45 |
As an Amazon Associate I earn from qualifying purchases.