Number of commits found: 42

Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same

(Only the first 15 lines of the commit message are shown above )

textproc/scim:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip

- Stage support
- Cleanup

PR:		190780

Remove trailing whitespaces from category textproc

According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.

This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.

Approved by:    portmgr (bapt)

Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)

Add an explicit dependency on pkgconf

Approved by:	portmgr (bapt)

Finish converting textproc from WITHOUT_NLS to PORT_OPTIONS:MNLS

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

Bump PORTREVISION after DESKTOP_ENTRIES update

- update png to 1.5.10

Update to version 0.1.3.1

PR:             ports/164071
Submitted by:   maintainer

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

* Unbreaks startup from the command-line/menu due to wrong SCIM_LIBEXECDIR;
* Simplifies Makefile (removes many unnecessary directives and the patch);
* Adds documentation (README explains the syntax how to create custom tables);
* Adds DESKTOP_ENTRIES;
* Improves pkg-descr;
* Passes maintainership to the submitter.

PR:             140239
Submitted by:   Nikola Lecic <nikola.lecic@anthesphoria.net>

- Update to 0.1.2

PR:             ports/139861
Submitted by:   myself
Approved by:    miwi (mentor)

Reset chinsan@FreeBSD.org due to numerous maintainer-timeouts and no
response to email.

Hat:            portmgr

- Switch SourceForge ports to the new File Release System: categories starting
with T,U,V

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Fix plist after upgrading scim to 1.4.5.
scim-1.4.5 appended its version to the moduledir in scim.pc.

Approved by:    chinsan (maintainer)

Use libtool15 port instead of included version to avoid objformat a.out botch

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

Change the following ports to my FreeBSD.org email.
Approved by:    delphij (mentor)

archivers/pecl-bz2/Makefile
archivers/pecl-lzf/Makefile
archivers/pecl-rar/Makefile
audio/fapg/Makefile
audio/pecl-id3/Makefile
chinese/CJKUnifonts/Makefile
chinese/auto-tw-l10n/Makefile
chinese/dfsongsd/Makefile
chinese/fortunetw/Makefile
chinese/gcin/Makefile
chinese/joe/Makefile
chinese/joe2/Makefile

(Only the first 15 lines of the commit message are shown above )

- Add NLS knob.
- Update WWW.
- Bump portrevision.

PR:             ports/99948
Submitted by:   chinsan <chinsan.tw@gmail.com> (maintainer)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Update to 0.1.1
- Take maintainership

PR:             93036
Submitted by:   chinsan <chinsan dot tw AT gmail dot com>

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

SCIM updated to 1.4.2.
o Update scim 1.4.2. [1]
o Update skim 1.4.2. [1]
o Update scim-uim 0.1.4. [2]
o Bump PORTREVISION in scim related ports.

Approved by:    Jie Gao <gaoj@cpsc.ucalgary.ca> [1]
Approved by:    Seiya Yanagita <s_yanagita@ybb.ne.jp> [2]

- drop maintainership

PR:             85803
Submitted by:   chinsan <chinsan.tw@gmail.com>

o Update to 1.4.0.
o Chase bump libversion to slave ports .

PR:             ports/84247
Submitted by:   Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)

o Update
  ports/textproc/scim 1.2.0 --> 1.2.2
  ports/textproc/skim 1.2.0 --> 1.2.2
o Chase scim's library bump.

PR:             ports/80848
Submitted by:   Jie Gao <gaoj@cpsc.ucalgary.ca> (maintainer)

Fix building on 4-STABLE.

PR:             ports/80850
Submitted by:   maintainer

Add scim-input-pad 0.1.0, SCIM add-on to input various symbols with
on-screen pad.

PR:             ports/80747
Submitted by:   chinsan <chinsan@mail2000.com.tw>

Number of commits found: 42

8 vulnerabilities affecting 24 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2019-10-15 15:43:31