| non port: textproc/scim-kmfl-imengine/Makefile |
|
SVNWeb
|
Number of commits found: 36 |
|
Thu, 2 Mar 2023
|
[ 05:23 Tobias C. Berner (tcberner)  ]    fa81a4f (Only the first 10 of 1168 ports in this commit are shown above.  )
accessibility/at-spi2-core: update to 2.46.0
What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
interface.
What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).
What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments. (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:23 Tobias C. Berner (tcberner) ] 5cf7e35 (Only the first 10 of 1452 ports in this commit are shown above. )
textproc: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Choe, Cheng-Dae" whitekid
* -
* <glewis@FreeBSD.org>
* <koshy@india.hp.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron Straup Cope
* Aaron Straup Cope <ascope@cpan.org>
* Ache
* Adam Herzog <adam@herzogdesigns.com>
* Adam Weinberger <adamw@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Thu, 7 Nov 2019
|
[ 17:19 zeising ]  
Add USES=xorg USES=gl, ports categories t
Add USES=xorg and USES=gl to ports in categories starting with 't'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
|
|
Tue, 11 Sep 2018
|
[ 18:34 zeising ] (Only the first 10 of 331 ports in this commit are shown above. )
Change x11/xorgproto to become a build dep
Change x11/xorgproto to become a build time dependency when added to
USE_XORG. Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.
PR: 230909
Reviewed by: eadler
Approved by: portmgr (antoine)
Obtained
from: https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run: antoine
Differential Revision: https://reviews.freebsd.org/D16906
|
|
Tue, 31 Jul 2018
|
[ 18:41 zeising ] (Only the first 10 of 254 ports in this commit are shown above. )
Switch to xorgproto instead of individual packages
Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto. This update
tracks that change.
* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
instead depend on xorgproto. Bump portrevision.
* Delete the old *proto packages, update MOVED.
PR: 230023
Submitted by: zeising
Approved by: portmgr (antoine)
exp-run by: antoine
|
|
Fri, 1 Apr 2016
|
[ 14:25 mat ] (Only the first 10 of 2099 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight
|
[ 13:18 mat ] (Only the first 10 of 172 ports in this commit are shown above. )
Fixup some whitespace at the beginning of lines problems.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 25 Dec 2014
|
[ 20:54 bapt ] (Only the first 10 of 446 ports in this commit are shown above. )
Bump portrevision after png update
|
[ 19:04 antoine ] (Only the first 10 of 332 ports in this commit are shown above. )
Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade
|
|
Fri, 27 Jun 2014
|
[ 14:29 miwi ]
- Convert to autotools to uses
- Stage support
PR: 190771
|
|
Wed, 16 Apr 2014
|
[ 18:28 zeising ] (Only the first 10 of 1008 ports in this commit are shown above. )
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 22 Sep 2013
|
[ 18:05 bapt ] (Only the first 10 of 132 ports in this commit are shown above. )
Fix NO_STAGE attribution
|
|
Fri, 20 Sep 2013
|
[ 23:17 bapt ] (Only the first 10 of 1559 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)
|
|
Sun, 15 Sep 2013
|
[ 12:27 antoine ] (Only the first 10 of 11 ports in this commit are shown above. )
Add an explicit dependency on pkgconf
Approved by: portmgr (bapt)
|
|
Sat, 27 Apr 2013
|
[ 18:25 mva ] (Only the first 10 of 181 ports in this commit are shown above. )
- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig and
USE_GETTEXT=yes to USES=gettext while here
|
|
Wed, 24 Apr 2013
|
[ 18:10 ak ] (Only the first 10 of 1028 ports in this commit are shown above. )
- Convert USE_GETTEXT to USES (part 3)
Approved by: portmgr (bapt)
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Fri, 23 Sep 2011
|
[ 22:26 amdmi3 ] (Only the first 10 of 2369 ports in this commit are shown above. )
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
|
Sun, 29 May 2011
|
[ 13:28 wxs ] (Only the first 10 of 66 ports in this commit are shown above. )
- Patch SCIM KMFL engine (textproc/scim-kmfl-imengine) to use
the same neutral keyboard repository as textproc/ibus-kmfl does,
${LOCALBASE}/share/kmfl/. This approach is similar to m17n (its
keyboard databases, devel/m17n-db and textproc/m17n-contrib, are
shared between textproc/scim-m17n and textproc/ibus-m17n). This
patch also makes both these KMFL engine ports to read ~/.kmfl/
instead of SCIM-oriented ~/.scim/kmfl/.
There is UPDATING text that informs KMFL users about this.
- Patch keyboard ports (7 of them) to install data to the new
repository, ${LOCALBASE}/share/kmfl/; the keyboard ports were
SCIM-only and used to install to ${LOCALBASE}/share/scim/kmfl/.
- Adapt descriptions in other KMFL ports (textproc/kmflcomp,
textproc/libkmfl);
- While we are here, do some additional maintenance.
- Remove the 7 old ports.
- Please see the PR for full details.
PR: ports/156694
Submitted by: Nikola Lecic <nikola.lecic@anthesphoria.net> (maintainer)
|
|
Sat, 4 Dec 2010
|
[ 07:34 ade ] (Only the first 10 of 1730 ports in this commit are shown above. )
Sync to new bsd.autotools.mk
|
|
Sat, 19 Jun 2010
|
[ 14:33 wxs ]
Update to 0.9.9
PR: ports/147691
Submitted by: Nikola Lecic <nikola.lecic@anthesphoria.net> (maintainer)
Feature safe: yes
|
|
Mon, 31 May 2010
|
[ 02:01 ade ] (Only the first 10 of 1416 ports in this commit are shown above. )
Bounce PORTREVISION for gettext-related ports. Have fun, ya'll.
|
|
Sun, 28 Mar 2010
|
[ 06:47 dinoex ] (Only the first 10 of 4470 ports in this commit are shown above. )
- update to 1.4.1
Reviewed by: exp8 run on pointyhat
Supported by: miwi
|
|
Fri, 5 Feb 2010
|
[ 11:46 dinoex ] (Only the first 10 of 4271 ports in this commit are shown above. )
- update to jpeg-8
|
|
Sat, 28 Nov 2009
|
[ 20:39 miwi ]
* Fixes hardcoded path to scim-launcher;
* Forces recompile due to this amd amd64-related fix of kmflcomp/libkmfl.
* While here pet portlint
PR: 140909
Submitted by: Nikola Lecic <nikola.lecic@anthesphoria.net> (maintainer)
|
|
Sat, 22 Aug 2009
|
[ 00:37 amdmi3 ] (Only the first 10 of 140 ports in this commit are shown above. )
- Switch SourceForge ports to the new File Release System: categories starting
with T,U,V
|
|
Sun, 2 Aug 2009
|
[ 19:36 mezz ] (Only the first 10 of 1514 ports in this commit are shown above. )
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
|
|
Fri, 31 Jul 2009
|
[ 13:57 dinoex ] (Only the first 10 of 3009 ports in this commit are shown above. )
- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by: edwin
|
|
Fri, 3 Jul 2009
|
[ 13:48 wxs ]
- Update to 0.9.8
- Fix MASTER_SITES
PR: ports/136149
Submitted by: Nikola Lecic <nikola.lecic@anthesphoria.net>
|
|
Thu, 8 Jan 2009
|
[ 16:24 pav ]
- USE_CONFIGURE is nothing, and USE_AUTOTOOLS imply GNU_CONFIGURE anyway
|
|
Thu, 21 Aug 2008
|
[ 06:18 rafan ] (Only the first 10 of 1030 ports in this commit are shown above. )
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 6 Jun 2008
|
[ 14:05 edwin ] (Only the first 10 of 221 ports in this commit are shown above. )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
|
|
Sat, 19 Apr 2008
|
[ 17:56 miwi ] (Only the first 10 of 2842 ports in this commit are shown above. )
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
|
|
Tue, 23 Oct 2007
|
[ 11:38 garga ]
KMFL aims to bring Tavultesoft Keyman functionality to *nix operating
systems. KMFL is being jointly developed by SIL International
(http://www.sil.org) and Tavultesoft (http://www.tavultesoft.com).
SCIM KMFL IMEngine allows you to use KMN keyboards (compiled with
textproc/kmflcomp) through standard SCIM interface.
The powerful KMN keyboard language supports contextual deadkeys,
pre- and post-processing of keystrokes, rules grouping, 'storing'
of character classes for use in similar rules, custom and Unicode
character constants, SIL Ethnologue language codes, etc.
Official Tavultesoft repository contains keyboards that cover more
than 220 languages. Significant number of them are open source.
Ported keyboards are textproc/scim-kmfl-*.
WWW: http://kmfl.sourceforge.net/
PR: ports/117170
Submitted by: Nikola Lecic <nikola.lecic at anthesphoria.net>
|
Number of commits found: 36 |
As an Amazon Associate I earn from qualifying purchases.