non port: textproc/p5-PerlPoint-Package/Makefile |
SVNWeb
|
Number of commits found: 30 |
Wed, 7 Apr 2021
|
[ 08:09 Mathieu Arnold (mat) ] cf118cc (Only the first 10 of 8873 ports in this commit are shown above. )
One more small cleanup, forgotten yesterday.
Reported by: lwhsu
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Wed, 27 May 2020
|
[ 15:31 danfe ] (Only the first 10 of 23 ports in this commit are shown above. )
Sanitize COMMENT per Section 5.6 of the FreeBSD Porter's Handbook (part 4).
|
Mon, 20 May 2019
|
[ 13:04 mat ] (Only the first 10 of 70 ports in this commit are shown above. )
Remove Created by lines where I am the one.
|
Sat, 6 Oct 2018
|
[ 13:06 des ] (Only the first 10 of 2492 ports in this commit are shown above. )
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw)
|
Tue, 11 Apr 2017
|
[ 15:21 mat ] (Only the first 10 of 31 ports in this commit are shown above. )
Make defining both PORTVERSION and DISTVERSION a DEV_ERROR.
There are two cases:
- The upstream versionning is compatible with our versionning, or using
DISTVERSION's magic leads to a compatible PORTVERSION, use
DISTVERSION. If it is possible to use DISTVERSIONPREFIX and
DISTVERSIONSUFFIX to make it compatible, use them.
- The upstream versionning is not compatible with our versionning, and
DISTVERSION's magic does not lead to a correct PORTVERSION, then set
PORTVERSION to the equivalent of our versionning, and set DISTNAME.
It is possible to use a third variable where you store upstream's
version and use it to compute PORTVERSION and/or DISTNAME, like the
dns/bind9* ports do.
Sponsored by: Absolight
|
Fri, 1 Apr 2016
|
[ 14:25 mat ] (Only the first 10 of 2099 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight
|
Wed, 26 Nov 2014
|
[ 13:08 mat ] (Only the first 10 of 10077 ports in this commit are shown above. )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above )
|
Fri, 4 Jul 2014
|
[ 22:50 adamw ] (Only the first 10 of 34 ports in this commit are shown above. )
Remove NOPORTDOCS and NOPORTEXAMPLES.
|
Sun, 24 Nov 2013
|
[ 17:40 mat ] (Only the first 10 of 32 ports in this commit are shown above. )
- Wrap up cd && foo in parenthesis, it'd break with bmake -j
- Replace some FIND ... CPIO with COPYTREE_SHARE.
|
Thu, 7 Nov 2013
|
[ 03:52 vanilla ] (Only the first 10 of 572 ports in this commit are shown above. )
Support STAGEDIR.
|
Tue, 22 Oct 2013
|
[ 16:57 mat ] (Only the first 10 of 94 ports in this commit are shown above. )
Try and be consistent with what commands are silent and not in *install.
- MKDIR is silent
- ECHO is silent
- INSTALL_* are not silent
- CP/FIND/... are not silent
I fixed a few PORTDOCS misusage, I'll do a second pass.
With Hat: perl@
|
Sun, 22 Sep 2013
|
[ 18:05 bapt ] (Only the first 10 of 132 ports in this commit are shown above. )
Fix NO_STAGE attribution
|
Fri, 20 Sep 2013
|
[ 23:17 bapt ] (Only the first 10 of 1559 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)
|
Fri, 2 Aug 2013
|
[ 18:52 mat ] (Only the first 10 of 1871 ports in this commit are shown above. )
- Convert to new perl framework
- Trim Makefile header
- Remove MAKE_JOBS_SAFE=yes, it's the default.
|
Mon, 4 Jun 2012
|
[ 13:18 culot ] (Only the first 10 of 15 ports in this commit are shown above. )
- Remove SITE_PERL from *_DEPENDS
Submitted by: az@
|
Sat, 21 Jan 2012
|
[ 17:40 eadler ] (Only the first 10 of 1326 ports in this commit are shown above. )
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.
Explicit duplication > := > = and this just moves ports one step to the left
Approved by: portmgr
|
Sat, 16 Jan 2010
|
[ 14:45 kuriyama ] (Only the first 10 of 46 ports in this commit are shown above. )
- Remove unneeded dependencies which is in perl-5.8.9 dist from ports
maintained by (perl|ports|kuriyama)@FreeBSD.org.
- Targets are: Test::Simple, Digest::MD5, Locale-Maketext,
ExtUtils::MakeMaker, ExtUtils::ParseXS, File::Temp, Getopt::Long,
Encode, Digest, Pod::Parser, File::Spec.
|
Sun, 16 Aug 2009
|
[ 09:55 linimon ] (Only the first 10 of 154 ports in this commit are shown above. )
Reset mat@FreeBSD.org due to maintainer-timeouts and no response to email.
Hat: portmgr
|
Fri, 26 Oct 2007
|
[ 20:09 mat ]
Update to 0.45.2
|
Fri, 31 Aug 2007
|
[ 13:37 mat ] (Only the first 10 of 114 ports in this commit are shown above. )
Use the CPAN site macro.
Use DISTVERSION in place of DISTNAME where possible.
Remove perl 5.005 shims.
|
Thu, 4 Jan 2007
|
[ 13:56 mat ]
Update to 0.45
|
Wed, 14 Jun 2006
|
[ 14:49 mat ]
Update to 0.43
|
Mon, 21 Nov 2005
|
[ 17:57 mat ]
Update to 0.40
|
Sat, 11 Jun 2005
|
[ 16:13 skv ] (Only the first 10 of 144 ports in this commit are shown above. )
* reflect renaming on CPAN File-Spec to PathTools
+ add devel/p5-PathTools, remove devel/p5-File-Spec
+ update dependencies for all affected ports (make them unconditional),
bump PORTREVISION for these ports
module was renamed
* reflect renaming on CPAN PodParser to Pod-Parser
+ add textproc/p5-Pod-Parser, remove textproc/p5-PodParser
+ update dependencies for all affected ports (make them unconditional),
bump PORTREVISION for these ports
* for all changed ports make dependencies on File::Temp, Digest::MD5,
Storable unconditional
* remove 'CONFIGURE_ARGS= INSTALLDIRS=site' from Makefile's
(this variable is forced by bsd.port.mk now)
* update Class-Autouse to 1.17
* update POE-API-Hooks to 1.05
* make portlint happy (clean IGNORE, convert spaces to tabs and so on)
|
Thu, 12 Aug 2004
|
[ 12:48 mat ] (Only the first 10 of 27 ports in this commit are shown above. )
After devel/p5-File-Temp has gained an IGNORE for PERL_LEVEL > 500800, all
these ports were broken because they always depended on it. I've rearranged all
the dependencies to fit the new scheme.
|
Fri, 18 Jun 2004
|
[ 12:46 mat ]
use evil(tm) PORTDOCS
|
Tue, 8 Jun 2004
|
[ 13:36 mat ]
Fix doc install
|
[ 11:11 mat ]
Add docs
|
[ 10:03 mat ]
Add p5-PerlPoint-Package 0.39, PerlPoint is both a presentation and a
documentation toolset.
|
Number of commits found: 30 |