Current status

Number of commits found XX: 41

sysutils/ganglia-webfrontend: Fix known display bug in cluster view

This is an emergency fix for a serious bug that wrecks the main page.
I will upgrade to 3.7.4 after working out different issues with that release.

Approved by:    jrm (mentor)
Differential Revision:  https://reviews.freebsd.org/D17264

sysutils/ganglia-webfrontend: fix RUN_DEPENDS, minor changes to satisfy
portlint, and release maintainership

Update email address to jrm@FreeBSD.org for ports that I maintain

Reviewed by:	mat, swills (mentor)
Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D7995

Require the php session extension and switch to USE_GITHUB.

PR:		211763
Submitted by:	Joseph Mingrone <jrm@ftfl.ca> (maintainer)
Approved by:	bdrewery (implicit)

Update sysutils/ganglia-webfrontend from 3.7.1 to 3.7.2

PR:		210308
Submitted by:	Joseph Mingrone <jrm@ftfl.ca>
Approved by:	bdrewery (implicit)

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

sysutils/ganglia-webfrontend: security update 3.7.0 -> 3.7.1

PR:		202940
Submitted by:	Joseph Mingrone <jrm@ftfl.ca> (maintainer)
Security:	d68df01b-564e-11e5-9ad8-14dae9d210b8
Security:	CVE-2015-6816
MFH:		2015Q4

Fix file permissions so WWWDIR is not writable by WWWOWN
Improve pkg-message notes on setting up Apache and Nginx

PR:	201908

Resurrect sysutils/ganglia-webfrontend
- Update to upstream version 3.7.0
- Joseph Mingrone <jrm@ftfl.ca> takes maintainership
- Stagify
- Add LICENSE
- General port modernisation

PR:		200278
Submitted by:	jrm@ftfl.ca (maintainer)
Reviewed by:	koobs

Resetting maintainership on ports that have not been staged and without any
pending PR (related to stage)

With hat:	portmgr

Add NO_STAGE all over the place in preparation for the staging support (cat:
sysutils)

Steven has graciously agreed to take over the Ganglia ports.

Fix an utterly botched attempt to convert @unexec rmdir to @dirrmtry.

Reported by:    erwin, pav

Fix the bogus LIB_DEPENDS in port by taking an axe to configure.in and
adding the use of autoconf.  Since we don't actually need the libraries,
there's no need to check for them.

In addition to arp-1, we need libconfuse and libpcre about to build.
Because gmetad is a RUN_DEPEND and requires them, abuse LIB_DEPEND here
even though these are technically build depends.

Reported by:    pav

Fix fetching now that the version naming nonsense is gone.

PR:             157199, 157219
Submitted by:   Michael Fuckner, ohauer

Upgrade to ganglia-3.1.7

- Prep for USE_APR, make it always a LIB_DEPENDS

PR:             ports/146950
Submitted by:   myself (pgollucci)
Approved by:    maintainer timeout (philip ; > 2.5 months)
With Hat:       apache@

- Chase devel/apr -> devel/apr1 shuffling

PR:             ports/146553
Submitted by:   myself (pgollucci@)
With Hat:       apache@

- Convert ports/ to devel/apr1

PR:             ports/146553
Submitted by:   myself (pgollucci@)
With Hat:       apache@

4/5: Chase devel/apr shlib bump

PR:             ports/146130
Approved by:    portmgr (pav)
Tested by:      -exp run (pav)
With Hat:       apache@

- Switch SourceForge ports to the new File Release System: categories starting
with P,R,S

Add missing run dependency on apr.

Reported by:    pointyhat (via pav)

Upgrade Ganglia to 3.1.1 plus a fix for CVE-2009-0241.

PR:             ports/129822, ports/131067
Submitted by:   Mark Foster <mark at foster dot cc> (vuxml)
Security:       vid:b9077cc4-6d04-4bcb-a37a-9ceaebfdcc9e

- Chase rrdtool 1.3.0 update, bump PORTREVISION

PR:             ports/124749
Submitted by:   Zhen REN <bg1tpt at gmail.com> (maintainer of rrdtool)

Add ctype to the list of needed PHP modules.[1]
Don't bogusly install version.php.in.[2]

Reported by:    Michael Fuckner <michael at fuckner dot net>[1]
                pointyhat (via pav, erwin)

Run configure to generate a version.php file rather than maintaining our
own copy that I alwasy forget to update.  This fixes the incorrect version
appearing on webpages.

Reported by:    Michael Fuckner <michael at fuckner dot net>
PR:             ports/119110

Upgrade to Ganglia 3.0.6.

Release 3.0.5 contained minor bug fixes.  3.0.6 corrects XSS
vulnerabilities in the webfrontend.

Security:        vid:fee7e059-acec-11dc-807f-001b246e4fdf

- Upgrade to ganglia 3.0.4

PR:             ports/115363
Submitted by:   Michael Fuckner <michael at fuckner dot net>

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- WWWOWN and WWWGRP are defined in bsd.port.mk

Remove USE_REINPLACE from all categories starting with S

- Fix the plist so the config file gets removed when unchanged.
- Switch to using dirrmtry to from "unexec rmdir" remove the directory.

Approved by:    portmgr (marcus)

Populate the node list dropdown on the cluster view page when the user
has turned off show hosts.  It's nice not to have to load 190+ images
just so I can select a host from the dropdown.

Do some general cleanup of the port infrastructure.
 - Install into a staging directory in the build target and install
   that.
 - Add a target to generate the plist from the staging directory
   rather than doing it by hand.
 - Use a pkg-install script to copy conf.php.sample to conf.php as
   needed instead of some bits in the make file and different ones
   in the plist.
 - Use SUB_FILES to handle pkg-message rather than hand-rolled sed.

Upgrade to 3.0.1 (mostly just includes fixes we previously installed
via patches).

Submitted by:   Michael Fuckner <michael at fuckner dot net>
PR:             ports/79770

Upgrade to 3.0.0.  The only major change is that the webfrontend is now
distributed as part of the main tarball.

Add missing pcre and xml depends.

Use the new PHP infrastructure to depend on php-gd.  Get rid of warning
about installing PHP with GD since this is now automatic.

Update to 2.5.5 (no major changes from 2.5.4).

Major changes to the port infrastructure:
 - Replace WWWDOCROOT and WEBFRONTURL options with WEBFRONTDIR
   (defaults to www/ganglia).
 - Install files under ${PREFIX}/${WEBFRONTDIR}.
 - Since the files are no longer installed in the document root,
   add a pkg-message with a suggest addition to Apache's
   httpd.conf.
 - Use USE_PHP and WANT_PHP_MOD.
 - Add a note about installing PHP with GD support at done in
   mail/nocc.
 - Remove conf.php only if it is identical to conf.php.sample as
   done in mail/nocc.
 - Sizify.
 - Don't install the empty addons directory since packages won't
   contain it.

PR:             ports/62802
Submitted by:   Brooks Davis <brooks@FreeBSD.org> (maintainer)

Upgrade to Ganglia Web Frontend 2.5.4.  PR ports/58658 (maintainer-update).

new port: sysutils/ganglia-webfrontend: GUI for the ganglia cluster monitor

        The Ganglia cluster monitoring system is an easy to install
        and configure cluster monitor.  The ganglia-webfrontend
        port is a port of the web-based GUI.  This port depends on
        the ganglia-monitor-core port which is in PR ports/48551.

PR:             ports/48552
Submitted by:   Brooks Davis <brooks@freebsd.org>

Number of commits found XX: 41

10 vulnerabilities affecting 79 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2021-03-05 21:21:29