non port: www/p5-HTML-TokeParser-Simple/Makefile |
SVNWeb
|
Number of commits found: 21 |
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
Wed, 20 Jul 2022
|
[ 14:23 Tobias C. Berner (tcberner) ] e915e75 (Only the first 10 of 1623 ports in this commit are shown above. )
www: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
*
* <hvo.pm@xs4all.nl>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron LI <aly@aaronly.me>
* Aaron Zauner <az_mail@gmx.at>
* Abel Chow <achow@transoft.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Adrian Steinmann <ast@marabu.ch>
* Akinori MUSHA aka knu <knu@idaemons.org> (Only the first 15 lines of the commit message are shown above )
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
Sat, 6 Oct 2018
|
[ 13:06 des ] (Only the first 10 of 2492 ports in this commit are shown above. )
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw)
|
Tue, 11 Sep 2018
|
[ 09:08 amdmi3 ]
- Add LICENSE
- Add NO_ARCH
Approved by: portmgr blanket
|
Fri, 1 Apr 2016
|
[ 14:33 mat ] (Only the first 10 of 2136 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.
With hat: portmgr
Sponsored by: Absolight
|
Wed, 26 Nov 2014
|
[ 13:08 mat ] (Only the first 10 of 10077 ports in this commit are shown above. )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above )
|
Thu, 7 Nov 2013
|
[ 13:55 vanilla ] (Only the first 10 of 112 ports in this commit are shown above. )
support STAGEDIR.
|
Fri, 20 Sep 2013
|
[ 23:36 bapt ] (Only the first 10 of 2206 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
www)
|
Fri, 2 Aug 2013
|
[ 18:52 mat ] (Only the first 10 of 1871 ports in this commit are shown above. )
- Convert to new perl framework
- Trim Makefile header
- Remove MAKE_JOBS_SAFE=yes, it's the default.
|
Fri, 28 Jun 2013
|
[ 02:37 clsung ]
- Update to 3.16
|
Tue, 5 Jun 2012
|
[ 07:44 az ] (Only the first 10 of 15 ports in this commit are shown above. )
- Remove SITE_PERL from *_DEPENDS
|
Sat, 21 Jan 2012
|
[ 17:40 eadler ] (Only the first 10 of 1326 ports in this commit are shown above. )
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.
Explicit duplication > := > = and this just moves ports one step to the left
Approved by: portmgr
|
Sun, 12 Dec 2010
|
[ 21:34 pgollucci ]
- Pass to perl@
|
Tue, 29 Apr 2008
|
[ 05:27 linimon ] (Only the first 10 of 193 ports in this commit are shown above. )
Reset aaron's port maintainerships due to many maintainer-timeouts.
|
Thu, 17 Apr 2008
|
[ 14:30 araujo ] (Only the first 10 of 2168 ports in this commit are shown above. )
- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.
PR: ports/122674
Submitted by: Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by: araujo (myself)
Approved by: portmgr (pav)
|
Sat, 8 Sep 2007
|
[ 01:11 linimon ] (Only the first 10 of 117 ports in this commit are shown above. )
Welcome bsd.perl.mk. Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.
Work done by: gabor
Sponsored by: Google Summer of Code 2007
Hat: portmgr
|
Sun, 4 Jun 2006
|
[ 23:56 aaron ]
- Update from v3.14 to v3.15
- Restrict to Perl 5.6+ due to dependency upon www/p5-HTML-Parser
- Take maintainership
3.15 2005-11-29
Fixed bug where rewrite_tag would unescape entities. Thanks to "Paul
Bijnens" <paul.bijnens@xplanation.com> for the bug report and fix.
PR: ports/98336
Submitted by: aaron
Reviewed by: maintainer
Approved by: maintainer, tobez (implicit)
|
Tue, 18 Oct 2005
|
[ 13:42 erwin ]
Update to 3.14
PR: 87608
Submitted by: Lars Eggert <lars.eggert@gmx.net> (maintainer)
|
Thu, 10 Feb 2005
|
[ 06:16 leeym ]
- Update to 3.13
PR: 75805
Submitted by: Lars Eggert <lars.eggert at gmx.net>
|
Thu, 6 May 2004
|
[ 12:34 mat ]
Add p5-HTML-TokeParser-Simple 2.2, subclass of HTML::TokeParser with
easy-to-remember method calls.
PR: ports/65709
Submitted by: Lars Eggert <lars.eggert@gmx.net>
|
Number of commits found: 21 |