| non port: science/hdf/Makefile |
|
SVNWeb
|
Number of commits found: 68 |
|
Fri, 28 Jul 2023
|
[ 17:13 Daniel Engberg (diizzy)  ]    664a2fa (Only the first 10 of 502 ports in this commit are shown above.  )
*/*: Bump jpeg-turbo users treewide
New major version 3.0.0
|
|
Sun, 23 Apr 2023
|
[ 09:09 Gerald Pfeifer (gerald) ] 8d3e020 (Only the first 10 of 2091 ports in this commit are shown above. )
*: Bump PORTREVISIONs for math/mpc update to 1.3.1
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 4619604 (Only the first 10 of 201 ports in this commit are shown above. )
science: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Andreas Fehlner <fehlner@gmx.de>
* Brad Huntting <huntting@glarp.com>
* Chao Shin <quakelee@cn.FreeBSD.org>
* Cheng-Lung Sung <clsung@FreeBSD.org>
* Chia-Hsing Yu <me@davidyu.org>
* Chris Rees <utisoft@gmail.com>
* David Naylor <dbn@FreeBSD.org>
* Dmitry Sivachenko <demon@FreeBSD.org>
* Ed Schouten <ed@FreeBSD.org>
* Eric Freeman <freebsdports@chillibear.com>
* Erik B Knudsen (Only the first 15 lines of the commit message are shown above )
|
|
Thu, 16 Jun 2022
|
[ 15:13 Po-Chuan Hsieh (sunpoet) ] 328ae40 (Only the first 10 of 52 ports in this commit are shown above. )
*/*: Replace science/szip with science/libaec
- Bump PORTREVISION of dependent ports for dependency change
szip does not allow redistribution in binary form without proper commercial
license. Its LICENSE_PERMS should be set to no-auto-accept which blocks building
this port, therefore building dependent ports are also blocked. Switch all
dependent ports to science/libaec to avoid conflicts and license issue.
PR: 228743, 246097, 250165
|
|
Wed, 16 Jun 2021
|
[ 22:33 Piotr Kubaj (pkubaj) ] 499a93b
science/hdf: add back the previously removed powerpc workaround
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 17 Nov 2020
|
[ 22:21 linimon ]  
Add workaround for Fortran frontend to GCC 10.
While here, pet portlint.
PR: 246700
|
|
Sat, 22 Aug 2020
|
[ 20:43 pkubaj ]
science/hdf: update to 4.2.15 to fix build on powerpc64
Newest version builds on powerpc64 just fine.
MFH: 2020Q3 (fix build blanket)
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Mon, 22 Apr 2019
|
[ 13:16 gerald ] (Only the first 10 of 225 ports in this commit are shown above. )
Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.
Suggested by: tijl
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Sun, 29 Jul 2018
|
[ 22:18 gerald ] (Only the first 10 of 1480 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
|
|
Sun, 29 Apr 2018
|
[ 08:33 amdmi3 ]
- Switch to new test framework
Approved by: portmgr blanket
|
|
Sat, 10 Mar 2018
|
[ 17:46 gerald ] (Only the first 10 of 1104 ports in this commit are shown above. )
Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).
|
|
Thu, 30 Nov 2017
|
[ 06:43 linimon ]
Also not for armv7. Missed in previous sweep.
|
|
Sun, 10 Sep 2017
|
[ 20:55 gerald ] (Only the first 10 of 1201 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
|
|
Wed, 3 May 2017
|
[ 01:14 linimon ] (Only the first 10 of 11 ports in this commit are shown above. )
Mark some ports failing on aarch64, and, in a few cases, other tier-2
archs.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
|
|
Sat, 1 Apr 2017
|
[ 15:23 gerald ] (Only the first 10 of 1118 ports in this commit are shown above. )
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
|
|
Wed, 7 Dec 2016
|
[ 13:24 gerald ] (Only the first 10 of 227 ports in this commit are shown above. )
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.
The first part covered ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.
PR: 214965
Reported by: thierry
|
|
Thu, 21 Apr 2016
|
[ 16:43 swills ] (Only the first 10 of 419 ports in this commit are shown above. )
many ports: mark broken on powerpc64
|
|
Fri, 1 Apr 2016
|
[ 14:25 mat ] (Only the first 10 of 2099 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 10 Sep 2015
|
[ 16:55 danfe ]
- Unbreak the build on PowerPC by pretending to be pre-Intel Apple CPU;
while this is probably not right design-wise, it allows for a smaller
fix in line count (all regression tests do pass)
- While here, perform usual Makefile maintenance and cleanups: sort the
knobs, wrap overly long lines, and improve `regression-test' target
|
|
Mon, 22 Jun 2015
|
[ 18:33 antoine ] (Only the first 10 of 374 ports in this commit are shown above. )
Convert to USES=jpeg
|
|
Wed, 18 Mar 2015
|
[ 15:33 sunpoet ]
- Use CONFLICTS_INSTALL instead of CONFLICTS
- Add OPTIONS_DEFINE
- Pet portlint
|
[ 15:25 sunpoet ] (Only the first 10 of 12 ports in this commit are shown above. )
- Update to 4.2.11
- Update pkg-descr
Changes: http://www.hdfgroup.org/ftp/HDF/releases/HDF4.2.11/src/hdf-4.2.11-RELEASE.txt
http://www.hdfgroup.org/ftp/HDF/releases/HDF4.2.10/src/hdf-4.2.10-RELEASE.txt
http://www.hdfgroup.org/ftp/HDF/releases/HDF4.2.9/src/hdf-4.2.9-RELEASE.txt
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Tue, 8 Jul 2014
|
[ 14:49 tijl ]
- USES=libtool tar:bzip2
- Add INSTALL_TARGET=install-strip
- Use MAKE_CMD
|
|
Mon, 5 May 2014
|
[ 09:45 bapt ] (Only the first 10 of 293 ports in this commit are shown above. )
Convert all :U to :tu and :L to :tl
Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)
bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore
Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier
With hat: portmgr
|
|
Mon, 10 Mar 2014
|
[ 20:55 gerald ] (Only the first 10 of 1081 ports in this commit are shown above. )
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
|
|
Fri, 27 Dec 2013
|
[ 16:55 tijl ]
New LIB_DEPENDS syntax, USES=fortran, staging.
|
|
Sat, 26 Oct 2013
|
[ 00:52 gerald ] (Only the first 10 of 1147 ports in this commit are shown above. )
Update to libmpc version 1.0.1 which brings the following fixes:
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 20 Sep 2013
|
[ 22:48 bapt ] (Only the first 10 of 185 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
science)
|
|
Wed, 14 Aug 2013
|
[ 22:35 ak ] (Only the first 10 of 1725 ports in this commit are shown above. )
- Remove MAKE_JOBS_SAFE variable
Approved by: portmgr (bdrewery)
|
|
Thu, 20 Dec 2012
|
[ 05:41 araujo ]
- Update to 4.2.8.
- Add MAKE_JOBS_SAFE.
- Trim header.
PR: ports/172052
Submitted by: KATO Tsuguru <tkato432@yahoo.com>
|
|
Sat, 8 Sep 2012
|
[ 07:49 linimon ]
Mark as broken on powerpc.
Hat: portmgr
|
|
Sat, 21 Apr 2012
|
[ 18:07 mi ]
Upgrade from 4.2r3 to 4.2.7 (this neccessitated EPOCH bump).
Unbreak, untangle. Stop fetching/installing documents (other
than man-pages) -- these are available online.
Using standard libtool instead of the bundled one fails -- an
autotools expert should take a closer look.
|
|
Mon, 9 Apr 2012
|
[ 23:51 bapt ] (Only the first 10 of 63 ports in this commit are shown above. )
Mark as deprecated and set expiration to 2012-05-10 for ports that are mark as
broken for more than 6 month
|
|
Fri, 17 Jun 2011
|
[ 15:37 bapt ] (Only the first 10 of 24 ports in this commit are shown above. )
Mark broken some ports with unfetchable distfiles
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Sun, 13 Sep 2009
|
[ 00:08 gerald ] (Only the first 10 of 107 ports in this commit are shown above. )
Bump PORTREVISION for everything that sets USE_FORTRAN=yes which now
implies lang/gcc44 up from lang/gcc43.
Approved by: portmgr
|
|
Fri, 14 Aug 2009
|
[ 08:30 maho ]
make fetchable.
|
|
Wed, 5 Aug 2009
|
[ 18:17 amdmi3 ]
- Mark MAKE_JOBS_UNSAFE, fails with force make jobs
|
|
Sat, 18 Jul 2009
|
[ 11:11 dinoex ] (Only the first 10 of 337 ports in this commit are shown above. )
- update to jpeg7
Tested by: pav on pointyhat
|
|
Thu, 15 Jan 2009
|
[ 22:33 pav ]
- Fix shlib symlink
Reported by: pointyhat
|
|
Wed, 14 Jan 2009
|
[ 15:47 pav ]
- Fix plist
Reported by: pointyhat
|
[ 06:01 maho ]
Bump port revision by the former commit.
|
[ 06:00 maho ]
Support shared lib by tewaking.
Suggested by: pav@
|
|
Tue, 13 Jan 2009
|
[ 05:30 maho ]
Update to 42r3 and unbreak for 7.
Drop maintainership to ports@.
|
|
Sun, 11 Jan 2009
|
[ 23:16 maho ]
Remove CONFIGURE_ENV
Submitted by: gerald@
|
|
Wed, 7 Jan 2009
|
[ 16:34 gerald ] (Only the first 10 of 104 ports in this commit are shown above. )
Bump PORTREVISION due to change of USE_FORTRAN=yes to GCC 4.3.
|
|
Sun, 30 Sep 2007
|
[ 08:08 linimon ]
Mark as broken on gcc 4.2.
|
|
Thu, 12 Jul 2007
|
[ 07:35 maho ]
Now we use USE_FORTRAN=yes to use FORTRAN compiler.
|
|
Wed, 4 Jul 2007
|
[ 07:51 maho ]
Fix build and finally migrated to gfortran42!
Spotted by: linimon
|
|
Mon, 23 Apr 2007
|
[ 01:11 maho ]
Marked as BROKEN [1], and make fetchable [2].
Submitted by: kris [1], fenner [2].
|
|
Tue, 17 Apr 2007
|
[ 00:30 maho ]
* Use gfortran
* portlint.
Build was not verified. It has been known that it doesn't build
with 6.2-RELEASE(?), even without modification, but pointyhat
build cluster. Hope pointyhat builds without errors.
|
|
Thu, 12 Apr 2007
|
[ 00:48 maho ]
Take over.
|
|
Wed, 4 Apr 2007
|
[ 03:31 glewis ]
. Drop maintainership of these ports. Its glaringly obvious that I don't
have time to maintain them since I'm not even keeping up with the ports
that are most important to me.
|
|
Sat, 13 May 2006
|
[ 04:15 edwin ] (Only the first 10 of 275 ports in this commit are shown above. )
Remove USE_REINPLACE from all categories starting with S
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Sun, 10 Apr 2005
|
[ 21:02 kris ]
Now builds on amd64
|
|
Thu, 7 Apr 2005
|
[ 16:59 glewis ]
. Simplify how DISTFILES is constructed, which also makes portlint happy
since it now appears in the correct order.
|
|
Fri, 18 Mar 2005
|
[ 21:20 glewis ]
. Install documentation.
|
|
Thu, 17 Mar 2005
|
[ 19:35 glewis ]
. Add Szip support.
|
[ 19:04 glewis ] (Only the first 10 of 20 ports in this commit are shown above. )
. Update to 4.2r1.
. Convert to using the autoconf build infrastructure that is part of
the distribution rather than rolling our own build infrastructure.
. Take maintainership. [1]
Approved by: mi [1] (previous maintainer)
|
|
Wed, 24 Mar 2004
|
[ 18:55 pav ]
- Add CONFLICTS between math/netcdf and science/hdf, they both install
same binaries.
PR: ports/64646, ports/64647
Submitted by: Kay Lehmann <kay_lehmann@web.de>
|
|
Sat, 6 Mar 2004
|
[ 23:24 kris ]
BROKEN on !i386 and !alpha: Does not compile
|
|
Sun, 29 Feb 2004
|
[ 09:10 eik ]
set CATEGORIES equal to science/hdf5, fixing PKGORIGIN
|
Number of commits found: 68 |
As an Amazon Associate I earn from qualifying purchases.