| non port: textproc/raptor/Makefile |
|
SVNWeb
|
Number of commits found: 73 |
|
Sat, 30 Sep 2023
|
[ 02:23 Muhammad Moinur Rahman (bofh)  ]    0bd1f08
textproc/raptor: Remove expired port
2023-09-30 textproc/raptor: No new release in 10+ years and superseded by
2.0-branch, consider using textproc/raptor2
|
|
Sat, 12 Aug 2023
|
[ 21:08 Daniel Engberg (diizzy) ] ce4607a
textproc/raptor: Deprecate and set expiration date to 2023-09-30
No new release in 10+ years and superseded by 2.0-series available at
textproc/raptor2. No consumers in tree and upstream have posted
migration instructions.
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:23 Tobias C. Berner (tcberner) ] 5cf7e35 (Only the first 10 of 1452 ports in this commit are shown above. )
textproc: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Choe, Cheng-Dae" whitekid
* -
* <glewis@FreeBSD.org>
* <koshy@india.hp.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron Straup Cope
* Aaron Straup Cope <ascope@cpan.org>
* Ache
* Adam Herzog <adam@herzogdesigns.com>
* Adam Weinberger <adamw@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 10 Apr 2022
|
[ 19:11 Charlie Li (vishwin) ] d63665f (Only the first 10 of 892 ports in this commit are shown above. )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
|
|
Sat, 26 Mar 2022
|
[ 08:27 Matthias Fechner (mfechner) ] 247c7db (Only the first 10 of 867 ports in this commit are shown above. )
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Fri, 8 Nov 2019
|
[ 12:59 tobik ]   (Only the first 10 of 45 ports in this commit are shown above. )
textproc: Add missing USES={gnome,php}
|
|
Thu, 8 Dec 2016
|
[ 17:01 tijl ] (Only the first 10 of 47 ports in this commit are shown above. )
Remove libcurl.so.7 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps. Bump dependent ports that have not
been bumped since.
|
|
Fri, 1 Apr 2016
|
[ 14:25 mat ] (Only the first 10 of 2099 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 18 Feb 2015
|
[ 15:17 amdmi3 ]
- Strip libraries
|
|
Wed, 2 Jul 2014
|
[ 19:40 tijl ]
- Add USES=libtool to textproc/raptor and bump dependent ports
- Add DOCS option and install documentation in standard location
- Silence post-patch
|
|
Wed, 16 Apr 2014
|
[ 18:28 zeising ] (Only the first 10 of 1008 ports in this commit are shown above. )
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well (Only the first 15 lines of the commit message are shown above )
|
|
Sat, 1 Feb 2014
|
[ 19:04 makc ]
textproc/raptor: release maintainership, KDE ports don't depend on this port
|
|
Sun, 5 Jan 2014
|
[ 17:31 rakuco ]
- Support staging [1]
- Use the new LIB_DEPENDS syntax
Submitted by: Schaich Alonso <alonsoschaich@fastmail.fm> [1]
|
|
Fri, 20 Sep 2013
|
[ 23:17 bapt ] (Only the first 10 of 1559 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)
|
|
Thu, 11 Jul 2013
|
[ 16:26 sunpoet ] (Only the first 10 of 252 ports in this commit are shown above. )
- Update to 7.31.0
- Bump PORTREVISION for ftp/curl shlib change
- Add TEST_DEPENDS
- Convert to new options framework
- Adjust options:
- Add COOKIES
- Add CYASSL, NSS, POLARSSL, THREADED_RESOLVER, TLS_SRP [1]
- Add GSSAPI and SPNEGO [2]
- Remove KERBEROS4
- Rename LIBIDN to IDN
- Remove TRACKMEMORY [1]
- Sort option handler
- Add SLAVEDIRS: ftp/curl-hiphop
- Cosmetic change
- Cleanup Makefile header
- While I'm here, fix typo (PORTREVSION) in x11-wm/ede/Makefile
Changes: http://curl.haxx.se/changes.html
PR: ports/172325 (-exp run), ports/177369 (based on) [1]
Submitted by: Hirohisa Yamaguchi <umq@ueo.co.jp> [1], hrs (via email) [2]
Exp run by: miwi
|
|
Sun, 25 Mar 2012
|
[ 17:12 rakuco ]
Import patch from Debian that backports the fix for CVE-2012-0037 from 2.0.7.
This patch also happens to contain the curl fix in
patch-src_raptor_internal.h, which has thus been removed.
Bump PORTREVISION.
Security: CVE-2012-0037
Feature safe: yes
|
|
Fri, 9 Mar 2012
|
[ 08:13 sunpoet ]
- Revert previous commit about curl/types.h removal: ale@ has committed a patch
file already
Notified by: ale
Feature safe: yes
|
|
Thu, 8 Mar 2012
|
[ 08:04 sunpoet ] (Only the first 10 of 21 ports in this commit are shown above. )
- Fix build with curl 7.24.0: curl/types.h was removed (unused since Apr 2004)
Submitted by: sunpoet (myself)
Tested by: exp-run by linimon
Approved by: linimon (with portmgr hat)
|
|
Mon, 5 Mar 2012
|
[ 10:57 ale ]
- Fix build after recent curl update
- Remove unrecognized configure arg
|
|
Wed, 9 Nov 2011
|
[ 15:26 miwi ] (Only the first 10 of 250 ports in this commit are shown above. )
- Remove WITH_FBSD10_FIX, is no longer needed
|
|
Sat, 29 Oct 2011
|
[ 10:03 miwi ] (Only the first 10 of 18 ports in this commit are shown above. )
- Fix build on FreeBSD 10
Reported by: pointyhat
|
|
Sun, 16 Oct 2011
|
[ 22:55 avilla ] (Only the first 10 of 25 ports in this commit are shown above. )
- Stop installing the rapper binary with raptor and bump PORTREVISION.
- Update raptor2 to 2.0.4.
- Update rasqal to 0.9.27.
- Update redland to 1.0.14.
- Update redland-bindings to 1.0.13.1.
- Update shared-desktop-ontologies to 0.8.0. [1]
- Update soprano to 2.7.0 and disable clucene indexer.
- Update strigi to 0.7.6.
PR: 157022 [1]
Submitted by: rakuco [1]
|
|
Thu, 11 Aug 2011
|
[ 19:20 kwm ] (Only the first 10 of 543 ports in this commit are shown above. )
Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.
PR: ports/159624
Submitted by: Ruslan Mahmatkhanov <cvs-src@yandex.ru>
|
|
Tue, 11 May 2010
|
[ 12:23 fluffy ] (Only the first 10 of 21 ports in this commit are shown above. )
- Split redland to rasqal and redland itself libraries
- Update raptor to 1.4.21
- Update rasqal to 0.9.19
- Update redland to 1.0.10
- Update redland-bindings to 1.0.10.1
- Bump portrevision on depended ports
With hat on: kde@
|
|
Thu, 29 Apr 2010
|
[ 22:51 fluffy ]
- Add OPTIONS for mpfr/gmp for redland
- While here, pass raptor/redland maintainership to kde@ per maintainer's
request
PR: 146157
Submitted by: Kenyon Ralph <kenyon@kenyonralph.com>
Approved by: maintainer
|
|
Sat, 3 Apr 2010
|
[ 10:44 roam ] (Only the first 10 of 202 ports in this commit are shown above. )
Chase the ftp/curl shlib version bump.
|
|
Sat, 22 Aug 2009
|
[ 00:37 amdmi3 ] (Only the first 10 of 140 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with T,U,V
|
|
Sat, 16 May 2009
|
[ 22:47 miwi ]
- Update to 1.4.18
PR: 134159
Submitted by: Wen Heping <wenheping@gmail.com>
Approved by: maintainer
|
|
Fri, 23 Jan 2009
|
[ 15:43 roam ] (Only the first 10 of 182 ports in this commit are shown above. )
Bump the version of the curl shared library after the ftp/curl update
to 7.19.2.
Bump PORTREVISION, even on the ports that do not have a versioned
dependency, since the binaries will most probably still stop working.
|
|
Thu, 20 Mar 2008
|
[ 10:03 pav ] (Only the first 10 of 74 ports in this commit are shown above. )
- Remove USE_GETOPT_LONG which is a no-op since March 2007
|
|
Sat, 26 Jan 2008
|
[ 22:36 miwi ]
- Update to 1.4.16
PR: 119781
Submitted by: chuck@pkix.net (maintainer)
|
|
Mon, 23 Jul 2007
|
[ 09:36 rafan ] (Only the first 10 of 437 ports in this commit are shown above. )
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
|
|
Fri, 13 Jul 2007
|
[ 19:03 trasz ]
- Update to 1.4.15.
PR: ports/114537
Submitted by: trasz
Approved by: maintainer, miwi (mentor)
|
|
Wed, 13 Dec 2006
|
[ 12:41 roam ] (Only the first 10 of 107 ports in this commit are shown above. )
Update the ftp/curl port to 7.16.0.
Bump PORTREVISION of all dependent ports.
Fix the build errors in the few ports that still use the long deprecated,
and now obsoleted, cURL options.
Thanks to everyone who took the time to look over the patch!
Discussed on: -ports
|
|
Fri, 8 Dec 2006
|
[ 22:55 miwi ]
- Update to 1.4.13
PR: ports/106458
Submitted by: Charles Swiger <chuck@pkix.net> (maintainer)
|
|
Fri, 28 Jul 2006
|
[ 13:26 sat ]
- Fix MASTER_SITES
Pointy hat to: erwin
|
|
Tue, 2 May 2006
|
[ 12:50 erwin ]
- Update to 1.4.9
- Fix MASTER_SITES
PR: 96623
Submitted by: Ion-Mihai IOnut Tetcu <itetcu@people.tecnik93.com>
Approved by: maintainer
|
|
Thu, 23 Feb 2006
|
[ 10:40 ade ] (Only the first 10 of 2514 ports in this commit are shown above. )
Conversion to a single libtool environment.
Approved by: portmgr (kris)
|
|
Fri, 6 Jan 2006
|
[ 07:17 edwin ]
update port: textproc/raptor to v1.4.8
Update raptor port to latest version. Please note that the
diff is missing a SHA256 checksum (adding one would be good
:-).
PR: ports/91371
Submitted by: Charles Swiger <chuck@pkix.net>
|
|
Tue, 15 Nov 2005
|
[ 06:52 ade ] (Only the first 10 of 1438 ports in this commit are shown above. )
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
|
|
Wed, 12 Oct 2005
|
[ 19:24 erwin ]
Update to 1.4.7
PR: 87341
Submitted by: Charles Swiger <chuck@pkix.net> (maintainer)
|
|
Tue, 8 Feb 2005
|
[ 20:17 pav ]
- Update to 1.4.5
- Take maintainership
PR: ports/77242
Submitted by: Charles Swiger <chuck@pkix.net>
|
|
Sat, 8 Jan 2005
|
[ 16:41 krion ]
Update to version 1.4.3
PR: ports/75955
Submitted by: Ports Fury
|
|
Thu, 4 Nov 2004
|
[ 21:37 glewis ]
. Update to 1.4.2.
PR: 73476
Submitted by: Ports Fury
|
|
Mon, 1 Nov 2004
|
[ 18:21 krion ]
Update to version 1.4.1
PR: ports/73351
Submitted by: Ports Fury
|
|
Tue, 12 Oct 2004
|
[ 12:24 krion ]
Update to version 1.3.3
PR: ports/72329
Submitted by: Ports Fury
|
|
Sun, 25 Jul 2004
|
[ 16:24 krion ]
Update to version 1.3.2
PR: ports/69583
Submitted by: Ports Fury
|
|
Fri, 9 Jul 2004
|
[ 17:43 marcus ] (Only the first 10 of 489 ports in this commit are shown above. )
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
|
|
Sat, 26 Jun 2004
|
[ 15:37 pav ]
- Update to 1.3.1
PR: ports/68392
Submitted by: KATO Tsuguru <tkato432@yahoo.com>
|
|
Thu, 3 Jun 2004
|
[ 22:41 roam ] (Only the first 10 of 28 ports in this commit are shown above. )
Update ftp/curl to 7.12.0 and bump the shared library version in all
dependent ports.
|
|
Mon, 5 Apr 2004
|
[ 03:31 marcus ] (Only the first 10 of 575 ports in this commit are shown above. )
Chase the glib20 update, and bump all affected ports' PORTREVISIONs.
|
|
Sun, 14 Mar 2004
|
[ 06:17 ade ] (Only the first 10 of 945 ports in this commit are shown above. )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
|
|
Wed, 4 Feb 2004
|
[ 05:10 marcus ] (Only the first 10 of 1422 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
|
|
Mon, 26 Jan 2004
|
[ 20:23 krion ]
- Update to version 1.2.0
PR: ports/61956
Submitted by: Ports Fury
|
|
Sat, 3 Jan 2004
|
[ 00:05 pav ]
- Update to 1.1.0
PR: ports/60844
Submitted by: Vincent Tantardini <vinc@FreeBSD-fr.org>
|
|
Wed, 24 Sep 2003
|
[ 14:03 krion ]
- Update to version 1.0.0
PR: 56636
Submitted by: Ports Fury
|
|
Wed, 27 Aug 2003
|
[ 18:40 krion ]
- Update to version 0.9.12
PR: 56041
Submitted by: Ports Fury
|
|
Wed, 30 Jul 2003
|
[ 18:29 krion ]
* Update to version 0.9.11
PR: 55066
Submitted by: Ports Fury
Approved by: fjoe (mentor) (implicit)
|
|
Fri, 18 Apr 2003
|
[ 14:29 ijliao ]
upgrade to 0.9.10
|
|
Sat, 29 Mar 2003
|
[ 16:18 ijliao ]
upgrade to 0.9.9
|
|
Thu, 20 Feb 2003
|
[ 19:11 knu ] (Only the first 10 of 122 ports in this commit are shown above. )
De-pkg-comment.
|
|
Sat, 8 Feb 2003
|
[ 05:27 nork ] (Only the first 10 of 15 ports in this commit are shown above. )
Change CPPFLAGS+=/LDFLAGS+= to CPPFLAGS=/LDFLAGS=.
Submitted by: Ports Fury
|
|
Sun, 2 Feb 2003
|
[ 14:55 nork ]
Conditionalize libgnugetopt dependencies.
PR: ports/47758
Submitted by: Ports Fury
|
|
Fri, 3 Jan 2003
|
[ 19:08 ijliao ]
upgrade to 0.9.7
PR: 46425
Submitted by: Ports Fury
|
|
Sat, 23 Nov 2002
|
[ 08:36 nork ]
Ensure that libexpat is not detected.
PR: ports/45633
Submitted by: Ports Fury
|
|
Thu, 21 Nov 2002
|
[ 11:44 obraun ]
s/expat2/libxml2/ in LIB_DEPENDS to fix build on -current.
|
|
Mon, 18 Nov 2002
|
[ 22:16 obraun ]
Upgrade to 0.9.6.
PR: ports/45448
Submitted by: KATO Tsuguru <tkato@prontomail.com>
|
|
Tue, 17 Sep 2002
|
[ 07:41 kuriyama ] (Only the first 10 of 22 ports in this commit are shown above. )
Bump PORTREVISION and expat shlib.
|
|
Sun, 21 Jul 2002
|
[ 02:17 kuriyama ] (Only the first 10 of 21 ports in this commit are shown above. )
Bump portrevision (textproc/expat2 shlib bump).
|
|
Mon, 15 Jul 2002
|
[ 21:41 demon ]
Update to version 0.9.5.
PR: 40627
Submitted by: KATO Tsuguru <tkato@prontomail.com>
|
|
Thu, 22 Nov 2001
|
[ 10:02 ijliao ]
add raptor RDF Parser Toolkit for Redland
|
Number of commits found: 73 |
As an Amazon Associate I earn from qualifying purchases.