15:29 Baptiste Daroussin (bapt) 

MAN?PREFIX: eleminate its usage  and move man to share/man

    e4610fc

10:03 Rodrigo Osorio (rodrigo) 

*/*: Update WWW to use HTTPS for sourceforge.net projects

Homepage link is permanent redirected to its HTTPS counterpart
Issue reported by repology : https://repology.org/repository/freebsd/problems

Approved by:	portmgr (blanket)
PR:		274888

    06df180

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:23 Tobias C. Berner (tcberner) 

sysutils: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <jsmith@resonatingmedia.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Landwehr <aaron@snaphat.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Adrian Chadd
  *  Adrian Chadd <adrian@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@FreeBSD.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Deiter <alex.deiter@gmail.com>
  *  Alex Deiter <tiamat@komi.mts.ru>
  *  Alex Samorukov <samm@freebsd.org>
  *  Alex de Kruijff
  *  Alexander Haderer <alexander.haderer@loescap.de>
  *  Alexander Kuehn <freebsd@nagilum.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Moisseev <moiseev@mezonplus.ru>
  *  Alexander V. Chernikov <melifaro@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@regency.nsu.ru>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Anders Nordby <anders@fix.no>
  *  Andreas Dobloug <andreasd@@ifi.uio.no>
  *  Andreas Fehlner (fehlner@gmx.de)
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrej Zverev <az@inec.ru>
  *  Andrew <andrew@ugh.net.au>, Iain Templeton <iain@ugh.net.au>
  *  Andrew Khlebutin <andrey@hm.perm.ru>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrew Shevtsov <nyxo@dnuc.polyn.kiae.su>
  *  Andrew Stevenson <andrew@ugh.net.au>
  *  Andrew Turner <zombie@i4free.co.nz>
  *  Andrey A. Chernov <ache@FreeBSD.org>
  *  Andrey Cherkashin <andoriyu@gmail.com>
  *  Andrey Chernov <ache@FreeBSD.org>
  *  Andrey Kuzmin <akuz84@gmail.com>
  *  Andrey Simonenko
  *  Andrey Zonov <andrey@zonov.org>
  *  Andris Raugulis <moo@arthepsy.eu>
  *  Andy Fawcett <andy@athame.co.uk>
  *  Anes Mukhametov <anes@anes.su>
  *  Anish Mistry
  *  Anish Mistry <amistry@am-productions.biz>
  *  Antoine Brodin <antoine@FreeBSD.org>
  *  Anton Berezin <tobez@tobez.org>
  *  Anton Karpov <toxa@toxahost.ru>
  *  Anton Lysenok <bart@tapolsky.net.ua>
  *  Anton Statutov <astatutov@gmail.com>
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Aragon Gouveia <aragon@phat.za.net>
  *  Arjan van der Velde <noresult@xs4all.nl>
  *  Artem Zaytsev <a.arepo@gmail.com>
  *  Ashish SHUKLA <wahjava@gmail.com>
  *  Austin Shafer <ashafer@badland.io>
  *  Babak Farrokhi <farrokhi@FreeBSD.org>
  *  Baptiste Grenier <gwarf@gwarf.org>
  *  Bartek Rutkowski <robak@FreeBSD.org>
  *  Ben Kibbey <bjk@arbornet.org>
  *  Ben Woods <woodsb02@FreeBSD.org>
  *  Bjoern A. Zeeb <bzeeb+freebsd+ports@zabbadoz.net>
  *  Blaz Zupan <blaz@amis.net>
  *  Boris Kochergin <spawk@acm.poly.edu>
  *  Boris Popov <bp@FreeBSD.org>
  *  Boris Samorodov <bsam@FreeBSD.org>
  *  Brad Lanam <bll@gentoo.com>
  *  Brian Dean <bsd@FreeBSD.org>
  *  Brian Handy <handy@physics.montana.edu>
  *  Brian Somers <brian@FreeBSD.org>
  *  Cameron Katri <me@cameronkatri.com>
  *  Carlo Strub
  *  Chad Castleberry AKA ritalin
  *  Charles Swiger <chuck@pkix.net>
  *  Charlie Kester <corky1951@comcast.net>
  *  Chifeng Qu <chifeng@gmail.com>
  *  Chris Calvey <chris@securityforensics.co.uk>
  *  Chris D. Faulhaber <jedgar@fxp.org>
  *  Chris Howey <howeyc@gmail.com>
  *  Christer Edwards <christer.edwards@gmail.com>
  *  Christopher Boumenot <boumenot@gmail.com>
  *  Christopher Key <cjk32@cam.ac.uk>
  *  Colin Booth <colin@heliocat.net>
  *  Colin Percival
  *  Conrad Meyer <cem@FreeBSD.org>
  *  Cosmin Stroe <cstroe1@uic.edu>
  *  Craig Leres <leres@FreeBSD.org>
  *  Craig Rodrigues <rodrigc@FreeBSD.org>
  *  Cy Schubert <cy@FreeBSD.org>
  *  Cyrille Lefevre <Cyrille.Lefevre@laposte.net>
  *  Cyrille Lefevre <clefevre@citeweb.net>
  *  Dale Woolridge <dale.woolridge@gmail.com>
  *  Dan Langille <dan@langille.org>
  *  Dan Piponi <wmtop@tanelorn.demon.co.uk>
  *  Daniel Baker <dbaker@FreeBSD.org>
  *  Daniel Bond
  *  Daniel Gerzo <danger@FreeBSD.org>
  *  Daniel Harris <dannyboy@subdimension.com>
  *  Daniel Johansson <donnex@donnex.net>
  *  Daniel Roethlisberger <daniel@roe.ch>
  *  Daniel Solsona <daniel@ish.com.au>, Guido Falsi <madpilot@FreeBSD.org>
  *  Daniel Thiele
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  Danilo Egea Gondolfo <danilogondolfo@gmail.com>
  *  Danny Howard <dannyman@toldme.com>
  *  Dave Cottlehuber <dch@skunkwerks.at>
  *  David Gardner
  *  David Le Brun <david@dyn-ns.net>
  *  David Naylor <dbn@FreeBSD.org>
  *  David O'Brien (obrien@FreeBSD.org)
  *  David O'Brien (obrien@NUXI.com)
  *  David O'Brien <obrien@FreeBSD.org>
  *  David O'Brien <obrien@cs.ucdavis.edu>
  *  David Thiel <lx@redundancy.redundancy.org>
  *  David W. Chapman Jr. (dwcjr@FreeBSD.org)
  *  Denis Barov
  *  Denis Barov <dindin@dindin.ru>
  *  Denis N. Peplin <info@volginfo.ru>
  *  Dennis Herrmann <dhn@FreeBSD.org>
  *  Dereckson <dereckson@gmail.com>
  *  Derik van Zuetphen <dz@426.ch>
  *  Devin Teske <dteske@FreeBSD.org>
  *  Devin Teske <dteske@vicor.com>
  *  Dikshie
  *  Dima Panov <fluffy@Fluffy.Khv.RU>
  *  Dima Sivachenko <dima@chg.ru>
  *  Dirk Engling <erdgeist@erdgeist.org>
  *  Dmitri Nikulin <setagllib@optusnet.com.au>
  *  Dmitry Frolov <frol@nov.net>
  *  Dmitry N Fomin <fdn@okbire.ru>
  *  Dmitry Sivachenko <demon@FreeBSD.org>
  *  Dmitry Sivachenko <dima@Chg.RU>
  *  Dmitry Yashin <dmitry@yashin.su>
  *  Dmitry Yu Okunev dyokunev@ut.mephi.ru
  *  Dom Mitchell <dom@happygiraffe.net>
  *  Dom Mitchell <dom@myrddin.demon.co.uk>
  *  Dominic Fandrey <kamikaze@bsdforen.de>
  *  Donald Burr <dburr@FreeBSD.org>
  *  Doug Harple
  *  Douglas Thrift
  *  Dryice Liu <dryice@dryice.name>
  *  Dylan Bridgman
  *  Ed Schouten <ed@FreeBSD.org>
  *  Ed Schouten <ed@fxq.nl>
  *  Ederson de Moura <ederbs@ederbs.org>
  *  Edson Brandi <ebrandi@fugspbr.org>
  *  Eduard Martinescu
  *  Edward Tomasz Napierala <trasz@FreeBSD.org>
  *  Edwin Groothuis <edwin@mavetju.org>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Emmanuel Vadot <manu@freebsd.org>
  *  Enrico M. Crisostomo <enrico.m.crisostomo@gmail.com>
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Erik Greenwald <erik@smluc.org>
  *  Erwin Lansing <erwin@FreeBSD.org>
  *  Eugene Grosbein <eugen@FreeBSD.org>
  *  Evan Sarmiento <esarmiento@wayfair.com>
  *  Evgeny Zhirnov <jirnov@gmail.com>
  *  Fabian Keil <fk@fabiankeil.de>
  *  Felippe de Meirelles Motta <lippemail@gmail.com>
  *  Florent Thoumie <flz@xbsd.org>
  *  Florian Smeets <flo@smeets.im>
  *  Frank Fenor <frank@fenor.de>
  *  Frank Wall <fw@moov.de>
  *  Frederic Culot <culot@FreeBSD.org>
  *  FreeBSD GNOME Team <gnome@freebsd.org>
  *  Frerich Raabe <frerich.raabe@gmx.de>
  *  Fukang Chen <loader@FreeBSD.org>
  *  Gabor Zahemszky
  *  Gabriel M. Dutra <0xdutra@gmail.com>
  *  Ganael LAPLANCHE <ganael.laplanche@martymac.org>
  *  Ganael Laplanche <ganael.laplanche@martymac.org>
  *  Gasol Wu <gasol.wu@gmail.com>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  George Cox <gjvc@gjvc.com>
  *  George Neville-Neil gnn@freebsd.org
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Gerhard Häring <gh@ghaering.de>
  *  Gerrit Beine <tux@pinguru.net>
  *  Gert Doering <gert@space.net>
  *  Gleb Kurtsou <gleb@FreeBSD.org>
  *  Gleb Smirnoff <glebius@FreeBSD.org>
  *  Greg Larkin <glarkin@FreeBSD.org>
  *  Greg Lewis <glewis@FreeBSD.org>
  *  Guangyuan Yang <ygy@FreeBSD.org>
  *  Gustau Perez i Querol <gustau.perez@gmail.com>
  *  Gvozdikov Veniamin <g.veniamin@googlemail.com>
  *  Hakisho Nukama <nukama@gmail.com>
  *  Hans Petter Selasky <hselasky@freebsd.org>
  *  Harshavardhana
  *  Heiner <h.eichmann@gmx.de>
  *  Henrik Brix Andersen <brix@FreeBSD.org>
  *  Hizbulin Ildar <hizel@vyborg.ru>
  *  Hokan
  *  Hondareyte <lhondareyte@laposte.net>
  *  Hung-Yi Chen <gaod@hychen.org>
  *  Ian Lepore <ian@FreeBSD.org>
  *  Igor Pokrovsky <ip@unixway.org>
  *  Ivan Dreckman <ivannashdreckman@fastmail.fm>
  *  Ivan Lago <ivan.lago@ifom-ieo-campus.it>
  *  J.R. Oldroyd <fbsd@opal.com>
  *  James Hunt <james.hunt@ubuntu.com>
  *  James O'Gorman <james@netinertia.co.uk>
  *  Jamie Heckford <jamie@jamiesdomain.co.uk>
  *  Jan Stocker <Jan.Stocker@t-online.de>
  *  Janne Snabb <snabb@epipe.com>
  *  Jase Thew <freebsd@beardz.net>
  *  Jason Evans <jasone@FreeBSD.org>
  *  Jason Harris <jharris@widomaker.com>
  *  Jason Helfman <jgh@FreeBSD.org>
  *  Jean-Yves Lefort <jylefort@FreeBSD.org>
  *  Jeffrey Goldberg <jeffrey@goldmark.org>
  *  Jeffrey H. Johnson <CPE1704TKS@bellsouth.net>
  *  Jeremy Chadwick <freebsd@jdc.parodius.com>
  *  Jeremy Chadwick <jdc@parodius.com>
  *  Jeremy Shaffner <jeremy@external.org>
  *  Jesse
  *  Jesse Smith
  *  Jesse Smith <jessefrgsmith@yahoo.ca>
  *  Jesse van den Kieboom <troplosti@orcaweb.cjb.net>
  *  Jev Björsell <ports@ecadlabs.com>
  *  Jim Pirzyk <pirzyk@FreeBSD.org>
  *  Jim Pirzyk pirzyk@FreeBSD.org
  *  Jim Riggs <ports@christianserving.org>
  *  Jim Shewmaker
  *  Jin-Sih Lin <linpct@gmail.com>
  *  Jin-Sih, Lin <linpct@gmail.com>
  *  Joe Barbish
  *  Joe Barbish <jail-primer1@a1poweruser.com>
  *  Joe Barbish <qchroot1@a1poweruser.com>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Joerg Pulz <Joerg.Pulz@frm2.tum.de>
  *  Johannes Dieterich <jmd@FreeBSD.org>
  *  John D. "Trix" Farrar <trix@basement.net>
  *  John Hixson <jhixson@FreeBSD.org>
  *  John Hixson <jhixson@freebsd.org>
  *  John Hixson <john@pcbsd.org>
  *  John Reynolds <johnjen@reynoldsnet.org>
  *  Jon Wilson <jon@phuq.co.uk>
  *  Jonathan Liu <Net147@hotmail.com>
  *  Joris Vandalon
  *  Jose G. Juanino <jjuanino@gmail.com>
  *  Josef El-Rayes <josef@FreeBSD.org>
  *  Joseph Benden <joe@thrallingpenguin.com>
  *  Jouke Witteveen <j.witteveen@gmail.com>
  *  Jov <amutu@amutu.com>
  *  Ju Pengfei <jupengfei@gmail.com>
  *  Juergen Lock <nox@FreeBSD.org>
  *  Juergen Lock <nox@jelal.hb.north.de>
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  Jung-uk Kim <jkim@FreeBSD.org>
  *  Juraj Lutter <otis@sk.FreeBSD.org>
  *  Jyun-Yan You <jyyou@cs.nctu.edu.tw>
  *  KIMURA Takamichi <takamiti@tsden.org>
  *  Kai Wang <kaiwang27@gmail.com>
  *  Kamila Souckova <kamila@ksp.sk>
  *  Kay Lehmann
  *  Kay Lehmann <kay_lehmann@web.de>
  *  Kevin Bowling <kbowling@FreeBSD.org>
  *  Kirill Ponomarev <krion@FreeBSD.org>
  *  Kirill Ponomarew <ponomarew@oberon.net>
  *  Kirk Strauser <kirk@strauser.com>
  *  Konstantin Menshikov <kostjnspb@yandex.ru>
  *  Konstantin Reznichenko <kot@premierbank.dp.ua>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Koop Mast<kwm@FreeBSD.org>
  *  Kris Kennaway <kris@FreeBSD.org>
  *  Kris Moore <kmoore@FreeBSD.org>
  *  Kubilay Kocak <koobs@FreeBSD.org>
  *  Kueifeng Li <thinker@branda.to>
  *  Lapo Luchini <lapo@lapo.it>
  *  Lars Engels <lars.engels@0x20.net>
  *  Lars Engels <lme@FreeBSD.org>
  *  Lars Köller <Lars.Koeller@Uni-Bielefeld.DE>
  *  Lars Thegler <lars@thegler.dk>
  *  Lars Thegler <lth@FreeBSD.org>
  *  Len Sassama
  *  Leo Vandewoestijne <freebsd@dns-lab.com>
  *  Loic Pefferkorn <loic-freebsd@loicp.eu>
  *  Loren M. Lang
  *  Luca Pizzamiglio <pizzamig@FreeBSD.org>
  *  Lucas Holt <luke@foolishgames.com>
  *  Lukasz Wasikowski <lukasz@wasikowski.net>
  *  Lupe Christoph <lupe@lupe-christoph.de>
  *  M. Warner Losh <imp@FreeBSD.org>
  *  MANTANI Nobutaka <nobutaka@FreeBSD.org>
  *  Mahdi Mokhtari <mokhi64@gmail.com>
  *  Mahlon E. Smith <mahlon@martini.nu>
  *  Manuel Rabade Garica <mig@mig-29.net>
  *  Marc G. Fournier <scrappy@FreeBSD.org>
  *  Marc Lagrange <rhaamo@gruik.at>
  *  Marcel Kaiser <mk@nic-nac-project.org>
  *  Marcin Cieslak <saper@SYSTEM.PL>
  *  Marcin Simonides <marcin@studio4plus.com>
  *  Marco Steinbach <coco@executive-computing.de>
  *  Mario S F Ferreira <lioux@linf.unb.br> et al.
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Marius Strobl <marius@FreeBSD.org>
  *  Mark Blackman <tmb_ports@maddog.u-net.com>
  *  Mark Felder <feld@FreeBSD.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Markus Dolze
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Otto
  *  Martin Pala <martinp@tildeslash.com>
  *  Martin Tournoij <carpetsmoker@xs4all.nl>
  *  Martin Tournoij <martin@arp242.net>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Marwan Burelle <marwan.burelle@lri.fr>
  *  Mateusz Piotrowski <0mp@FreeBSD.org>
  *  Matt Lancereau <matt@rimasec.net>
  *  Matt Lancereau <ports@FreeBSD.org>
  *  Matt Peterson <matt@peterson.org>
  *  Matteo Cypriani <mcy@lm7.fr>
  *  Matthew Dillon <dillon@backplane.com>
  *  Matthew Fuller <fullermd@over-yonder.net>
  *  Matthew Seaman <matthew@FreeBSD.org>
  *  Matthias Fechner <mfechner@FreeBSD.org>
  *  Max Khon
  *  Max Khon <fjoe@FreeBSD.org>
  *  Max Laier <max@love2party.net>
  *  Maxim Ignatenko <gelraen.ua@gmail.com>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Melvyn Sopacua <melvyn@magemana.nl>
  *  Michael Gmelin <freebsd@grem.de>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael L. Hostbaek (mich@freebsdcluster.org)
  *  Michael L. Hostbaek <mich@freebsdcluster.org>
  *  Michael Moll <kvedulv at kvedulv.de>
  *  Michael Moll <kvedulv@kvedulv.de>
  *  Michael Ranner <michael@ranner.eu>
  *  Michael Reifenberger
  *  Miguel Mendez <flynn@energyhq.homeip.net>
  *  Mike Meyer <mwm@mired.org>
  *  Mike Muir <mmuir@es.co.nz>
  *  Mikolaj Golub <to.my.trociny@gmail.com>
  *  Mikolaj Golub <trociny@FreeBSD.org>
  *  Mohammad S. Babaei <info@babaei.net>
  *  Muhammad Moinur Rahman <bofh@FreeBSD.org>
  *  Murilo Opsfelder <mopsfelder@gmail.com>
  *  Murray Nesbitt <freebsd@nesbitt.ca>
  *  Mykola Dzham <i@levsha.me>
  *  Natacha Porte <natbsd@instinctive.eu>
  *  Nick Hibma <n_hibma@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Nikola Kolev <koue@chaosophia.net>
  *  Nikolai Lifanov
  *  Nikolai Lifanov <lifanov@FreeBSD.org>
  *  Nikolai Lifanov <lifanov@FreeBSD.org> and Ben Woods <woodsb02@FreeBSD.org>
  *  Nikolay Dachev <jadm@dachev.info>
  *  Nobuhiro Yasutomi <nobu@psrc.isac.co.jp>
  *  Nosov Artem <chip-set@mail.ru>
  *  Oleg A. Mamontov <oleg@mamontov.net>
  *  Oleg Alexeenkov <proler@gmail.com>
  *  Oleg Ginzburg
  *  Oleg Ginzburg <olevole@olevole.ru>
  *  Oliver Braun <obraun@FreeBSD.org>
  *  Oliver Eikemeier
  *  Oliver Lehmann <Kai_Allard_Liao@gmx.de>
  *  Oliver Lehmann <oliver@FreeBSD.org>
  *  Olivier Cochard-Labbe <olivier@FreeBSD.org>
  *  Olivier Duchateau
  *  Olivier Duchateau <duchateau.olivier@gmail.com>
  *  Olivier Duchateau <olivierd@FreeBSD.org>
  *  Palle Girgensohn <girgen@FreeBSD.org>
  *  Patrice Clement <monsieurp@gentoo.org
  *  Patrice Clement <monsieurp@gentoo.org>
  *  Patrick Li <pat@databits.net>
  *  Patrick M. Hausen (pmh@hausen.com)
  *  Patrick Rinke <patrick@rinke-bochum.de>
  *  Paul Dlug <paul@aps.org>
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Pavel Novikov
  *  Pavel Timofeev <timp87@gmail.com>
  *  Pawel Pekala <c0rn@o2.pl>
  *  Pete Fritchman <petef@databits.net>
  *  Peter Ankerstal <peter@pean.org>
  *  Peter Edwards <pmedwards@eircom.net>
  *  Peter TKATHENKO <peter@flytrace.com>
  *  Philippe Casidy <pcasidy@casidy.com>
  *  Pieter Danhieux <opr@bsdaemon.be>
  *  Piotr Kubaj <pkubaj@FreeBSD.org>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Qiang Guo <guoqiang_cn@126.com>
  *  Radim Kolar
  *  Ralf van Dooren <r.vdooren@snow.nl>
  *  Rashid N. Achilov <shelton@granch.ru>
  *  Remington Lang <MrL0Lz@gmail.com>
  *  Renaud Chaput <renchap@cocoa-x.com>
  *  René Ladan <rene@freebsd.org>
  *  Ricardo A. Reis <ricardo.areis@gmail.com>
  *  Robert Gogolok <gogo@cs.uni-sb.de>
  *  Rod Person <rodperson@rodperson.com>
  *  Roderick van Domburg <r.s.a.vandomburg@student.utwente.nl>
  *  Rodrigo Graeff <delphus@gmail.com>
  *  Rodrigo OSORIO <rodrigo@FreeBSD.org>
  *  Roman Bogorodskiy <novel@FreeBSD.org>
  *  Rozhuk Ivan <rozhuk.im@gmail.com>
  *  Rusmir Dusko <nemysis@FreeBSD.org>
  *  Russell Jackson <raj@csub.edu>
  *  Ryan Steinmetz <zi@FreeBSD.org>
  *  Sachidananda Urs
  *  Samir Noir <samir@noir.im>
  *  Samy Al Bahra <samy@kerneled.com>
  *  Samy Al Bahra <samy@kerneled.org>
  *  Sascha Klauder <sklauder@trimind.de>
  *  Scot Hetzel <swhetzel@gmail.com>
  *  Seamus Venasse <svenasse@polaris.ca>
  *  Sean Rees <sean@rees.us>
  *  Sebastian Yepes F. <esn@x123.info>
  *  Sergei Kolobov <sergei@kolobov.com>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Kozlov <sergey.kozlov@intel.com>
  *  Sergey Kozlov <skozlov@FreeBSD.org>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Shigeyuki FUKUSHIMA <shige@FreeBSD.org>
  *  Slawomir Wojciech Wojtczak <vermaden@interia.pl>
  *  Soeren Boll Overgaard <boll@tolkien.dk>
  *  Sofian Brabez <sbrabez@gmail.com>
  *  Sofian Brabez <sbz@FreeBSD.org>
  *  SriSaiGanesh
  *  Stanislav Sedov <ssedov@mbsd.msk.ru>
  *  Stefan Esser
  *  Stefan Jahn <stefan.jahn@nemesis-sektor.de>
  *  Stefan Rumetshofer
  *  Steffen Fritz <steffen@fritz.wtf>
  *  Steffen Vogelreuter
  *  Stephen J. Roznowski <sjr@home.net>
  *  Steve Atwell
  *  Steve Wills <swills@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Steven Kreuzer <steven@exit2shell.com>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  The Anarcat <anarcat@anarcat.ath.cx>
  *  Thierry Dussuet <dussuett@wigwam.ethz.ch>
  *  Thierry Thomas (<thierry@FreeBSD.org>)
  *  Thierry Thomas (<thierry@pompo.net>)
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Bartelmess <thomas@bartelmess.io>
  *  Thomas E. Zander <riggs@rrr.de>
  *  Thomas Hurst <tom@hur.st>
  *  Thomas Seck <tmseck@netcologne.de>
  *  Thomas Zander <riggs@FreeBSD.org>
  *  Thorsten Greiner <thorsten.greiner@web.de>
  *  Tim Bishop <tdb@FreeBSD.org>
  *  Tim Bishop <tim@bishnet.net>
  *  Tim Welch <ports@thepentagon.org>
  *  Tim van der Hoek <hoek@FreeBSD.org>
  *  Timothy Redaelli
  *  Tobias Roth <ports@fsck.ch>
  *  Tom Judge <tom@tomjudge.com>
  *  Tom Rhodes <trhodes@FreeBSD.org>
  *  Tomoyuki Sakurai <cherry@trombik.org>
  *  Tony Narlock <tony@git-pull.com>
  *  Tony Shadwick <tshadwick@oss-solutions.com>
  *  Torsten Zuehlsdorff <tz@FreeBSD.org>
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  Uffe Jakobsen <uffe@uffe.org>
  *  Ulrich Spoerlein <uspoerlein@gmail.com>
  *  Valerio Daelli <valerio.daelli@gmail.com>
  *  Vanilla I. Shu <vanilla@FreeBSD.org>
  *  Vanilla I. Shu <vanilla@MinJe.com.TW>
  *  Vasiliy Ch <blttll@gmail.com>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vladimir Kondratyev <wulf@FreeBSD.org>
  *  Vladimir Laskov <samflanker@gmail.com>
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Wes Peters <wes@FreeBSD.org>
  *  William Grzybowski <wg@FreeBSD.org>
  *  Wu Chin-Hao <wchunhao@cs.nctu.edu.tw>
  *  Xavier Beaudouin <kiwi@oav.net>
  *  Xin LI <delphij@FreeBSD.org>
  *  Xin Li <delphij@FreeBSD.org>
  *  Yasuhiro KIMURA <yasu@utahime.org>
  *  Yen-Ming Lee <leeym@FreeBSD.org>
  *  Yi-Jheng Lin <yzlin@cs.nctu.edu.tw>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Ying-Chieh Liao <ijliao@csie.nctu.edu.tw>
  *  Yinghong Liu <relaxbsd@gmail.com>
  *  Yonatan <Yonatan@xpert.com>
  *  Yonatan <onatan@gmail.com>
  *  Yoshifumi Watanabe <mwatts@edu1.tokyo-med.ac.jp>
  *  Yoshihiko Sarumaru <mistral@imasy.or.jp>
  *  Yuan-Chen Cheng <ycheng@sinica.edu.tw>
  *  Yuichiro NAITO <naito.yuichiro@gmail.com>
  *  Yuri Victorovich <yuri@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Zane C, Bowers <vvelox@vvelox.net>
  *  Zane C. Bowers-Hadley <vvelox@vvelox.net>
  *  Zeus Panchenko <zeus@gnu.org.ua>
  *  alepulver
  *  anarcat
  *  anders
  *  arved
  *  asami
  *  bjohnson@wedgie.org
  *  bsdx
  *  carl@servicefactory.com
  *  chinsan
  *  chinsan <chinsan.tw@gmail.com>
  *  chuck@pkix.net
  *  clsung
  *  cracauer@cons.org "Martin Cracauer"
  *  cy@FreeBSD.org
  *  dds
  *  desmo@bandwidth.org
  *  dieringe
  *  eivind
  *  freebsd@spatula.net
  *  futatuki
  *  gahr
  *  grog
  *  gtodd@bellanet.org
  *  gurkan@phys.ethz.ch
  *  ijliao
  *  imp
  *  ismail.yenigul@endersys.com.tr
  *  jack
  *  janos.mohacsi@bsd.hu
  *  jfreund
  *  jhb
  *  jim@thehousleys.net
  *  jkh
  *  joerg
  *  jon@witchspace.com
  *  joseph@randomnetworks.com
  *  jpaetzel@FreeBSD.org
  *  jrhett@netconsonance.com
  *  jwd
  *  kaz@kobe1995.net (NAKAMURA Kauzushi)
  *  kiesel
  *  kiesel@schlund.de
  *  kmoore@FreeBSD.org
  *  koma2@lovepeers.org
  *  kuriyama
  *  luigi@FreeBSD.org
  *  lx@redundancy.redundancy.org
  *  marius@alchemy.franken.de
  *  mi@aldan.algebra.com
  *  mich@freebsdcluster.org
  *  michael@fuckner.net
  *  mm
  *  mranner@inode.at
  *  netch@netch.kiev.ua
  *  ntarmos@ceid.upatras.gr
  *  okeeblow <root@cooltrainer.org>
  *  papowell@lprng.com
  *  pat
  *  petef@FreeBSD.org
  *  peter
  *  philip@FreeBSD.org
  *  ports@c0decafe.net
  *  rantapaa@uswest.net
  *  rhay
  *  rhwang@bigpanda.com
  *  roam@FreeBSD.org
  *  roam@orbitel.bg
  *  samm
  *  samu <freebsd-ports@samu.pl>
  *  se@freebsd.org
  *  shige
  *  stas
  *  sten@blinkenlights.nl
  *  sterling
  *  sumikawa
  *  takawata@jp.FreeBSD.org
  *  thierry@pompo.net
  *  thompsa@FreeBSD.org
  *  trasz
  *  trasz <trasz@pin.if.uz.zgora.pl>
  *  tundra
  *  uffe@uffe.org
  *  uri@keves.org
  *  walt
  *  will
  *  wmoran
  *  wosch

With hat:	portmgr

    ea71236

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

19:03 lwhsu 

sysutils/qjail: Updaet to 5.5

1.  Change default ftp site to ftp from ftp12.
2.  Remove config -w and -W [Set vnet.interface NIC]
3.  Add -f flag to unmount command when releasing memory disc.
4.  Change so this version of qjail only runs on 12.0 and newer
    because pf is vimage aware now.
5.  If local install [-f] jump around stable, current check logic.
6.  Change/add logic & code to implement bridge/epair method for vnet jails.
7.  Change qjail.8 about vimage no longer having to be compiled into kernel 12.0
8.  Change "config -v logic to setup vnet jail with pf, ipf, ipf firewall.
9.  Add start vnet code to qjail script to check for host/vnet jail
    firewall mis-match.
10. Add start vnet code to boottime script to check for host/vnet jail
    firewall mis-match.
11. Update all the manuals to reflect the about changes.
12. Add check to "config" so no ipv4 change for vnet jails.
12. Block config ip address changes for vnet jail because of
    class c ip allocations.
14. Change verify_ip subroutine to include check for private ip address and
    127.x.x.x addresses and put on lo0 interface to make that jail local only.
14. Change verify_ip subroutine to include check for vnet class c
    address range.
15. Create non-vnet jail using 127.x.x.x ip4 address to make that jail
    local access only. When config -v to change jail to vnet jail it becomes
    local access only also.
16. Change "config" -4 & -6 to remove the ip address when the word "none" is
    used as in -4 none.
17. Change install to check for amd64 & i386 platform architecture and use
    path with amd62/amd64 and a single architecture path for all other
    platforms.
18. On "qjail install -f /usr/base.txz" option fixed so it works.
19. Diff options changed between 12.1 and 12.2, Removed the -u.

PR:		250696
Submitted by:	Joe Barbish <qjail1@a1poweruser.com> (maintainer)
MFH:		2020Q4

 

13:32 rene 

Remove compatibility code for FreeBSD < 11.2 from all ports.

Simplify some ports where DragonFlyBSD no longer needs to be special-cased.
Submitted by:	rene
Reviewed by:	bapt, jbeich
Differential Revision:	https://reviews.freebsd.org/D17724

 

01:14 adamw 

Update to 5.4.

Aaron Sachau sent email about bug he found. The "qjail console jailname"
command that has a jail with a fib assigned to it was not working correctly.
This error was introduced by changes done to correct coding syntax problems
that the hs-shellcheck package found and corrected and then published in
qjail-5.2. Reverted back to how qjail-5.1 did it. Aaron Sachau tested the
patch. Fixed now.

PR:		221839
Submitted by:	maintainer (Joe Barbish)

 

02:04 adamw 

Update to 5.3

qjail-5.3-change-log

1. Adam Weinberger sent email about bug he found. The
   qjail console -c "ls /user/local" jailname
   command was not working correctly. This error was introduced by
   changes done to correct coding syntax problems that the hs-shellcheck
   package found and published in qjail-5.2. Fixed now.

2. Adam Weinberger also sent email containing a patch that standardized
   error messages and corrected some spelling errors.
   After review the patch was applied.

3. Checked all the 'kill' messages for 'Error:' prefix and added the
   prefix where it was missing to complete the standardization.

4. While reviewing the patch changes I noticed that the "qjail install"
   logic had some duplicated code. I removed it to make more of it
   part of the fall through logic path.

5. While working on the "qjail install" logic, 11.1-BETA1 was published.
   It cam to my attention that BETA and RC Release Engineering builds
   are now having distribution files built.
   Changed the 'qjail install' logic to auto handle BETA, RC, builds in
   the same manner RELEASE, and RELEASE-p builds were being handled.

6. Corrected the qjail manual to reflect the changes made to the script.

PR:		220113
Submitted by:	maintainer (Joe Barbish)
MFH:		2017Q2

 

04:21 miwi 

- Update to 5.2

PR:		218272

 

16:49 mat 

Update to 5.1.

PR:		217177
Submitted by:	maintainer
Sponsored by:	Absolight

 

16:49 mat 

Remove the remaining IGNORE_FreeBSD_9 lines.

Sponsored by:	Absolight

 

21:49 mat 

Remove the CONFLICTS_INSTALL lines, they can't conflict, they can't be
installed at the same time.

Submitted by:	maintainer
Sponsored by:	Absolight

 

15:04 mat 

Cleanup whitespace at EOL.

Pointy hat:	mat
Sponsored by:	Absolight

 

14:53 mat 

Update sysutils/qjail to 5.0 to handle FreeBSD 11+.

Copy it to sysutils/qjail4 for FreeBSD 10 and sync CONFLICTS with the
FreeBSD 8/9 version.

PR:		212201, 212202
Submitted by:	maintainer
Sponsored by:	Absolight

 

14:42 amdmi3 

- Update to 4.9
- While here, add NO_ARCH

PR:		211145
Submitted by:	qjail1@a1poweruser.com (maintainer)

 

13:13 pi 

sysutils/qjail: 4.7 -> 4.8

There are changes to the internals of the jail(8) command and changes to
parameter names in the periodic files that have occurred in FreeBSD
Release 10.2 that effects jail behavior in a very minor way.

This version of qjail has an built in auto convert function that
fixes those minor behavior problems with existing jails. This auto
convert function is not documented in the qjail manual. Its only
shown in the port install output.  Issue [ qjail update -u ] from
the host console.

This will cause the existing "flavors" default & ssh-default
directories to be renamed and new ones populated. Then in each
existing jail the periodic.conf and newsyslog.conf files will be
renamed with .saved suffix and new ones added.  The rc.conf file
will be updated in place changing the syslogd_enable= parameter
value from "NO" to "YES".

The new periodic.conf file has many sendmail reporting options
disabled because sendmail is disabled in the jails rc.conf file by
default. This drastically reduces the daily. weekly, monthly system
and security status reports elapse run times. This has a major
effect on operating system performance where there are a large
number of jails.

PR:		209929
Submitted by:	Joe Barbish <qjail1@a1poweruser.com> (maintainer)
Reviewed by:	Vladimir Krstulja <vlad-fbsd@acheronmedia.com>, robak

 

13:16 amdmi3 

- Update to 4.7

Changes:

1. When running "qjail create -c" option for creating a jail with ssh and
   a user id / password of the jail name. On first start the user id
   gets created in the jail. This first start status was not being
   turned off. Added code to start logic to fix this.

2. Did not like the way console function was handling console commands
   being passed to the jail for execution. Changed the logic so it works
   like this. If -c option used alone or if -c & -u used together,
   them default jexec command format used. If no -c option then
   "jexec jailname login -f <root or -u value>" format used.
   This is real login causing the Welcome message to display.

3. Corrected the qjail manual console function to document usage of
   -c and -u flags.

PR:		209737
Submitted by:	qjail1@a1poweruser.com (maintainer)

 

15:05 flo 

Update to 4.6

PR:		208980
Submitted by:	Joe Barbish <qjail1@a1poweruser.com>
Sponsored by:	Essen Linuxhotel Hackathon 2016

 

22:09 robak 

sysutils/qjail: update 4.4 -> 4.5

PR:		208918
Submitted by:	Joe Barbish <qjail1@a1poweruser.com> (maintainer)

 

05:14 riggs 

Update to upstream version 4.4

PR:		208851
Submitted by:	qjail1@a1poweruser.com (maintainer)

 

13:18 mat 

Fixup some whitespace at the beginning of lines problems.

With hat:	portmgr
Sponsored by:	Absolight

 

06:21 pi 

sysutils/qjail: 4.2 -> 4.3

PR:		206935
Submitted by:	Joe Barbish <qjail1@a1poweruser.com> (maintainer)

 

13:55 pi 

sysutils/qjail: 4.1 -> 4.2

- Correct "qjail config -n" routine logic

PR:		204601
Submitted by:	qjail1@a1poweruser.com (maintainer)

 

02:59 wen 

- Update to 4.1

PR:		202934
Submitted by:	qjail1@a1poweruser.com(maintainer)

 

03:35 vanilla 

Upgrae to 4.0.

PR:		199684
Submitted by:	maintainer

 

06:54 vanilla 

Upgrade to 3.9.

PR:		199651
Submitted by:	maintainer

 

12:21 vanilla 

Upgrade to 3.8.

PR:		199198
Submitted by:	maintainer

 

13:08 bofh 

[MAINTAINER] sysutils/qjail: Update version 3.6=>3.7

- Add LICENSE (BERNE-CONVENTION)
- Change Maintainer email address
- Use @sample framework

PR:		199090
Submitted by:	qjail@a1poweruser.com

 

11:35 zi 

- Reset MAINTAINER due to fatal bounce

Reported by:	portscout

 

03:46 vanilla 

Upgrade to 3.6.

1. Add allow.mount.tmpfs parameter to build-jail.conf routine.
   Check if kernel tmpfs.ko has been loaded
   to host and if not then issue "kldload tmpfs" command.

2. Add code to config logic for lower case t to enable
   allow.mount.tmpfs parameter and upper case T to disable
   allow.mount.tmpfs parameter.

3. Remove -l null as method to disable nullfs and replace with
   upper case L to to disable nullfs.

4. Add upper case S to disable lower case s option.

5. Remove -w null as method to disable and replace with
   upper case W to to disable.

6. Fix fib -f parameter so it now works as wanted.

7. Comment out code for setcpu parameter as jail(8) now has bug
   about it.

8. Remove -w null as method to disable vnet interface parameter
   and replace with upper case W to disable it.

9. Make appropriate changes to man qjail.8 file.

10. Change good os version from 93 to 92.

11. Make appropriate changes to qjail.bootime script.

PR:		ports/192220
Submitted by:	maintainer

 

19:19 pi 

sysutils/qjail: 3.4 -> 3.5

Updated qjail.bootime script for addition of allow.sysvipc
and ruleset parameters that were added to qjail script in qjail-3.4.

PR:		191660
Submitted by:	qjail@a1poweruser.com (maintainer)

 

01:28 danilo 

- Update from 3.3 to 3.4
- Remove NEED_ROOT
- Update pkg-descr

Changelog: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=191213#c0

PR:		ports/191213
Submitted by:	qjail@a1poweruser.com

 

10:40 pi 

sysutils/qjail: upgrade 3.2 -> 3.3

1. Fix typo in qjail.8 manual.
Change "See jailip below" to "See -4 option"

2. Fix typo in qjail-howto.8 manual as per PR# 186269.
Change a comma , inside of ip address to a . period.
73.x.97,51,10.0.10.126 to 73.x.97.51,10.0.10.126

3. Change qjail.portsnap.conf,
remove index-6 index-7 index-8 statements
replace index-9 with index-10

4. Removed rcvar=`set_rcvar` statement from qjail.bootime script.
In Release 10.0 its no longer included in the rc.d scripts and
was causing a non-harmful bogus boot time message. But this
de-activated the ability to control the selection of boot time
starting of jails using the qjail_enable="YES" statement in
the hosts /etc/rc.conf. Put rcvar="qjail_enable" in qjail.bootime
script and things work as exspected.

5. Correct coding bug in archive logic to archive sharedfs per zone.

6. Correct coding bug for Sanity check to see if any jails are running.

7. Changed "qjail install" logic to check that this version of qjail only
runs on release-10.0. This is due to unique properties of jail(8) & rc.d
that are not in 9.2 and older releases.

8. Changed "qjail create" and "qjail config" logic to check if the
-4 and/or -6 IP address are prefixed with "<if_device>|" and/or
suffixed with "/<netmask>" values. jail(8) says this is valid syntax,
but its NOT allowed as valid syntax to qjail.

9. Changed "qjail create" logic to check if no -n value was entered. If not
then populate the -n value with the interface default nic device name
obtained from route command. This is now the automatic default behavior.
The default interface is the one connected to the public internet.
This shortens the "qjail create command" and forces the use of the
automatic creation and deletation of the alias for the jails IP address
on that "network interface name". Made appropriate changes to qjail.8
man page documentation.

10. Changed "qjail create" logic to target another zones archives as input
source. Now you can use any zones archive file as a template to create
a new jail using the existing -a option. New -A option is coded with the
zone name of the target archive file name populating the -a value.
Made appropriate changes to qjail.8 man page documentation.

11. Added -S option to "qjail update" This option will copy the hosts
/usr/src filesystem to sharedfs/usr/src to be shared among all the jails.
Made appropriate changes to qjail.8 man page documentation.

12. Add -P option to "qjail update" This option will copy the hosts
/usr/ports filesystem to sharedfs/usr/ports to be shared among all the jails.
Made appropriate changes to qjail.8 man page documentation.

13. The long time jail(8) bug since 9.1 that deals with the jails /dev
directory which allowed the jail to access things jail should be restricted
from became fixed with 10.0-RELEASE-p2. The hosts /etc/defaults/rc.conf
devfs_load_rulesets="NO" changed to devfs_load_rulesets="YES"
Removed the jail.conf work-a-round statments from the qjail script
build_config_def routine as they are no longer needed.

14. Converted the Port's Makefile to do "stageing".

PR:             ports/189120
Submitted by:   Joe Barbish (maintainer)
Approved by:    culot (mentor)

 

23:06 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
sysutils)

 

18:51 pawel 

Re-add mistakenly removed CONFLICTS_INSTALL line

 

20:52 pawel 

Update to version 3.2

qjail-3.2 change log

1. Added IPv6 support to "create" and "config" commands.

2. Changed the way jail status is determined. Now use "jls -j jailname jid"
 command instead of carring internal jid field in jail definition record.
 This fixed jail status problem when users used the "halt or reboot"
 command on the host instead of the "shutdown now" command.

3. Changed qjail-bootime script to nolonger populate internal jid field
 in jail definition record.

4. Corrected coding of conflicts_install parameter in the port Makefile
 so it functions as wanted. Also inserted message info block about upgrade
 procedure and CONFLICT resolution.

5. Removed all references to qjail.conf file from all man pages.

6. Corrected examples in qjail man for "qjail create" command using
 new -4 option for IPv4 IP addresses.

qjail-3.1 change log http://www.freebsd.org/cgi/query-pr.cgi?pr=179769

1. sharefs/usr/src and sharefs/usr/ports were missing links. Design was to
 have sharedfs share those directories with all jails. Added code to mkdir
 src and port on sharedfs and link to template.

2. For update -b, archive sharedfs, restore sharedfs and install commands,
 replaced the logic of rolling through the qjail.local directory opening
 each definition file to check if jail was running which left the last opened
 jail variables populated, with logic based on using jls command to list
 the running jails and then checking jls list to qjail.global
 directory content of qjail owned jails to determine if jail was running.

3. For archive of image jail, removed qjail prefix from variable name.

4. For "update -b" host binaries have noschg set on a few files, added
 chflags -R noschg "${sharedfs}/${dir}"
 chflags -R nosunlink "${sharedfs}/${dir}"
 commands to remove said status on all files.

5. Add "mount.devfs=1" parameters to build_def function of qjail script and
 qjail-bootime script. This enables ps and top commands to work inside of
 jail. This is a work around for /dev bug in jail(8).

6. "qjail create -a img20 -i 25 img25 10.0.10.20" Using a image archive caused
 cpio to complain when copying the template to populate the img file.
 Replaced cpio with "cp -R dir/" command, also made the same change to
 the dup image logic. The cpio command has problems working with sparse files.

7. Added "qjail config -h" option. This option provides a way to enable "SSH"
 on a jail. Same option as -c of the "qjail create" command.

8. Updated "man qjail" with instructions on using the "mv" command to give
 jails access to the hosts "/usr/ports" or "/usr/src" directories.

9. Added new function to "config" command call -m for manual start jails,
 -m to enable and -M to disable.

10. Changed the "config" command call -r [run, norun] option to -r to enable
 and -R to disable.

qjail-3.0 change log http://www.freebsd.org/cgi/query-pr.cgi?pr=179184

1. This version of qjail has been converted from using the legacy rc.d-method
 as used in all previous versions of qjail, to using the jail(8)
 jail.conf-method available in RELEASE-9.1. This upgrade provides the
 ability to enable the following new options on a per-jail basis.
 exec.fib, allow.raw_sockets, allow.quotas, allow.mount.nullfs,
 allow.mount.zfs, cpuset.id, securelevel, vnet.interface, and vnet.
 The vnet option gives a jail its own network stack using the experimental
 vimage software with or with out ipfw firewall and using if_bridge/epair
 or netgraph for its network. This qjail version is not functional
 for RELEASES older than RELEASE-9.1.

2. The basejail has been renamed to sharedfs and
 newjail has been renamed to template.

3. The archive function now uses the tar utility to bkup the jailname
 filesystem with it's internal qjail admin files.

4. The restore function now uses the tar utility to restore the jailname
 filesystem with it's internal qjail admin files.

5. The -a option of the create command now uses the tar utility to restore
 the jailname filesystem.

6. The qjail man page up-dated to reflect all changes to qjail.

7. The qjail.conf file has been deprecated and removed.

8. Added logic to the "config" command to enable and disable the jail(8)
 selected extended options.

PR:		ports/180773
Submitted by:	Joe Barbish <qjail@a1poweruser.com> (maintainer)

 

16:21 pawel 

Register install conflicts with version 1.x

Submitted by:	maintainer via private email

 

06:38 culot 

- Update to 3.1

PR:		ports/179769
Submitted by:	Joe Barbish <qjail@a1poweruser.com> (maintainer)

 

15:10 pawel 

Register install conflict with sysutils/qjail2

 

22:13 pawel 

Update to version 3.0

PR:		ports/179184
Submitted by:	Joe Barbish <qjail@a1poweruser.com> (maintainer)

 

21:25 bdrewery 

- Update to 2.2
- Unrestrict - license issue has been resolved

PR:		ports/178186
Submitted by:	Joe Barbish <qjail@a1poweruser.com> (maintainer)

 

13:17 bdrewery 

- Mark RESTRICTED

See: http://lists.freebsd.org/pipermail/freebsd-jail/2013-March/002118.html

With hat:	portmgr

 

18:45 crees 

Update to 2.1;

1. Added logic to interrogate the content of flavors for correctness
before allowing them to be merged into the newjail being created.
Only paths targeting directories holding configuration files are
allowed now. The jail create process is terminated and the offending
paths are listed in error messages.

2. Changed the /root/.cshrc file in both flavors default and ssh-default
to now contain setenv PACKAGESITE to point to packages-current
so login users of any jail will have the most current package
version available.

4. In the qjail install logic added code to create these additional paths
in basejail, /usr/ports/packages, /usr/home and /home link.

5. The create -D -I options have been combined to just -d.

6. The create -i -s options have been combined to just -i.

7. The create -c & -C options have been reduced to just -c.

8. The create options -c and -f ssh-default now force the first time
login user to enter a new password.

9. Added logic to create, that rolls through the ip addresses of the
existing
jails to verify the ip address/addresses on the create command are not
all ready used.

10. Corrected the list command display format when jail has more than a
single ip address.

11. Changed the order jails are started, stopped, restarted, and listed
from <z to a> to <a to z>. Also for boot starts.

12. Added system wide logging. Every qjail subcommand and error message
is logged to /var/log/qjail.log. Rotating of the log is enabled.

13. The install subcommand has new -l option to activate system wide
logging.

14. The update subcommand has [-l on|off] option to turn logging on and off.

15. Added new subcommand logmsg. This posts comments to the log file.

16. Changed update option to use its own
/usr/local/etc/qjail.portsnap.conf
file instead of the hosts /etc/portsnap.conf. Enabled REFUSE statements in
/usr/local/etc/qjail.portsnap.conf to drop categories most likely to never
be
used to compile ports inside of a jail.

17. As sparse image allocations get larger  1G -> 5G  creating jails from
archives was taking very long times to complete, 20 minutes or more.
Archives of sparse images larger that 7G caused terminations. All these
things have one thing in common. They all used the pax and cpio utilities.
Turns out these utilities are not sparse file aware. Had to completely
change the way sparse image jails moved through the qjail system. Now the
archive process opens the sparse image and really archives it as a
directory tree jail. This required restore and create options to change
also.

PR:		ports/175771
Submitted by:	Joe Barbish (maintainer)

 

10:05 crees 

Update to 2.0;

Standard maintenance.

1. Added -c option on "qjail create" command that enables ssh access to the
jail and creates user account using jailname for id/pw.

2. Added -C option on "qjail create" command that depends on -D option that
creates ssh access to jail and creates user account using jailname for
id/pw while automatically duplicating jails.

3. Created a customized flavor, ssh-default that enables ssh access to jails.
This flavor contains a login account with id/pw of qjail.

4. Removed -c option from "qjail install" because hosts customized /etc
caused problems with jail start up.

5. Updated man qjail.8 to reflect the changes.

PR:		ports/174890
Submitted by:	Joe Barbish <qjail@a1poweruser.com> (maintainer)

 

20:41 crees 

Update to 1.9:

	Added code to qjail install function to check for
	-STABLE, -PRERELEAASE, and -CURRENT versions running
	on the host and if so issue message that binary source
	is not available for download and to use the
	[qjail install -c] flag to clone the host system to
	populate the basejail with.

	Used setenv UNAME_r "9-stable" command on host to set
	release value seen by qjail.

PR:		ports/174644
Submitted by:	Joe Barbish <qjail@a1poweruser.com> (maintainer)

 

12:25 crees 

Update to 1.8

uname -r shows 4 formats.
9.0-BETA1, 9.0-RC1, 9.0-RELEASE, and 9.0-RELEASE-p1
Logic added by 1.7 was supposed to correctly remove the -p1 string,
which it did if present, but if not present the -RELEASE gets removed
in error which results in the incorrect ftp url path for fetching the
install source.

Rewrote logic to handle -p suffix differently so it gets stripped
off leaving 9.0-RELEASE which is handled normally.

PR:		ports/174037
Submitted by:	Joe Barbish <qjail@a1poweruser.com> (maintainer)
Feature safe:	yes

 

19:07 crees 

Update to 1.7

On 'qjail install' command run on -BETA or -RC host has no binary distribution
source available by design. Added logic to check for this condition and issue
error message informing user.

On 'qjail install' command run on a host that has had security binary patches
applied results in [uname -r] command returning [Release-9.0-p3]. There is no
binary distribution source available by design for patched systems. Added code
to strip the -p3 suffix resulting in the 9.0-Release distribution source being
downloaded and used to populate the basejail.

PR:		ports/173394
Submitted by:	Joe Barbish (maintainer)
Feature safe:	yes

 

17:44 crees 

Update to 1.6

-a option means create new jail from archive file of jail-aaa.
Search of /usr/jails/archive selected incorrect archive file.
If archive files named jail-aaa, jail-aaa-bbb, jail-aaa-bbb-ccc were present
jail-aaa-bbb-ccc was always selected incorrectly.
This same logic was also used for 'qjail restore jail-aaa', but that logic
had check for this condition that told user to use full archive name that
included the date stamp archive was created.  Fixed logic in both functions.

PR:		ports/171724
Submitted by:	maintainer (Joe Barbish <qjail@a1poweruser.com>)

 

23:58 ak 

- Update to 1.5

PR:	ports/170012
Submitted by:	Joe Barbish <qjail@a1poweruser.com> (maintainer)

11:25 jase 

- Update to 1.4

PR:             ports/169466
Submitted by:   Joe Barbish <qjail@a1poweruser.com> (maintainer)
Approved by:    culot (mentor)

17:50 crees 

Update to 1.3;

  Updated script so that the perluglyhack code is added to the end of
  qjail update -b logic

PR:             ports/166666
PR:             ports/166917
Submitted by:   Joe Barbish (maintainer)

18:43 jgh 

- Update to 1.2
- while here loop on install of man pages

Changed qjail to work with new path and single base
file install format now used in 9.0.

PR:     ports/165603
Submitted by:   maintainer, qjail@a1poweruser.com

11:58 crees 

Author silently changed distfile to correct manpage typos, chase distinfo.

PR:             ports/160645
Submitted by:   Joe Barbish <fbsd8@a1poweruser.com> (maintainer)

19:29 dhn 

- Update to 1.1

PR:             ports/160574
Submitted by:   Joe barbish <fbsd8@a1poweruser.com> (maintainer)

21:22 crees 

Qjail [ q = quick ] is a 4th generation wrapper for the basic chroot jail
system that includes security and performance enhancements. Plus a new level
of "user friendliness" enhancements dealing with deploying just a few jails or
large jail environments consisting of 100's of jails.

Qjail requires no knowledge of the jail command usage. It uses "nullfs" for
read-only system binaries, sharing one copy of them with all the jails.

Uses "mdconfig" to create sparse image jails. Sparse image jails provide a
method to limit the total disk space a jail can consume, while only occupying
the physical disk space of the sum size of the files in the image jail.

Ability to assign ip address with their network device name,
so aliases are auto created on jail start and auto removed on jail stop.

(Only the first 15 lines of the commit message are shown above )