| non port: www/p5-TestGen4Web-Runner/Makefile |
|
SVNWeb
|
Number of commits found: 20 |
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se)  ]    b7f0544 (Only the first 10 of 27931 ports in this commit are shown above.  )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:23 Tobias C. Berner (tcberner) ] e915e75 (Only the first 10 of 1623 ports in this commit are shown above. )
www: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
*
* <hvo.pm@xs4all.nl>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron LI <aly@aaronly.me>
* Aaron Zauner <az_mail@gmx.at>
* Abel Chow <achow@transoft.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Adrian Steinmann <ast@marabu.ch>
* Akinori MUSHA aka knu <knu@idaemons.org> (Only the first 15 lines of the commit message are shown above )
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Sat, 6 Oct 2018
|
[ 13:06 des ]   (Only the first 10 of 2492 ports in this commit are shown above. )
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw)
|
|
Fri, 1 Apr 2016
|
[ 14:33 mat ] (Only the first 10 of 2136 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.
With hat: portmgr
Sponsored by: Absolight
|
|
Thu, 14 May 2015
|
[ 10:15 mat ] (Only the first 10 of 1814 ports in this commit are shown above. )
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
|
|
Wed, 26 Nov 2014
|
[ 13:08 mat ] (Only the first 10 of 10077 ports in this commit are shown above. )
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above )
|
|
Sun, 5 Jan 2014
|
[ 13:05 az ] (Only the first 10 of 197 ports in this commit are shown above. )
- stage support
Approved by: portmgr (blanket infrastructure)
|
|
Fri, 20 Sep 2013
|
[ 23:36 bapt ] (Only the first 10 of 2206 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
www)
|
|
Mon, 2 Sep 2013
|
[ 11:04 az ] (Only the first 10 of 19 ports in this commit are shown above. )
- convert to the new perl5 framework
Approved by: portmgr (bapt@, blanket)
|
|
Sat, 30 Jun 2012
|
[ 14:31 az ] (Only the first 10 of 57 ports in this commit are shown above. )
- Remove SITE_PERL from *_DEPENDS
Approved by: portmgr@ (bapt@)
|
|
Sat, 21 Jan 2012
|
[ 17:40 eadler ] (Only the first 10 of 1326 ports in this commit are shown above. )
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.
Explicit duplication > := > = and this just moves ports one step to the left
Approved by: portmgr
|
|
Mon, 25 Jan 2010
|
[ 14:00 kuriyama ] (Only the first 10 of 20 ports in this commit are shown above. )
- Remove unneeded dependencies which is in perl-5.8.9 dist
(part 5).
Approved by: portmgr (itetcu)
|
|
Thu, 17 Sep 2009
|
[ 21:31 linimon ]
Over to new volunteer.
Feature safe: yes
|
|
Wed, 16 Sep 2009
|
[ 22:34 linimon ]
Reset ports@mcdermottroe.com at his request due to lack of time at the
moment.
Hat: portmgr
Feature safe: yes
|
|
Thu, 12 Mar 2009
|
[ 16:43 miwi ]
- Update to 0.11
PR: 131947
Submitted by: Edmondas Girkantas <eg@fbsd.lt>
Approved by: maintainer timeout
|
|
Thu, 17 Apr 2008
|
[ 14:30 araujo ] (Only the first 10 of 2168 ports in this commit are shown above. )
- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.
PR: ports/122674
Submitted by: Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by: araujo (myself)
Approved by: portmgr (pav)
|
|
Sat, 8 Sep 2007
|
[ 01:11 linimon ] (Only the first 10 of 117 ports in this commit are shown above. )
Welcome bsd.perl.mk. Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.
Work done by: gabor
Sponsored by: Google Summer of Code 2007
Hat: portmgr
|
|
Wed, 2 Aug 2006
|
[ 04:14 rafan ]
- Update to 0.08
PR: ports/101198
Submitted by: Conor McDermottroe <ports at mcdermottroe.com> (maintainer)
|
|
Sun, 25 Jun 2006
|
[ 11:04 erwin ]
TestGen4Web::Runner is a PERL module to replay files recorded with
SpikeSource's TestGen4Web Recorder.
From http://developer.spikesource.com/projects/testgen4web :
"TestGen4Web is written to ease the pain of writing tests for web applications.
This is a 2 part tool. Firefox extension, which records user input to a xml
file. Translator script: to generate automated test scripts."
WWW: http://search.cpan.org/dist/TestGen4Web-Runner/
PR: ports/98915
Submitted by: Conor McDermottroe <ports@mcdermottroe.com>
|
Number of commits found: 20 |
As an Amazon Associate I earn from qualifying purchases.