| non port: textproc/p5-Plucene/Makefile |
|
SVNWeb
|
Number of commits found: 28 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:23 Tobias C. Berner (tcberner) ] 5cf7e35 (Only the first 10 of 1452 ports in this commit are shown above. )
textproc: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Choe, Cheng-Dae" whitekid
* -
* <glewis@FreeBSD.org>
* <koshy@india.hp.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron Straup Cope
* Aaron Straup Cope <ascope@cpan.org>
* Ache
* Adam Herzog <adam@herzogdesigns.com>
* Adam Weinberger <adamw@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Fri, 26 Jun 2020
|
[ 11:55 sunpoet ]   (Only the first 10 of 61 ports in this commit are shown above. )
Move devel/p5-IO-stringy to devel/p5-IO-Stringy and update to 2.113
- Fix LICENSE_FILE
- Update pkg-descr
- Update WWW
- Bump PORTREVISION of dependent ports for dependency change
Changes: https://metacpan.org/changes/distribution/IO-Stringy
|
|
Sat, 6 Oct 2018
|
[ 13:06 des ] (Only the first 10 of 2492 ports in this commit are shown above. )
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw)
|
|
Mon, 10 Sep 2018
|
[ 11:17 des ] (Only the first 10 of 213 ports in this commit are shown above. )
Reassign all of tobez@'s p5 ports to perl@.
Approved by: tobez
|
|
Fri, 15 Sep 2017
|
[ 08:58 mat ] (Only the first 10 of 2495 ports in this commit are shown above. )
Fix license information for portgs that use "the same license as Perl".
Sponsored by: Absolight
|
|
Fri, 30 Jun 2017
|
[ 13:44 sunpoet ]
Remove Perl core modules
- While I'm here:
- Add LICENSE
- Add NO_ARCH
- Sort PLIST
- Bump PORTREVISION for dependency change
With hat: perl
|
|
Fri, 1 Apr 2016
|
[ 14:25 mat ] (Only the first 10 of 2099 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 26 Nov 2014
|
[ 13:08 mat ] (Only the first 10 of 10077 ports in this commit are shown above. )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 21 Jan 2014
|
[ 22:29 mat ] (Only the first 10 of 36 ports in this commit are shown above. )
* Convert to staging
* Add license
* pet portlint
Sponsored by: Absolight
|
|
Fri, 20 Sep 2013
|
[ 23:17 bapt ] (Only the first 10 of 1559 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)
|
|
Mon, 5 Aug 2013
|
[ 15:05 az ] (Only the first 10 of 214 ports in this commit are shown above. )
- Convert to new perl framework
- Trim Makefile header
Approved by: tobez@ (maintainer)
|
|
Sun, 3 Jun 2012
|
[ 05:56 az ] (Only the first 10 of 47 ports in this commit are shown above. )
- Remove SITE_PERL from *_DEPENDS
Approved by: maintainer (tobez@ via IM)
|
|
Sat, 21 Jan 2012
|
[ 17:40 eadler ] (Only the first 10 of 1326 ports in this commit are shown above. )
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.
Explicit duplication > := > = and this just moves ports one step to the left
Approved by: portmgr
|
|
Sat, 17 Sep 2011
|
[ 07:06 sunpoet ] (Only the first 10 of 152 ports in this commit are shown above. )
- Change PERL_CONFIGURE to "yes" for all values between 5.8.1+ and 5.8.9+
Suggested by: az
With hat: perl
|
|
Thu, 8 Sep 2011
|
[ 08:36 az ] (Only the first 10 of 97 ports in this commit are shown above. )
- Replace ../../authors in MASTER_SITE_SUBDIR with CPAN:CPANID macro.
See http://wiki.freebsd.org/Perl for details.
- Change maintainership from ports@ to perl@ for ports in this changeset.
With perl@ hat
|
|
Tue, 26 Jan 2010
|
[ 12:36 kuriyama ] (Only the first 10 of 20 ports in this commit are shown above. )
- Remove unneeded dependencies which is in perl-5.8.9 dist
(part 7).
Approved by: portmgr (itetcu)
|
|
Sat, 23 Jan 2010
|
[ 07:28 kuriyama ] (Only the first 10 of 20 ports in this commit are shown above. )
- Remove unneeded dependencies which is in perl-5.8.9 dist
(part 3).
Approved by: portmgr (itetcu)
|
|
Thu, 17 Apr 2008
|
[ 14:30 araujo ] (Only the first 10 of 2168 ports in this commit are shown above. )
- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.
PR: ports/122674
Submitted by: Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by: araujo (myself)
Approved by: portmgr (pav)
|
|
Sat, 8 Sep 2007
|
[ 01:06 linimon ] (Only the first 10 of 79 ports in this commit are shown above. )
Welcome bsd.perl.mk. Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.
Work done by: gabor
Sponsored by: Google Summer of Code 2007
Hat: portmgr
|
|
Fri, 22 Sep 2006
|
[ 12:28 tobez ]
Update to 1.25. Require 5.8.1 or higher.
|
|
Sat, 27 May 2006
|
[ 21:10 pav ]
- Chase move of p5-Encode-compat to converters category
Pointy hat to: pav
|
|
Sun, 11 Sep 2005
|
[ 12:07 tobez ]
Update to 1.24.
|
|
Sat, 11 Jun 2005
|
[ 16:13 skv ] (Only the first 10 of 144 ports in this commit are shown above. )
* reflect renaming on CPAN File-Spec to PathTools
+ add devel/p5-PathTools, remove devel/p5-File-Spec
+ update dependencies for all affected ports (make them unconditional),
bump PORTREVISION for these ports
module was renamed
* reflect renaming on CPAN PodParser to Pod-Parser
+ add textproc/p5-Pod-Parser, remove textproc/p5-PodParser
+ update dependencies for all affected ports (make them unconditional),
bump PORTREVISION for these ports
* for all changed ports make dependencies on File::Temp, Digest::MD5,
Storable unconditional
* remove 'CONFIGURE_ARGS= INSTALLDIRS=site' from Makefile's
(this variable is forced by bsd.port.mk now)
* update Class-Autouse to 1.17
* update POE-API-Hooks to 1.05
* make portlint happy (clean IGNORE, convert spaces to tabs and so on)
|
|
Tue, 25 Jan 2005
|
[ 14:07 tobez ]
Update to 1.21.
|
|
Thu, 20 Jan 2005
|
[ 09:21 tobez ]
Update to 1.20.
|
|
Thu, 29 Jul 2004
|
[ 09:58 tobez ]
Add textproc/p5-Plucene, a Perl port of the Java Lucene search engine.
|
Number of commits found: 28 |
As an Amazon Associate I earn from qualifying purchases.