| non port: security/libident/Makefile |
|
SVNWeb
|
Number of commits found: 28 |
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner)  ]    857c05f (Only the first 10 of 840 ports in this commit are shown above.  )
security: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Dupre <ale@FreeBSD.org>
* Alex Kapranoff <kappa@rambler-co.ru>
* Alex Samorukov <samm@freebsd.org>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kriventsov <avk@vl.ru>
* Alexander Leidinger <netchild@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Mon, 18 Jul 2016
|
[ 09:00 amdmi3 ]  
- Switch to options helpers
|
|
Thu, 5 Jun 2014
|
[ 18:07 amdmi3 ]
- Drop .la files, no dependees require them
|
|
Wed, 23 Apr 2014
|
[ 13:25 tijl ] (Only the first 10 of 462 ports in this commit are shown above. )
When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
(Only the first 15 lines of the commit message are shown above )
|
|
Mon, 7 Apr 2014
|
[ 15:51 bapt ]
Support stage
USES=libtool
strip binaries
|
|
Fri, 20 Sep 2013
|
[ 22:55 bapt ] (Only the first 10 of 1016 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
security)
|
|
Fri, 29 Mar 2013
|
[ 19:33 cs ] (Only the first 10 of 94 ports in this commit are shown above. )
- Remove A/An in COMMENT
- Trim Header where applicable
|
|
Thu, 11 Aug 2011
|
[ 19:20 kwm ] (Only the first 10 of 543 ports in this commit are shown above. )
Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.
PR: ports/159624
Submitted by: Ruslan Mahmatkhanov <cvs-src@yandex.ru>
|
|
Fri, 17 Jun 2011
|
[ 05:50 bapt ]
Distfile is back remove deprecation
|
|
Sun, 13 Mar 2011
|
[ 21:30 bapt ] (Only the first 10 of 26 ports in this commit are shown above. )
Deprecate unmaintained ports from security where upstream disapear and/or
where no distfiles can be found and are not used by maintained ports
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Thu, 1 Feb 2007
|
[ 02:42 kris ] (Only the first 10 of 348 ports in this commit are shown above. )
Use libtool port instead of included version to avoid objformat a.out botch
|
|
Sun, 5 Nov 2006
|
[ 07:59 lawrance ]
Update master site and add WWW.
PR: ports/104257
Submitted by: Josh Paetzel <josh@tcbug.org>
|
|
Tue, 15 Aug 2006
|
[ 01:04 clsung ] (Only the first 10 of 49 ports in this commit are shown above. )
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include security/ sysutils/ textproc/ maintained by ports@
PR: ports/101916
Submitted by: Gea-Suan Lin <gslin_AT_gslin dot org>
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Sun, 10 Jul 2005
|
[ 18:42 kris ]
Chase master site
|
|
Fri, 3 Jun 2005
|
[ 20:18 oliver ] (Only the first 10 of 67 ports in this commit are shown above. )
change the libtool version to use from 1.3 to 1.5
|
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Fri, 23 Jan 2004
|
[ 15:20 krion ]
- Update to version 0.32
PR: ports/61784
Submitted by: Ports Fury
|
|
Fri, 22 Aug 2003
|
[ 09:42 krion ]
- Update to 0.31
|
|
Thu, 20 Feb 2003
|
[ 18:59 knu ] (Only the first 10 of 146 ports in this commit are shown above. )
De-pkg-comment.
|
|
Tue, 15 Jan 2002
|
[ 03:04 pat ]
Fix mastersites
|
|
Mon, 17 Sep 2001
|
[ 18:40 dwcjr ] (Only the first 10 of 41 ports in this commit are shown above. )
Remove jseger and torstenb from maintainership of their ports, they have been
inactive for too long
|
|
Fri, 2 Jun 2000
|
[ 04:18 will ] (Only the first 10 of 26 ports in this commit are shown above. )
Remove redundant/inappropriate CATEGORIES. People need to start reading the
Porter's Handbook. :-)
|
Number of commits found: 28 |
As an Amazon Associate I earn from qualifying purchases.