| non port: science/veusz/Makefile |
|
SVNWeb
|
Number of commits found: 19 |
|
Thu, 30 Nov 2017
|
[ 15:50 mat  ]   (Only the first 10 of 2423 ports in this commit are shown above.  )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 4 Feb 2017
|
[ 13:37 tcberner ] (Only the first 10 of 21 ports in this commit are shown above. )
Switch ports to use USE_PYQT=<foo> instead of using RUN_- and BUILD_DEPENDS
pyqt.mk provides USE_PYQT=<list> to depend on its components. Convert the ports
not yet using it to it.
Reviewed by: rakuco, mat
Approved by: rakuco (mentor)
Differential Revision: https://reviews.freebsd.org/D9261
|
|
Tue, 14 Jun 2016
|
[ 18:18 pi ]
devel/py-qt4-core: change USE_PYQT from sip_build to sip to fix build
for those ports, unbreak:
science/veusz
math/qtiplot
emulators/swine
devel/ninja-ide
PR: 210045
Reported by: antoine
Submitted by: Tobias C.Berner <tcberner@gmail.com> (kde)
|
|
Sat, 4 Jun 2016
|
[ 12:36 antoine ]
Mark BROKEN: fails to configure
File "setup.py", line 33, in <module>
import pyqtdistutils
File "pyqtdistutils.py", line 13, in <module>
import PyQt4.pyqtconfig
File "/usr/local/lib/python2.7/site-packages/PyQt4/pyqtconfig.py", line 22, in
<module>
import sipconfig
ImportError: No module named sipconfig
Reported by: pkg-fallout
|
|
Fri, 1 Apr 2016
|
[ 14:25 mat ] (Only the first 10 of 2099 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight
|
|
Fri, 24 Oct 2014
|
[ 16:50 mva ] (Only the first 10 of 118 ports in this commit are shown above. )
- Convert ports of science/ and security to new USES=python
Approved by: portmgr (implicit)
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Mon, 10 Mar 2014
|
[ 20:55 gerald ] (Only the first 10 of 1081 ports in this commit are shown above. )
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
|
|
Sun, 22 Dec 2013
|
[ 14:33 makc ]
- Update to 1.19.1
- Use autoplist
- Remove NO_STAGE
PR: ports/184371
Approved by: maintainer timeout (3 weeks)
|
|
Sun, 15 Dec 2013
|
[ 16:22 wg ] (Only the first 10 of 64 ports in this commit are shown above. )
Use setuptools for all Python ports.
Setuptools is the preferred method to manage Python distributions after
many changes to the packaging ecosystem over the past couple of years.
Only ports using USE_PYDISTUTILS= yes are affected by this commit, ports using
USE_PYDISTUTILS= easy_install remains the same however this usage is now
deprecated and should be converted to USE_PYDISTUTILS= yes.
Some Python distributions do not work with setuptools out of the box because
they extend the install command from distutils and not setuptools, and
so they need to be patched accordingly.
pip (which leverages setuptools) works around the issue by using eggs, however
we want to get rid of those as well, as support for "flat" installation is (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 26 Oct 2013
|
[ 00:52 gerald ] (Only the first 10 of 1147 ports in this commit are shown above. )
Update to libmpc version 1.0.1 which brings the following fixes:
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 20 Sep 2013
|
[ 22:48 bapt ] (Only the first 10 of 185 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
science)
|
|
Wed, 19 Jun 2013
|
[ 13:53 makc ]
- Update to 1.17.1
- Trim Makefile header
PR: ports/177961
Submitted by: Stas Timokhin (maintainer)
|
|
Sun, 3 Feb 2013
|
[ 18:16 makc ] (Only the first 10 of 58 ports in this commit are shown above. )
Bump PORTREVISON after devel/py-sip and devel/qscintilla2 update.
x11-toolkits/py-qt:
- mark BROKEN: does not build with latest devel/py-sip
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Fri, 25 May 2012
|
[ 01:50 makc ] (Only the first 10 of 57 ports in this commit are shown above. )
Chase PyQT update
|
|
Thu, 21 Jul 2011
|
[ 11:11 makc ]
Update to 1.12
Remove needless deps
Pacify portlint
PR: ports/158760
Approved by: Stas Timokhin (maintainer)
|
|
Fri, 25 Feb 2011
|
[ 00:47 miwi ] (Only the first 10 of 44 ports in this commit are shown above. )
- Move to py25 or above
- While here kick md5 support
|
|
Thu, 6 Jan 2011
|
[ 02:39 wen ]
Veusz is a GUI scientific plotting and graphing package. It
is designed to produce publication-ready Postscript or PDF
output. SVG, EMF and bitmap formats export are also supported.
The program runs under Unix/Linux, Windows or Mac OS X, and
binaries are provided. Data can be read from text, CSV or FITS
files, and data can be manipulated or examined from within the
application.
WWW: http://home.gna.org/veusz/
PR: ports/153686
Submitted by: Stas Timokhin <devel@stasyan.com>
|
Number of commits found: 19 |
As an Amazon Associate I earn from qualifying purchases.