non port: security/p5-Crypt-Lite/Makefile |
SVNWeb
|
Number of commits found: 19 |
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:22 Tobias C. Berner (tcberner) ] 857c05f (Only the first 10 of 840 ports in this commit are shown above. )
security: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Dupre <ale@FreeBSD.org>
* Alex Kapranoff <kappa@rambler-co.ru>
* Alex Samorukov <samm@freebsd.org>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kriventsov <avk@vl.ru>
* Alexander Leidinger <netchild@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Sun, 10 Feb 2019
|
[ 00:07 sunpoet ]
Remove Perl core module
- While I'm here, add LICNESE
- Bump PORTREVISION for dependency change
With hat: perl
|
Sat, 6 Oct 2018
|
[ 13:06 des ] (Only the first 10 of 2492 ports in this commit are shown above. )
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw)
|
Fri, 1 Apr 2016
|
[ 14:25 mat ] (Only the first 10 of 2099 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight
|
Wed, 26 Nov 2014
|
[ 13:08 mat ] (Only the first 10 of 10077 ports in this commit are shown above. )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above )
|
Thu, 30 Jan 2014
|
[ 09:42 az ] (Only the first 10 of 109 ports in this commit are shown above. )
- add stage support
Approved by: portmgr (blanket infrastructure)
|
Fri, 20 Sep 2013
|
[ 22:55 bapt ] (Only the first 10 of 1016 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
security)
|
Wed, 11 Sep 2013
|
[ 17:56 az ] (Only the first 10 of 38 ports in this commit are shown above. )
- convert to the new perl5 framework
- trim Makefile header
Approved by: portmgr (bapt@, blanket)
|
Fri, 29 Jun 2012
|
[ 10:20 az ]
- Remove SITE_PERL from *_DEPENDS
Approved by: portmgr@ (bapt@)
|
Mon, 14 Jun 2010
|
[ 12:56 ashish ] (Only the first 10 of 31 ports in this commit are shown above. )
- Adopt unmaintained ports.
Approved by: pgj, tabthorpe (mentors)
|
Tue, 8 Jun 2010
|
[ 07:31 gabor ] (Only the first 10 of 36 ports in this commit are shown above. )
- Drop maintainership
|
Thu, 17 Apr 2008
|
[ 14:30 araujo ] (Only the first 10 of 2168 ports in this commit are shown above. )
- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.
PR: ports/122674
Submitted by: Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by: araujo (myself)
Approved by: portmgr (pav)
|
Sat, 31 Mar 2007
|
[ 20:33 gabor ] (Only the first 10 of 27 ports in this commit are shown above. )
- Remove support for old Perl from my ports
|
Fri, 8 Dec 2006
|
[ 13:46 gabor ] (Only the first 10 of 69 ports in this commit are shown above. )
Change my e-mail address.
Approved by: erwin (mentor)
|
Mon, 25 Sep 2006
|
[ 16:04 erwin ]
Update to 0.82.11
PR: 103513
Submitted by: gabor (maintainer)
Based on: 103360 submitted by Gea-Suan Lin <gslin@gslin.org>
|
Fri, 30 Dec 2005
|
[ 20:35 leeym ]
- remove IGNORE on old perl
- update dependency
- bump PORTREVISION
Submitted by: leeym
Approved by: maintainer via email
|
Sun, 18 Dec 2005
|
[ 22:06 erwin ]
Sometimes it's necessary to protect some certain data against plain reading
or you intend to send information through the Internet. Another reason might
be to assure users cannot modify their previously entered data in a follow-up
step of a long Web transaction where you don't want to deal with server-side
session data. The goal of Crypt::Lite was to have a pretty simple way to
encrypt and decrypt data without the need to install and compile huge
packages with lots of dependencies.
Crypt::Lite generates every time a different encrypted hash when you
re-encrypt the same data with the same secret string. Nevertheless you
are able to make double or tripple-encryption with any data to increase
the security. Decryption works also on hashes that have been encrypted
on a foreign host (try this with an unpatched IDEA installation ;-).
WWW: http://search.cpan.org/dist/Crypt-Lite
PR: ports/90614
Submitted by: Gabor Kovesdan
|
Number of commits found: 19 |