| non port: textproc/zorba/Makefile |
|
SVNWeb
|
Number of commits found: 79 |
|
Thu, 13 Apr 2023
|
[ 00:56 Jan Beich (jbeich)  ]    f1f1a8b (Only the first 10 of 214 ports in this commit are shown above.  )
devel/icu: update to 73.1
- Temporarily switch to GitHub auto archive (release artifacts are N/A atm)
Changes: https://github.com/unicode-org/icu/releases/tag/release-73-1
Reported by: GitHub (watch releases)
PR: 270422
Exp-run by: antoine
|
|
Sat, 14 Jan 2023
|
[ 23:08 Muhammad Moinur Rahman (bofh) ] 18c6e18 (Only the first 10 of 2869 ports in this commit are shown above. )
Mk/**ruby.mk: Switch from USE_RUBY=yes to USES=ruby
Switch from Mk/bsd.ruby.mk to Mk/Uses/ruby.mk
Notable changes are.
- Mk/bsd.ruby.mk is moved to Mk/Uses/ruby.mk.
- USE_RUBY=yes is replaced with USES=ruby.
- USE_RUBY_EXTCONF is replaced with USES=ruby:extconf.
- USE_RUBY_RDOC is replaced with USES=ruby:rdoc.
- USE_RUBY_SETUP is replaces with USES=ruby:setup.
- RUBY_NO_BUILD_DEPENDS and RUBY_NO_RUN_DEPENDS are replaced with
USES=ruby:{build,none,run}.
- RUBY_REQUIRE isn't used anywhere, so removed.
- USES=gem now implies USES=ruby.
This is mainly the work of yasu@ at https://reviews.freebsd.org/D27863
I have just made some cosmetic changes and ran exp-run to test that the
tree is not in a BROKEN state.
Approved by: portmgr
Differential Revision: https://reviews.freebsd.org/D37925
|
|
Wed, 19 Oct 2022
|
[ 08:10 Jan Beich (jbeich) ] dfe25d7 (Only the first 10 of 208 ports in this commit are shown above. )
devel/icu: update to 72.1
Changes: https://github.com/unicode-org/icu/releases/tag/release-72-1
Reported by: GitHub (watch releases)
PR: 266582
Exp-run by: antoine
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:23 Tobias C. Berner (tcberner) ] 5cf7e35 (Only the first 10 of 1452 ports in this commit are shown above. )
textproc: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Choe, Cheng-Dae" whitekid
* -
* <glewis@FreeBSD.org>
* <koshy@india.hp.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron Straup Cope
* Aaron Straup Cope <ascope@cpan.org>
* Ache
* Adam Herzog <adam@herzogdesigns.com>
* Adam Weinberger <adamw@FreeBSD.org> (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 10 Apr 2022
|
[ 19:11 Charlie Li (vishwin) ] d63665f (Only the first 10 of 892 ports in this commit are shown above. )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
|
|
Thu, 7 Apr 2022
|
[ 00:39 Jan Beich (jbeich) ] 268cee3 (Only the first 10 of 179 ports in this commit are shown above. )
devel/icu: update to 71.1
Changes: https://github.com/unicode-org/icu/releases/tag/release-71-1
Reported by: GitHub (watch releases)
PR: 262654
Exp-run by: antoine
Approved by: fluffy
|
|
Sat, 26 Mar 2022
|
[ 08:27 Matthias Fechner (mfechner) ] 247c7db (Only the first 10 of 867 ports in this commit are shown above. )
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
|
|
Fri, 29 Oct 2021
|
[ 09:50 Stefan Eßer (se) ] 819f25b (Only the first 10 of 388 ports in this commit are shown above. )
*/*: Remove redundant '-[0-9]*' from CONFLICTS
The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").
Many CONFLICTS definitions used patterns like "bash-[0-9]*" to filter
for the bash package in any version. But that pattern is functionally
identical with just "bash".
Approved by: portmgr (blanket)
|
|
Thu, 28 Oct 2021
|
[ 16:37 Jan Beich (jbeich) ] f34ece3 (Only the first 10 of 157 ports in this commit are shown above. )
devel/icu: update to 70.1
Changes: https://github.com/unicode-org/icu/releases/tag/release-70-1
Reported by: GitHub (watch releases)
PR: 258794
Exp-run by: antoine
|
|
Thu, 8 Apr 2021
|
[ 23:33 Jan Beich (jbeich) ] 69d24a7 (Only the first 10 of 145 ports in this commit are shown above. )
devel/icu: update to 69.1
Changes: https://github.com/unicode-org/icu/releases/tag/release-69-1
Reported by: GitHub (watch releases)
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Tue, 3 Nov 2020
|
[ 00:56 jbeich ]   (Only the first 10 of 186 ports in this commit are shown above. )
devel/icu: update to 68.1
Changes: http://site.icu-project.org/download/68
ABI: https://abi-laboratory.pro/tracker/timeline/icu4c/
Reported by: GitHub (watch releases)
|
|
Wed, 17 Jun 2020
|
[ 18:17 sunpoet ] (Only the first 10 of 84 ports in this commit are shown above. )
Move devel/swig30 to devel/swig and update to 4.0.1
- Do not silence installation message
- Update dependent ports:
- Fix build with swig 4.0.1
- Update *_DEPENDS
- Remove BINARY_ALIAS
Changes: http://www.swig.org/news.php
PR: 246613
Exp-run by: antoine
|
|
Thu, 23 Apr 2020
|
[ 20:14 jbeich ] (Only the first 10 of 130 ports in this commit are shown above. )
devel/icu: update to 67.1
Changes: http://site.icu-project.org/download/67
ABI: https://abi-laboratory.pro/tracker/timeline/icu4c/
Reported by: GitHub (watch releases)
|
|
Fri, 13 Mar 2020
|
[ 09:47 jbeich ] (Only the first 10 of 126 ports in this commit are shown above. )
devel/icu: update to 66.1
Changes: http://site.icu-project.org/download/66
ABI: https://abi-laboratory.pro/tracker/timeline/icu4c/
|
|
Fri, 8 Nov 2019
|
[ 12:59 tobik ] (Only the first 10 of 45 ports in this commit are shown above. )
textproc: Add missing USES={gnome,php}
|
|
Thu, 3 Oct 2019
|
[ 20:35 jbeich ] (Only the first 10 of 135 ports in this commit are shown above. )
devel/icu: update to 65.1
Changes: http://site.icu-project.org/download/65
ABI: https://abi-laboratory.pro/tracker/timeline/icu4c/
|
|
Fri, 26 Jul 2019
|
[ 20:46 gerald ] (Only the first 10 of 3853 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
|
|
Wed, 27 Mar 2019
|
[ 21:11 jbeich ] (Only the first 10 of 127 ports in this commit are shown above. )
devel/icu: update to 64.1
Changes: http://site.icu-project.org/download/64
ABI: https://abi-laboratory.pro/tracker/timeline/icu4c/
PR: 236325
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D19479
|
|
Tue, 5 Mar 2019
|
[ 21:20 antoine ] (Only the first 10 of 32 ports in this commit are shown above. )
Update devel/doxygen to 1.8.15
PR: 236110
|
|
Tue, 25 Dec 2018
|
[ 20:25 tcberner ] (Only the first 10 of 1277 ports in this commit are shown above. )
Change cmake default behaviour to outsource.
Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".
I tried to only set insource where explictely needed.
PR: 232038
Exp-run by: antoine
|
|
Wed, 12 Dec 2018
|
[ 01:35 gerald ] (Only the first 10 of 3168 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
|
|
Tue, 23 Oct 2018
|
[ 11:35 jbeich ] (Only the first 10 of 123 ports in this commit are shown above. )
devel/icu: update to 63.1
Changes: http://site.icu-project.org/download/63
ABI: https://abi-laboratory.pro/tracker/timeline/icu4c/
PR: 232300
Exp-run by: antoine
|
|
Sun, 29 Jul 2018
|
[ 22:18 gerald ] (Only the first 10 of 1480 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
|
|
Fri, 29 Jun 2018
|
[ 14:22 jbeich ] (Only the first 10 of 123 ports in this commit are shown above. )
devel/icu: update to 62.1
Changes: http://site.icu-project.org/download/62
ABI: https://abi-laboratory.pro/tracker/timeline/icu4c/
PR: 229359
Exp-run by: antoine (only 10.4)
|
|
Fri, 6 Apr 2018
|
[ 15:53 jbeich ] (Only the first 10 of 117 ports in this commit are shown above. )
devel/icu: update to 61.1
Changes: http://site.icu-project.org/download/61
ABI: https://abi-laboratory.pro/tracker/timeline/icu4c/
PR: 227042
Exp-run by: antoine
MFH: 2018Q2 (required by Firefox 61)
|
|
Wed, 4 Apr 2018
|
[ 10:11 jbeich ]
textproc/zorba: unbreak with ICU 61
In file included from src/functions/func_any_uri.cpp:27:
In file included from src/functions/func_any_uri.h:30:
In file included from src/functions/function_impl.h:25:
In file included from src/context/static_context.h:43:
In file included from src/zorbautils/hashmap_zstring.h:23:
src/util/utf8_util.h:784:22: error: unknown type name 'Collator'; did you mean
'UCollator'?
return static_cast<Collator*>( collation->getCollator() )->compare(us1, us2);
^~~~~~~~
UCollator
/usr/local/include/unicode/ucol.h:58:26: note: 'UCollator' declared here
typedef struct UCollator UCollator;
^
In file included from src/runtime/full_text/default_tokenizer.cpp:25:(Only the first 15 lines of the commit message are shown above )
|
|
Fri, 23 Feb 2018
|
[ 09:44 yuri ]
textproc/zorba: Fixed plist
Additional port changes:
* Added CATEGORIES=java
* Added LICENSE_FILE
* Added CONFLICTS_BUILD=bison
* Added USES=libedit
* Added MAKE_JOBS_UNSAFE
* Bumped PORTREVISION (new dependency libedit)
PR: 221998
Submitted by: groot@kde.org
Approved by: tcberner (mentor, implicit)
|
|
Fri, 19 Jan 2018
|
[ 21:28 antoine ] (Only the first 10 of 25 ports in this commit are shown above. )
Update devel/doxygen to 1.8.14
PR: 225290
Submitted by: Naram Qashat (maintainer)
|
|
Wed, 20 Dec 2017
|
[ 19:34 bapt ] (Only the first 10 of 13 ports in this commit are shown above. )
Switch from swig 2.0 to swig 3.0
|
|
Thu, 9 Nov 2017
|
[ 02:31 jbeich ] (Only the first 10 of 109 ports in this commit are shown above. )
devel/icu: update to 60.1
Changes: http://site.icu-project.org/download/60
ABI: https://abi-laboratory.pro/tracker/timeline/icu4c/
PR: 223373
Exp-run by: antoine
|
|
Mon, 6 Nov 2017
|
[ 16:06 mat ]
Those non default PYTHON options do not build/stage/package, mark them
BROKEN.
Sponsored by: Absolight
|
|
Mon, 25 Sep 2017
|
[ 00:02 jbeich ] (Only the first 10 of 111 ports in this commit are shown above. )
devel/icu: update to 59.1
- Temporarily keep C++98 working in consumers for Clang's default -std=
Changes: http://site.icu-project.org/download/59
PR: 218788
Submitted by: takefu@airport.fm, dcarmich@dcarmichael.net (early version)
Exp-run by: antoine
|
|
Fri, 22 Sep 2017
|
[ 10:48 mat ] (Only the first 10 of 38 ports in this commit are shown above. )
Cleanup after removal of libexecinfo from ports.
PR: 220271
Submitted by: mat (review), Yasuhiro KIMURA (PR)
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D11488
|
[ 10:48 mat ] (Only the first 10 of 175 ports in this commit are shown above. )
Remove USES=execinfo.
PR: 220271
Submitted by: mat (review), Yasuhiro KIMURA (PR)
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D11488
|
|
Sun, 10 Sep 2017
|
[ 20:55 gerald ] (Only the first 10 of 1201 ports in this commit are shown above. )
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
|
|
Tue, 29 Aug 2017
|
[ 11:15 amdmi3 ]
- Properly clean up all empty doc dirs
|
|
Sat, 1 Apr 2017
|
[ 15:23 gerald ] (Only the first 10 of 1118 ports in this commit are shown above. )
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
|
|
Mon, 19 Dec 2016
|
[ 16:10 mat ]
The DOCS option must not install doxygen.
Sponsored by: Absolight
|
|
Sat, 19 Nov 2016
|
[ 18:21 jbeich ] (Only the first 10 of 85 ports in this commit are shown above. )
devel/icu: update to 58.1
Changes: http://site.icu-project.org/download/58
PR: 214384
Exp-run by: antoine
Approved by: office (bapt)
|
|
Sat, 24 Sep 2016
|
[ 11:06 tijl ] (Only the first 10 of 110 ports in this commit are shown above. )
- Update devel/icu to 57.1.
- Clean up the Makefile.
- Follow some upstream recommendations (--with-data-packaging=archive,
--disable-renaming, -DICU_NO_USER_DATA_OVERRIDE).
- Patch makefiles to install static libraries with INSTALL_DATA so they
aren't stripped.
- Patch config/mh-bsd-gcc to sync with config/mh-linux-gcc.
- Fix endianness detection in ICU. The code wanted to use BYTE_ORDER
defined in machine/endian.h, but this isn't visible because ICU is
compiled with _XOPEN_SOURCE. Patch the code to use _BYTE_ORDER instead.
- Compile ICU with C++11 compiler to enable move constructors.
- Patch ICU to fix a problem with atomics in the case of a C++11 compiler
without C++11 header <atomic> (like Clang on FreeBSD 9).
- Bump all ports that depend on it due to library version change.
- Add USES=compiler:c++0x to some ports that pick up -std=c++0x from ICU
pkgconfig files.
- Add USES=compiler:c++11-lib to graphics/libcdr01 because it also needs
a C++11 runtime library now. Add this to all ports that depend on it
so their executables load the right libstdc++.so on FreeBSD 9.
PR: 205120
Exp-run by: antoine
Approved by: portmgr (antoine)
|
|
Fri, 9 Sep 2016
|
[ 19:42 amdmi3 ] (Only the first 10 of 100 ports in this commit are shown above. )
Most commonly used build systems support silent builds, when they
hide actual commands executed and only show short summary line (like
"CC foo.c"). CMake and ninja enable this by default, some autotools
using ports do as well. This is unacceptable because we need complete
build logs at any time, so we now switch to verbose build logs
unconditionally. Note that this change deliberately affects ALL
builds and not only package builds on cluster, because we need to
be sure that user experiencing failure can always provide informative
build log regardless of settings and without rerunning the build.
Change summary:
- Always do verbose builds for cmake, ninja and GNU configure (the
latter includes check if --disable-silent-rules is actually supported
by the configure script; there are isolated cases when it's not true) (Only the first 15 lines of the commit message are shown above )
|
|
Wed, 6 Jul 2016
|
[ 22:10 mat ] (Only the first 10 of 74 ports in this commit are shown above. )
Bump PORTREVISION for the icu revert.
This time not bumping lang/php70, but devel/php70-intl which is the one
really depending on icu.
PR: 205120
With hat: portmgr
Sponsored by: Absolight
|
[ 07:34 gahr ] (Only the first 10 of 64 ports in this commit are shown above. )
devel/icu: bump PORTREVISION on dependent ports
|
|
Thu, 30 Jun 2016
|
[ 20:02 adamw ]
Convert a couple ports that use both _CMAKE_ON and _CMAKE_OFF to _CMAKE_BOOL.
Use options helpers all the way in math/carve, because I couldn't help myself.
|
|
Tue, 28 Jun 2016
|
[ 14:00 mat ] (Only the first 10 of 246 ports in this commit are shown above. )
Convert USE_PHP*=yes into USES=php*
PR: 210529
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D6936
|
|
Fri, 1 Apr 2016
|
[ 14:25 mat ] (Only the first 10 of 2099 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.
With hat: portmgr
Sponsored by: Absolight
|
[ 13:18 mat ] (Only the first 10 of 172 ports in this commit are shown above. )
Fixup some whitespace at the beginning of lines problems.
With hat: portmgr
Sponsored by: Absolight
|
|
Sat, 23 Jan 2016
|
[ 19:26 rakuco ]
Remove BROKEN for FreeBSD 8, which is no longer supported.
|
|
Tue, 25 Aug 2015
|
[ 15:07 rakuco ]
Drop USES=iconv.
The port's build system only looks for iconv on Windows, and in any case the
code itself never uses it.
|
|
Fri, 5 Jun 2015
|
[ 16:32 amdmi3 ]
- Mark BROKEN on 8.x: does not build due to lack of strtoull
|
|
Thu, 23 Apr 2015
|
[ 21:26 bapt ] (Only the first 10 of 57 ports in this commit are shown above. )
Update icu to 55.1
|
|
Thu, 26 Mar 2015
|
[ 19:18 marino ]
textproc/zorba: Modernize options, support DragonFly
* Corrected an old-style LIB_DEPENDS callout
* Used OPTION_SUB (and adjusted pkg-plist as a consequence)
* Brought CMAKE args into options
* Used sed to allow building on DragonFly
* Fix swig build on F10+
* Fix no-docs option
|
|
Wed, 10 Dec 2014
|
[ 22:29 gahr ] (Only the first 10 of 129 ports in this commit are shown above. )
- Reset maintainership of my ports
|
|
Sun, 7 Dec 2014
|
[ 10:01 mva ] (Only the first 10 of 103 ports in this commit are shown above. )
- Convert textproc/ to USES=python
With hat: python@
|
|
Wed, 10 Sep 2014
|
[ 20:50 gerald ] (Only the first 10 of 3171 ports in this commit are shown above. )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
|
|
Fri, 8 Aug 2014
|
[ 13:29 gahr ]
- USES=execinfo
|
|
Sun, 3 Aug 2014
|
[ 14:15 olgeni ] (Only the first 10 of 119 ports in this commit are shown above. )
Remove indefinite articles and trailing periods from COMMENT, plus
minor COMMENT typos and surrounding whitespace fixes. A few Makefiles
where not included as they contain Latin-1 characters that break
the Phabricator workflow. Categories T-V.
CR: D509
Approved by: portmgr (antoine)
|
|
Thu, 24 Jul 2014
|
[ 13:24 gahr ]
- Respect LOCALBASE
|
|
Fri, 27 Jun 2014
|
[ 08:07 gahr ]
- STAGE-clean
- Fix build
|
|
Wed, 16 Apr 2014
|
[ 18:28 zeising ] (Only the first 10 of 1008 ports in this commit are shown above. )
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 7 Feb 2014
|
[ 11:44 bapt ] (Only the first 10 of 229 ports in this commit are shown above. )
Chase boost and icu bump
While here convert some LIB_DEPENDS
|
|
Mon, 30 Dec 2013
|
[ 20:55 ohauer ] (Only the first 10 of 238 ports in this commit are shown above. )
- rename AL2 to APACHE20 in Mk/bsd.licenses.db.mk
- svn move Templates/Licenses/AL2 Templates/Licenses/APACHE20
- add APACHE10 and APACHE11 to Mk/bsd.licenses.db.mk
- add entry in UPDATING
- bulk change all ports AL2 => APACHE20
- math/openfst/pkg-plist: remove share/licenses/openfst-1.3.4
PR: ports/184785
Submitted by: ohauer
Reviewed by: tabthorpe
Approved by: portmgr (tabthorpe@)
|
|
Fri, 20 Sep 2013
|
[ 23:17 bapt ] (Only the first 10 of 1559 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)
|
|
Thu, 11 Jul 2013
|
[ 16:26 sunpoet ] (Only the first 10 of 252 ports in this commit are shown above. )
- Update to 7.31.0
- Bump PORTREVISION for ftp/curl shlib change
- Add TEST_DEPENDS
- Convert to new options framework
- Adjust options:
- Add COOKIES
- Add CYASSL, NSS, POLARSSL, THREADED_RESOLVER, TLS_SRP [1]
- Add GSSAPI and SPNEGO [2]
- Remove KERBEROS4
- Rename LIBIDN to IDN
- Remove TRACKMEMORY [1]
- Sort option handler
- Add SLAVEDIRS: ftp/curl-hiphop
- Cosmetic change
- Cleanup Makefile header
- While I'm here, fix typo (PORTREVSION) in x11-wm/ede/Makefile
Changes: http://curl.haxx.se/changes.html
PR: ports/172325 (-exp run), ports/177369 (based on) [1]
Submitted by: Hirohisa Yamaguchi <umq@ueo.co.jp> [1], hrs (via email) [2]
Exp run by: miwi
|
|
Sat, 27 Apr 2013
|
[ 18:25 mva ] (Only the first 10 of 181 ports in this commit are shown above. )
- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig and
USE_GETTEXT=yes to USES=gettext while here
|
|
Wed, 17 Apr 2013
|
[ 08:08 gahr ]
- Add DOCS to OPTIONS_DEFINE
Reported by: tijl
Feature safe: yes
|
|
Tue, 2 Apr 2013
|
[ 10:04 gahr ]
- Fix DOCSDIR
- Use OPTIONS for DOCS
Approved by: portmgr
|
|
Fri, 22 Mar 2013
|
[ 20:06 makc ] (Only the first 10 of 464 ports in this commit are shown above. )
- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
for users
Approved by: portmgr (miwi)
|
|
Tue, 18 Dec 2012
|
[ 23:09 bapt ] (Only the first 10 of 34 ports in this commit are shown above. )
Chase icu, graphite2 and libexttextcat bump
|
|
Tue, 4 Dec 2012
|
[ 08:20 gahr ]
- Make sure we don't pick up the wrong xerces-c library version
Feature safe: yes
|
|
Mon, 5 Nov 2012
|
[ 13:10 gahr ]
- Update to 2.7.0
Release notes: http://www.zorba-xquery.com/html/entry/2012/09/26/Gaia
Feature safe: yes
|
|
Wed, 26 Sep 2012
|
[ 12:55 gahr ] (Only the first 10 of 20 ports in this commit are shown above. )
- Update to 2.6.0
ChangeLog: https://launchpadlibrarian.net/112669217/ChangeLog
- Trim Makefile header
|
|
Fri, 1 Jun 2012
|
[ 05:26 dinoex ] (Only the first 10 of 4371 ports in this commit are shown above. )
- update png to 1.5.10
|
|
Tue, 15 May 2012
|
[ 21:20 pav ]
- Unbreak when PORTREVISION != ""
Reported by: pointyhat
|
|
Mon, 9 Jan 2012
|
[ 15:41 tabthorpe ] (Only the first 10 of 107 ports in this commit are shown above. )
- The proper acronym for Apache Software License 2 is really AL2
- Thanks to crees@ for generating the initial patch
PR: ports/163521
Submitted by: Pedro Giffuni <pfg apache.org>
Hat: portmgr
Exp run by: pav
|
|
Wed, 30 Nov 2011
|
[ 15:34 gahr ] (Only the first 10 of 17 ports in this commit are shown above. )
- Update to 2.0.2
Changelog since 1.4.0
version 2.0.2
* Fixed bug #3401971 (node-by-reference on dynamic collections)
* documentation improvements
* installer improvements
* Fixed bug #3403291 (build for Fedora 15)
* Don't install the .so for test modules
* Fix for running ctest on Windows
version 2.0.1
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 14 Sep 2011
|
[ 07:38 gahr ] (Only the first 10 of 14 ports in this commit are shown above. )
- New port: textproc/zorba
Zorba is a general purpose XQuery processor implementing in C++ the W3C
family of specifications. The query processor has been designed to be
embeddable in a variety of environments such as other programming languages
extended with XML processing capabilities, browsers, database servers, XML
message dispatchers, or smartphones. Zorba can be accessed through APIs from
C, C++, Ruby, Python, Java, and PHP. Zorba runs on most platforms and is
available under the Apache license v2.
WWW: http://www.zorba-xquery.com
|
Number of commits found: 79 |
As an Amazon Associate I earn from qualifying purchases.