notbugAs an Amazon Associate I earn from qualifying purchases.
Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)
non port: security/antivir-milter/Makefile

Number of commits found: 18

Sat, 2 Sep 2006
[ 21:52 kris ] Original commit 
1.157 net/samba/Makefile
1.59 net/samba/distinfo
1.7 net/samba/files/README.FreeBSD
1.4 net/samba/files/patch-aj
1.14 net/samba/files/patch-ba
1.4 net/samba/files/
1.2 net/samba/files/
1.2 net/samba/files/patch-source::nsswitch::pam_winbind.h
1.2 net/samba/files/patch-source::rpcclient::cmd_reg.c
1.2 net/samba/files/patch-source::smbd::trans2.c

(Only the first 10 of 69 ports in this commit are shown above. View all ports for this commit)
Remove expired ports.
Thu, 3 Aug 2006
[ 09:35 marius ] Original commit 
1.17 security/antivir-milter/Makefile
Mark DEPRECATED, as free license keys are no longer available
since September 2005, with an EXPIRATION_DATE of 2006-08-31,
as all free license keys that still might be in use should
have expired by then.
If anyone is actually using this port with a commercial
license key, feel free to adopt this port. Otherwise this
port will be deleted after the above EXPIRATION_DATE.

Approved by:    netchild
Sat, 13 May 2006
[ 04:15 edwin ] Original commit 
1.10 science/2dhf/Makefile
1.5 science/abinit/Makefile
1.8 science/bblimage/Makefile
1.7 science/cdcl/Makefile
1.11 science/chemtool-devel/Makefile
1.3 science/dcl/Makefile
1.5 science/dft++/Makefile
1.11 science/euler/Makefile
1.37 science/felt/Makefile
1.20 science/gdis/Makefile

(Only the first 10 of 275 ports in this commit are shown above. View all ports for this commit)
Remove USE_REINPLACE from all categories starting with S
Tue, 20 Dec 2005
[ 14:26 marius ] Original commit 
1.15 security/antivir-milter/Makefile
1.11 security/antivir-milter/distinfo
1.1 security/antivir-milter/files/patch-doc::RELEASE_NOTES
1.3 security/antivir-milter/files/patch-script::avupdater
1.9 security/antivir-milter/pkg-plist
- Update to 1.1.2-1 in order to fix fetching. [1]
  According to the changelog beside a OpenBSD-specific fix the only relevant
  change since 1.1.1-9 was:
  o The log file (syslog too) shows the file name (argv[0]) in its logs.

- No longer override FETCH_CMD so the distfiles survey keeps track of this
  port again. Overriding FETCH_CMD became redundant when the name of the
  distfile was changed to be a versioned one.

Prodded by:     stephen <> [1]
Approved by:    netchild
Wed, 28 Sep 2005
[ 15:41 marius ] Original commit 
1.14 security/antivir-milter/Makefile
1.10 security/antivir-milter/distinfo
1.5 security/antivir-milter/files/patch-doc::MANUAL
1.7 security/antivir-milter/files/patch-init::rc.avmilter
1.2 security/antivir-milter/files/patch-pgp::README
1.1 security/antivir-milter/files/patch-script::rc.avmilter
1.5 security/antivir-milter/pkg-descr
1.7 security/antivir-milter/pkg-message
1.8 security/antivir-milter/pkg-plist
- Update to 1.1.1-9. For a list of changes since 1.1.0-7 please see the
  installed ChangeLog.
- Remove the references to the no longer available free license key for
  private use from pkg-descr and pkg-message.

Approved by:    netchild
Tue, 30 Aug 2005
[ 18:24 marius ] Original commit 
1.13 security/antivir-milter/Makefile
Now that misc/compat5x exists use the FreeBSD 5 binary on FreeBSD > 600004
rather than the FreeBSD 4 binary.

Prodded by:     ache
Approved by:    netchild
Sun, 10 Jul 2005
[ 15:04 marius ] Original commit 
1.12 security/antivir-milter/Makefile
1.9 security/antivir-milter/distinfo
1.1 security/antivir-milter/files/
1.4 security/antivir-milter/files/patch-doc::MANUAL
1.4 security/antivir-milter/files/patch-etc::antivir.conf
1.6 security/antivir-milter/files/patch-init::rc.avmilter
1.2 security/antivir-milter/files/patch-script::avupdater
1.4 security/antivir-milter/pkg-descr
1.6 security/antivir-milter/pkg-message
1.7 security/antivir-milter/pkg-plist
- Update to 1.1.0-7 in order to fix fetching. For a list of changes see
  the installed ChangeLog.
- Silencing the 'cannot access config file "/etc/antivir.conf"' warnings
  by creating a respective symlink.

- AntiVir Milter 1.1.0-7 ships with a faulty anti-virus engine which
  may just exit with the following error when trying to start it:
  cannot access config file "/etc/avguard.conf"
  Please update to the latest anti-virus engine by e.g. running the
  antivirupdater script in order to solve this.
- The future of the free licenses for private use and thus of this
  port currently is uncertain:
  PersonalEdition Classic UNIX: Advance Notice
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Sat, 11 Dec 2004
[ 21:28 marius ] Original commit 
1.11 security/antivir-milter/Makefile
1.8 security/antivir-milter/distinfo
1.3 security/antivir-milter/files/patch-doc::MANUAL
1.5 security/antivir-milter/files/patch-etc::avmilter.conf
1.5 security/antivir-milter/files/patch-init::rc.avmilter
1.5 security/antivir-milter/files/patch-script::avq
1.1 security/antivir-milter/files/patch-script::avupdater
1.5 security/antivir-milter/pkg-message
1.6 security/antivir-milter/pkg-plist
Update to 1.1.0-3 which amongst several fixes and some minor new features
brings native binaries for FreeBSD/i386 5-STABLE. For a complete list of
changes since 1.1 please see the installed ChangeLog.

Approved by:    netchild
Wed, 20 Oct 2004
[ 18:22 marius ] Original commit 
1.10 security/antivir-milter/Makefile
1.7 security/antivir-milter/distinfo
1.2 security/antivir-milter/files/patch-doc::MANUAL
1.4 security/antivir-milter/files/patch-etc::avmilter.conf
1.4 security/antivir-milter/files/patch-init::rc.avmilter
1.1 security/antivir-milter/files/patch-pgp::README
1.4 security/antivir-milter/files/patch-script::avq
1.3 security/antivir-milter/pkg-descr
1.5 security/antivir-milter/pkg-plist
- Update to 1.1 (final). For changes since 1.1-beta see the ChangeLog
  in the DOCSDIR.
- Rename the start script from to to be
  consistent with naming of the rest of the installed AntiVir Milter
  files and directories.
- Now that AntiVir Milter supports using a different location from
  /etc for the ignore, scan and warn config files no longer install
  them in the EXAMPLESDIR but in PREFIX/etc/avmilter (i.e. install
  as sample files, copy over when not already existent, etc.).
- Change the location of the AntiVir Milter config file (avmilter.conf)
  but not that of the scan engine (antivir.conf; shared between different
  AntiVir products) from PREFIX/etc to PREFIX/etc/avmilter in order to
  have all AntiVir Milter config files in one place but don't directly
  populate PREFIX/etc with them.

If you had previously changed PREFIX/etc/avmilter.conf you have to
bring over your changes to PREFIX/etc/avmilter/avmilter.conf but note
that some variables have been renamed. If you used ignore, scan and/or
warn files in /etc you can now move them to PREFIX/etc/avmilter.

Approved by:    netchild
Tue, 20 Apr 2004
[ 13:49 netchild ] Original commit 
1.9 ftp/ftp-tls/Makefile
1.5 ftp/ftpd-tls/Makefile
1.9 security/antivir-milter/Makefile
1.120 security/ssh2/Makefile
1.2 sysutils/afbinit/Makefile
1.44 sysutils/cdrdao/Makefile
1.59 sysutils/cdrtools-devel/Makefile
1.54 sysutils/cdrtools/Makefile
1.7 sysutils/sformat/Makefile
Use the address of the maintainer.

Approved by:    marius
Mon, 12 Apr 2004
[ 12:53 netchild ] Original commit 
1.8 security/antivir-milter/Makefile
1.6 security/antivir-milter/distinfo
1.3 security/antivir-milter/files/patch-etc::antivir.conf
- H+BEDV GmbH released a new tarball of the beta version shipping an updated
  anti-virus engine ( ->, current virus definition file
  ( -> and an updated antivir.conf.
  If you are using the auto-update facility you should already have the
  updated AV engine binary and VDF.
- Look for the libmilter of the Sendmail port and the GnuPG binary in
  LOCALBASE instead of PREFIX.

Submitted by:   Marius Strobl <>
Mon, 8 Mar 2004
[ 08:03 netchild ] Original commit 
1.7 security/antivir-milter/Makefile
1.3 security/antivir-milter/files/
1.1 security/antivir-milter/files/
1.3 security/antivir-milter/files/patch-etc::avmilter.conf
1.3 security/antivir-milter/files/patch-init::rc.avmilter
1.3 security/antivir-milter/files/patch-script::avq
1.4 security/antivir-milter/pkg-plist
- Use daemon(8) for launching avmilter in order to detach it from the
  controlling terminal. [1]
- Make the avq script check if it's ran by the avmilter user in addition
  to uid == 0. This enables `avq --remove` to be run via a script and the
  ExternalProgram option in order to automatically delete the rejected
  messages. [2]
- Install a script avqrm which serves this purpose, i.e. executes
  `avq --remove` and can be run via ExternalProgram.
- Make the avq script not print the contents of the queue when option
  '--remove' is given, this greatly improves speed and otherwise it's not
  really suitable to be called on every rejected message. Fix some typos.
- Fix pkg-plist by adding antivirupdater.

Requested by:   ache [1], [2]
Submitted by:   maintainer
Fri, 5 Mar 2004
[ 15:08 netchild ] Original commit 
1.6 security/antivir-milter/Makefile
1.5 security/antivir-milter/distinfo
1.1 security/antivir-milter/files/patch-doc::MANUAL
1.2 security/antivir-milter/files/patch-etc::antivir.conf
1.2 security/antivir-milter/files/patch-etc::avmilter.conf
1.2 security/antivir-milter/files/patch-init::rc.avmilter
1.4 security/antivir-milter/pkg-message
1.3 security/antivir-milter/pkg-plist
HEADS-UP: When updating from a previous version you have to do the following
          after deinstalling the old port:
          # rm PREFIX/AntiVir/antivir
          # rm PREFIX/AntiVir/antivir.vdf
          # chown root:wheel PREFIX/AntiVir
          # chown root:smmsp PREFIX/AntiVir/hbedv.key
          In your SENDMAIL_MC change
            `S=unix:PREFIX/AntiVir/avmilter.sock, F=T, T=S:10m;R:10m;E:5m'
            `S=unix:/var/spool/avmilter/avmilter.sock, F=T, T=S:10m;R:10m;E:10m'
          and rebuild
          If /var/spool/avmilter exist you have to:
          # chown -R smmsp:smmsp /var/spool/avmilter
          If you are using a customized PREFIX/etc/avmilter.conf the port
          won't remove it on deinstall and you have to manually change User
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Fri, 20 Feb 2004
[ 16:48 netchild ] Original commit 
1.5 security/antivir-milter/Makefile
1.4 security/antivir-milter/distinfo
1.2 security/antivir-milter/pkg-plist
- H+BEDV GmbH released a new tarball shipping an updated anti-virus engine
  ( ->, current virus definition file ( ->
  and an updated antivir.conf adding the new option "UpdaterKeepsBackups" for
  for the current AV engine.
  If you are using the auto-update facility you should already have the
  updated AV engine binary and VDF.
- Install the original AV engine binary and the VDF from the tarball with
  suffix "-dist_avfbmlt" instead of "-dist" so ${PREFIX}/AntiVir/antivir
  can be shared between different H+BEDV AntiVir products without conflicts.
- Add another instance to MASTER_SITES.

Submitted by:   marius
Wed, 10 Dec 2003
[ 17:57 netchild ] Original commit 
1.4 security/antivir-milter/Makefile
1.3 security/antivir-milter/distinfo
1.1 security/antivir-milter/files/patch-etc::antivir.conf
1.2 security/antivir-milter/files/patch-script::avq
- H+BEDV GmbH released a new tarball shipping an updated anti-virus engine
  ( ->, a current virus definition file ( and
  and updated antivir.conf adding new options for the new features in the
  current AV engine.
  If you are using the auto-update facility you should already have the
  updated AV engine and VDF. The new options available in antivir.conf are
  only relevant if you are using the update daemon mechanism (i.e. you are
  using `antivir --update-daemon` instead of running antivirupdater via
  cron(8)) or you own a true commercial license (i.e. no private license)
  and want to catch "unwanted files" e.g. dialers in addition to worms and
- Be consistent in how PREFIX gets inserted in the avq script compared to
  the other patched files. The old way previously saved a patch which is
  no longer true. No change in the installed script.

Submitted by:   Marius Strobl <>
Mon, 17 Nov 2003
[ 10:15 netchild ] Original commit 
1.3 security/antivir-milter/Makefile
1.3 security/antivir-milter/pkg-message
- Install the virus definition file and the actual virus scanner with the
  write bit turned on as both get updated when using the automated updates
  facility. The auto-update mechanism doesn't seem to have a problem if
  the write bit is disabled but it's not quite correct.
- Mention in pkg-message that that the virus scanner (referenced as
  "anti-virus engine" by H+BEDV) also gets updated when using the automated
  updates facility.
Tue, 14 Oct 2003
[ 16:04 netchild ] Original commit 
1.2 security/antivir-milter/Makefile
1.2 security/antivir-milter/distinfo
1.2 security/antivir-milter/files/
1.1 security/antivir-milter/files/patch-script::avq
1.2 security/antivir-milter/pkg-descr
1.2 security/antivir-milter/pkg-message
- H+BEDV GmbH released a new tarball shipping an updated anti-virus engine
  ( -> and a current virus definition file (
  If you are using the auto-update functionality you should already have
  these updated versions.
- Mention the AntiVir Bulletin Board (support) in the DESCR.
- Make the antivirupdater script behave like described in the documentation
  (pass command line arguments to antivir).
- Make the avq script check for uid == 0, the avmilter spool directory can't
  be read without sufficient permissions.

Submitted by:   maintainer
Wed, 24 Sep 2003
[ 13:47 netchild ] Original commit 
1.439 security/Makefile
1.1 security/antivir-milter/Makefile
1.1 security/antivir-milter/distinfo
1.1 security/antivir-milter/files/
1.1 security/antivir-milter/files/patch-etc::avmilter.conf
1.1 security/antivir-milter/files/patch-init::rc.avmilter
1.1 security/antivir-milter/pkg-descr
1.1 security/antivir-milter/pkg-message
1.1 security/antivir-milter/pkg-plist
Add AntiVir Milter, a mail virusscanner using the Sendmail Mail Filter API.
This is a commercial stand-alone solution written in C not a PERL script +
myriads of dependencies + some AV...
Licenses for private (individual, non-commercial) use, e.g. for protecting
your family's home network, can be applied for free of charge.

Submitted by:   Marius Strobl <>

Number of commits found: 18

User Login
Create account

Servers and bandwidth provided by
New York Internet, iXsystems, and RootBSD

This site
What is FreshPorts?
About the authors
How big is it?
The latest upgrade!

Enter Keywords:

Latest Vulnerabilities
gcpioNov 15
libmadNov 13
chromiumNov 12
wordpressNov 12
wordpressNov 12
wordpressNov 12
wordpressNov 12
wordpressNov 12
nexus2-ossNov 07
php71Nov 06
php72Nov 06
php73Nov 06
php74Nov 06
fileNov 02
mariadb101-serverNov 02

8 vulnerabilities affecting 170 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities

Last updated:
2019-11-15 22:48:54

Deleted ports
Sanity Test Failures

NEW Graphs (Javascript)

Calculated hourly:
Port count 38065
Broken 786
Deprecated 87
Ignore 1065
Forbidden 3
Restricted 156
Vulnerable 33
Expired 7
Set to expire 57
Interactive 0
new 24 hours 4
new 48 hours10
new 7 days38
new fortnight63
new month120

Servers and bandwidth provided by
New York Internet, iXsystems, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2019 Dan Langille. All rights reserved.