| non port: sysutils/clockspeed/Makefile |
|
SVNWeb
|
Number of commits found: 35 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:23 Tobias C. Berner (tcberner) ] ea71236 (Only the first 10 of 972 ports in this commit are shown above. )
sysutils: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <jsmith@resonatingmedia.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Landwehr <aaron@snaphat.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Adrian Chadd
* Adrian Chadd <adrian@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan Eldridge <alane@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Deiter <alex.deiter@gmail.com> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sun, 28 May 2017
|
[ 21:18 antoine ]   (Only the first 10 of 12 ports in this commit are shown above. )
Register dependency on groff
PR: 213725
|
|
Mon, 18 Jul 2016
|
[ 16:41 mat ] (Only the first 10 of 29 ports in this commit are shown above. )
Don't echo in post-install, use pkg-message. Also, don't "fix"
pkg-message in post-install, use SUB_FILES/SUB_LIST.
Sponsored by: Absolight
|
|
Fri, 1 Apr 2016
|
[ 14:25 mat ] (Only the first 10 of 2099 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 3 Sep 2015
|
[ 13:11 amdmi3 ]
- Add missing OPTIONS_DEFINE=DOCS
- Fix installation commands
- Switch to options helpers
|
|
Tue, 29 Jul 2014
|
[ 14:12 feld ]
Support STAGE
I don't use this software but I'm sure someone out there does.
|
|
Mon, 14 Jul 2014
|
[ 18:42 bapt ] (Only the first 10 of 280 ports in this commit are shown above. )
Modernize LIB_DEPENDS
With hat: portmgr
|
|
Sun, 6 Jul 2014
|
[ 15:52 bapt ] (Only the first 10 of 47 ports in this commit are shown above. )
Resetting maintainership on ports that have not been staged and without any
pending PR (related to stage)
With hat: portmgr
|
|
Fri, 20 Sep 2013
|
[ 23:06 bapt ] (Only the first 10 of 1053 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
sysutils)
|
|
Sun, 27 Jul 2008
|
[ 22:14 lx ]
And bump portrevision.
|
|
Sat, 26 Jul 2008
|
[ 21:11 lx ]
Update leapsecs.dat to be the most current from
http://cr.yp.to/libtai.html. Do not use the one
installed by devel/libtai.
Submitted by: clemens fischer
|
|
Mon, 16 Jun 2008
|
[ 02:29 lx ]
Take maintainership.
|
[ 01:25 lioux ]
Drop maintainership.
|
|
Thu, 22 Mar 2007
|
[ 17:02 rafan ]
- Move stuffs that are after post.mk to appropriate places
- Use DOCSDIR
PR: ports/109335
Submitted by: rafan
Approved by: maintainer timeout (1 month)
|
|
Sat, 13 May 2006
|
[ 04:15 edwin ] (Only the first 10 of 275 ports in this commit are shown above. )
Remove USE_REINPLACE from all categories starting with S
|
|
Fri, 23 Dec 2005
|
[ 20:23 lioux ]
o Update the leap seconds table according to
http://hpiers.obspm.fr/eoppc/bul/bulc/bulletinc.dat. There is a
leap seconds at the end of 2005.
o Obtain the fresh and updated leap seconds table from devel/libtai
port.
o Bump PORTREVISION
PR: 89948
Submitted by: Frank W. Josellis <frank@dynamical-systems.org>,
markzero <mark@darklogik.org>
Obtained from: http://hpiers.obspm.fr/eoppc/bul/bulc/bulletinc.dat
|
|
Sat, 25 Dec 2004
|
[ 11:43 lioux ] (Only the first 10 of 66 ports in this commit are shown above. )
Remove deprecated USE_SIZE
|
|
Sun, 8 Feb 2004
|
[ 01:14 lioux ] (Only the first 10 of 224 ports in this commit are shown above. )
USE_SIZEify
|
|
Sun, 23 Feb 2003
|
[ 19:58 lioux ] (Only the first 10 of 265 ports in this commit are shown above. )
De-pkg-comment
|
|
Fri, 7 Feb 2003
|
[ 15:43 lioux ]
Sanitize MASTER_SITES
Submitted by: fenner's distfiles survey
|
|
Thu, 2 Jan 2003
|
[ 05:46 lioux ]
o Remove ONLY_FOR_ARCHS limitation by adding timing support other
than RDTSC registers from Pentium. After a reminder by Garrett
Wollman <wollman@FreeBSD.org> [1] that FreeBSD has a gethrtime()
similar function, added experimental support for FreeBSD
clock_gettime(2) which should work in all FreeBSD supported ARCHes
o Add notes in both DESCR and PKGMESSAGE that there might be precision
differences since this is experimental code
Reviewed by: portmgr (silence/no objections)
Submitted by: wollman [1]
|
|
Wed, 18 Dec 2002
|
[ 18:45 lioux ]
Mark as ONLY_FOR_ARCHS i386 since it requires either a pentium
hardware tick counter or an equivalent Solaris gethrtime() syscall.
This should be investigated further. FreeBSD might have an equivalent
syscall.
Submitted by: bento
|
|
Mon, 4 Nov 2002
|
[ 22:57 edwin ] (Only the first 10 of 20 ports in this commit are shown above. )
Half of these ones missed yesterday while converting to USE_REINPLACE.
The other half needs perl to build.
Noticed on bento and others (full mailbox :-)
|
|
Fri, 20 Sep 2002
|
[ 14:38 lioux ] (Only the first 10 of 12 ports in this commit are shown above. )
Sanitize MASTER_SITES
Submitted by: fenner's distfile survey
|
|
Mon, 8 Jul 2002
|
[ 01:34 lioux ]
Sanitize MASTER_SITES
|
|
Tue, 29 Jan 2002
|
[ 11:58 knu ] (Only the first 10 of 43 ports in this commit are shown above. )
Use ${ECHO_CMD} instead of ${ECHO} where you mean the echo command; the ECHO
macro is set to "echo" by default, but it is set to "true" if make(1) is
invoked with the -s option while ECHO_CMD is always set to the echo command.
|
|
Fri, 25 May 2001
|
[ 15:58 lioux ]
1) Install leapsecs.dat (leapseconds support) 2) Add PKGMESSAGE with
additional FreeBSD specific installation information 3) Install sample
startup script 4) Bump PORTREVISION due to (1)
|
|
Thu, 22 Feb 2001
|
[ 17:22 lioux ]
Add new MASTER_SITES
|
|
Tue, 16 Jan 2001
|
[ 19:08 will ] (Only the first 10 of 28 ports in this commit are shown above. )
Update to sync with bsd.port.mk rev 1.361 - use PORTDOCS that is now in
bsd.port.mk, for easy removal of documentation. I left alone one port -
japanese/elisa8x8 (or something like that), because it appeared to have some
rather weird way of doing PORTDOCS substitution.
|
[ 17:33 sobomax ] (Only the first 10 of 365 ports in this commit are shown above. )
Massive style enforcement - use ^I instead of spaces for variables identation.
|
|
Mon, 20 Nov 2000
|
[ 14:48 lioux ]
Submitted by: sobomax
|
|
Tue, 3 Oct 2000
|
[ 06:12 lioux ] (Only the first 10 of 29 ports in this commit are shown above. )
Maintainer is now a committer, update email accordingly
|
|
Fri, 7 Jul 2000
|
[ 15:30 sobomax ]
Add clockspeed - a program which uses a hardware tick counter to compensate
for a persistently fast or slow system clock. It also could be used to
synchronize time across LAN or WAN.
|
Number of commits found: 35 |
As an Amazon Associate I earn from qualifying purchases.