non port: www/domoticz/files/patch-CMakeLists.txt |
Number of commits found: 7 |
Thursday, 25 May 2023
|
09:41 Robert Clausecker (fuz)
www/domoticz: update to 2023.1
Upstream changes:
- Implemented: Accept JWT tokens as authentication and Authorization Bearer
tokens (either from internal or external IAM service)
- Implemented: Blinds, added option to schedule 0%
- Implemented: dzVents, OpenURL PATCH method
- Implemented: Enphase, redesign and added battery readings (Supports firmware
V7)
- Implemented: Internal OAuth2/OIDC IAM service supporting 4 different flows
(OAuth2 (RFC6749), PKCE extension (RFC7636) and JWT Tokens (RFC7519))
- Implemented: MQTT, added support for Lock status
- Implemented: MQTT, added support for wildcards in discovery topics
- Implemented: MQTT, climate preset mode
- Implemented: New 'auth' debug flag to see IAM related messages
- Implemented: Now 'Applications' can be registered to get secure access to
Domoticz, see 'setup' menu (standard DomoticzUI app is registered by default)
- Implemented: P1 Meter, added number of (long) power failures, voltage
sags/swells
- Implemented: SECURITY_SETUP.md describing the new/improved security setup
- Implemented: Support for basic OpenID Connect Discovery
('https://<DOMOTICZURL>/.well-known/openid-configuration')
- Implemented: Search option in Switches/Scenes/Temperature/Utility and Weather
tab
- Implemented: The Security realm can be configured using the 'vhostname' option
(default domoticz.com)
- Implemented: Timer, Grid option for selected switches and thermostat. Big
thanks to syrhus/labelette91580 and xbeaudouin
- Implemented: User device selection now displays type/subtype
- Changed: All security related setting are now in 1 settings tab
- Changed: By default prompt for login to only allow secure access
- Changed: Default 'admin' user is generated with standard password (see Users)
- Changed: Dimmer, restores to previous Set Level state after Off
- Changed: Implicit adding local IP to 'trusted networks' has been removed.
Needs to be set explicitly for security reasons!
- Changed: Lots of security related code cleanup and improvements
- Changed: Menu option for 'Users' moved to main 'Setup' menu list
- Changed: MQTT timeout increased to 2 minutes
- Changed: The following proxy headers are now properly supported 'Forwarded'
(RFC7239), 'X-Forwarder-For' and 'X-Real-IP' (in that order)
- Changed: The secure server (HTTPS) sends proper CORS and Security headers
- Fixed: Dashboard, scenes/lights hidden when this was disabled in user settings
- Fixed: Dashboard, mobile display did not display P1 meter current return value
correctly
- Fixed: Dashboard, not showing disabled sections (temperature/weather/utility)
when a device has multiple properties (for instance temperature + weather)
- Fixed: Highcharts dropdown menu z-index problem
- Fixed: Logout now returns 204 instead of 401
- Fixed: Waterflow sensor custom icon
- Fixed: Making sure Custom icons are valid (when someone manually edits the
database)
- Fixed: Mobile display text objects with long lines
- Fixed: MQTT-AD Climate, fixed setpoint temperature display
- Fixed: Navigation bar display issues on some mobile devices
- Fixed: Setpoint popup when using protection
Version 2022.2 (November 5 2022)
- Implemented: Blockly, added 'Toggle' set command
- Implemented: Camera, camera Aspect Ratio
- Implemented: Commandline option '-weblog <weblogfile>' which creates Apache
Combined Logformat logs containg all webrequests
- Implemented: Counters, support for larger counter values/usage
- Implemented: Dashboard, temperature Trend indication
- Implemented: Docker startup script (for instance to install additional
packages)
- Implemented: EcoDevices, complete support for EcoDevices RT2 with firmware
3.00.xx
- Implemented: FritzBox, more statistics
- Implemented: Fritzbox, up/download statistics
- Implemented: MQTT Auto Discovery Protocol (Zigbee2MQTT/ Z-Wave JS UI)
- Implemented: P1 Meter, added Current L1/L2/L3 sensor for delivered
- Implemented: Philips Hue, support color change on some vendors bulb (like
LIDL)
- Implemented: RFXCom, added internal support for Novy Mood, Level Sensor
- Implemented: SolarEdge, more sensors support
- Implemented: UVI device, added multiply field to widget
- Implemented: Xiaomi Gateway, new model for wired single key switch
- Updated: Mercedes EV, new Token URL (changed November 2022)
- Changed: All inverted Blinds types should not be used anymore, instead use the
regular blinds and set the needed Reverse option
- Changed: Blinds working (see https://www.domoticz.com/wiki/Blinds)
- Changed: Energy devices have more precision
- Changed: kWh devices MAX Power per phase from 10000 to 18400 (230V*80A)
- Changed: P1 Meter, changed P1 Max W from 17250 (25A) to 55200 (80A)
- Changed: P1 Meter, speed up CRC calculation
- Changed: Webserver, removing AppCache, switching to service worker
- Fixed: Blockly, keeping last dim level when switching OFF, option for Close
state
- Fixed: Counter incremental, counter in report (when used with meter offset)
- Fixed: Counter short-term log 1 hour offset
- Fixed: Counters, rounding (number of decimals) in GUI
- Fixed: Crash when secure webserver could not start and applying settings
- Fixed: Dimmer, better handling of last dimmer level when switching on/off
- Fixed: EvoHome, correct state/mode for EvoHome type
- Fixed: Floorplan, custom utility icons corrected in Floorplan
- Fixed: Floorplan, fixed blinds state icon/switching
- Fixed: Floorplan, making sure the Door Lock is switchable in the Floorplan
- Fixed: Floorplans, fixed issues with the displaying of some icons
- Fixed: Notification system, prevent double start
- Fixed: P1 Meter, fix for Sibelga smart meters that use a too long string as an
identifier
- Fixed: RFXCom, corrected RFXCom solar sensor reading
- Fixed: Temperature, corrected chill calculation
- Fixed: WebGUI, making sure status does not wrap in mobile mode
- Removed: AppCache
- Deprecated: OpenZWave, please move to MQTT Auto Discovery and ZWave JS UI
(Project stopped a long time ago!)
PR: 271603
5614e7e |
Tuesday, 26 May 2020
|
20:01 samm
www/domoticz: Update to 2020.2
- Make LUA as hard dependency as internal LUA is not supported anymore
- Make OPENZWAVE optional dependency
- Enable usage of precompiled headers by default to follow the upstream
- Use GH_TUPLE to load external dependencies from the github (upstream uses git
submodules), disable GIT_SUBMODULE. As for now only MQQT is supported
- Fix CMAKE_INSTALL_PREFIX (should be specified as Makefile option, not as CMAKE
one) and remove patches obsoleted by that fix
- USE CMAKE_ON/CMAKE_OFF for the better readability
- Remove `post-patch` target, as version is normally set by the cmake itself
- Include patches for the embedded `mosquitto`, disable mosquitto shared
libraries
installation
- Update `pkg-plist` to support files added by the embedded dependencies
- Remove `CONFLICTS` as there are no such matched packages in the ports tree
- Fix build without PYTHON, patch accepted by the upstream
- Remove most of the STATIC* options
ChangeLog: https://github.com/domoticz/domoticz/blob/development/History.txt
PR: 245007
Approved by: krion (mentor)
Differential Revision: https://reviews.freebsd.org/D24984
|
Tuesday, 26 Jun 2018
|
00:04 swills
www/domoticz: update to 4.9700
PR: 229333
Submitted by: kiwi@oav.net (maintainer) (with changes)
|
Monday, 5 Mar 2018
|
02:06 jbeich
www/domoticz: regen patches via "make makepatch"
PR: 224181
Submitted by: Xavier Beaudouin (maintainer)
|
Friday, 18 Aug 2017
|
03:14 swills
www/domoticz: Update to 3.8153
PR: 221118
Submitted by: kiwi@oav.net (maintainer)
|
Tuesday, 27 Dec 2016
|
20:59 matthew
Update to 3.5877
* Add OPTIONS to toggle between ports ad bundled versions of various libs
* Drop GH_TAGNAME since we're using a release version
* Various changes to mollify portlint:
- Regenerated files/patch-* using 'make makepatch'
* Add USES=ssl
PR: 215439
Submitted by: kiwi@oav.net (maintainer)
|
Tuesday, 26 Jan 2016
|
15:15 amdmi3
Domoticz is a Home Automation System that lets you monitor and configure
various devices like: Lights, Switches, various sensors/meters like
Temperature, Rain, Wind, UV, Electra, Gas, Water and much more.
Notifications/Alerts can be sent to any mobile device
WWW: http://www.domoticz.com/
PR: 205583
Submitted by: kiwi@oav.net
| Number of commits found: 7 |
|