| non port: www/py-django-filer/Makefile |
|
SVNWeb
|
Number of commits found: 19 |
|
Wed, 11 Jan 2023
|
[ 15:58 Dmitry Marakasov (amdmi3)  ]    77d6847 (Only the first 10 of 3335 ports in this commit are shown above.  )
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt
|
|
Wed, 7 Sep 2022
|
[ 21:10 Stefan Eßer (se) ] b7f0544 (Only the first 10 of 27931 ports in this commit are shown above. )
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
|
|
Wed, 20 Jul 2022
|
[ 14:23 Tobias C. Berner (tcberner) ] e915e75 (Only the first 10 of 1623 ports in this commit are shown above. )
www: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
*
* <hvo.pm@xs4all.nl>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron LI <aly@aaronly.me>
* Aaron Zauner <az_mail@gmx.at>
* Abel Chow <achow@transoft.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Adrian Steinmann <ast@marabu.ch>
* Akinori MUSHA aka knu <knu@idaemons.org> (Only the first 15 lines of the commit message are shown above )
|
|
Thu, 28 Apr 2022
|
[ 10:02 Kai Knoblich (kai) ] 0cf5531 (Only the first 10 of 81 ports in this commit are shown above. )
www/py-django32: Switch consumers over to Django 3.2
Django 2.2 became End-of-Life on 11th April 2022 and Django 3.2 is the
new LTS (= Long Term Support) release which will be supported until
April 2024.
* Switch the most ports that use www/py-django22 to www/py-django32
* Switch www/seahub over to www/py-djangorestframework
* Ports that are not yet ready for Django 3.2 (only three so far) or
those that have already been set with an expiration date were not
taken into account.
* Bump PORTREVISION due dependency change where necessary.
PR: 261313
Reviewed by: bofh, dvl, koobs, ultima
Approved by: bofh, dvl, koobs, ultima, sunpoet, Kevin Golding, Ivan Rozhuk,
Alexander Sieg (maintainers)
maintainer timeout (remaining maintainers)
Differential Revision: https://reviews.freebsd.org/D34859
|
|
Thu, 10 Feb 2022
|
[ 11:43 Kai Knoblich (kai) ] ae3632f
www/py-django-filer: Update to 2.1.2
Changelog:
https://github.com/django-cms/django-filer/compare/1.7.0...2.1.2
PR: 261478
Approved by: maintainer timeout (2+ weeks)
|
|
Tue, 6 Apr 2021
|
[ 14:31 Mathieu Arnold (mat) ] 305f148 (Only the first 10 of 29333 ports in this commit are shown above. )
Remove # $FreeBSD$ from Makefiles.
|
|
Thu, 23 Apr 2020
|
[ 10:53 kai ]  
www/py-django-filer: Update to 1.7.0
* Also assign the port to Django 2.2 because Django 1.11 is End-of-Life
since April.
* Do the the same for its dependencies and bump PORTREVISION
accordingly. [1] [2]
Changelog:
https://github.com/divio/django-filer/blob/1.7.0/CHANGELOG.rst
PR: 245470, 245472 [1] 245473 [2]
Approved by: maintainer timeout (14 days) [1],
Kevin Golding (maintainer) [2]
|
|
Sat, 11 Apr 2020
|
[ 10:15 kai ]
www/py-django_polymorphic: Rename to py-django-polymorphic, Update to 2.1.2
* Use this update, which introduced support for Django 2.2 in the 2.1.0
release, as preparation to switch from Django 1.11 (End-of-Life) to
Django 2.2 (current LTS release) once the update for www/py-django-filer
lands [1].
* Rename the port to match the canonical name at PyPI.
* Update the WWW field to spare users from redirects and fix a whitespace
issue in the pkg-descr.
* Bump PORTREVISION of its consumer www/py-django-filer due changed
dependencies.
Changelog:
https://github.com/django-polymorphic/django-polymorphic/blob/v2.1.2/docs/changelog.rst
PR: 245473, 245470 [1]
Approved by: Kevin Golding <ports@caomhin.org> (maintainer)
|
|
Tue, 24 Mar 2020
|
[ 19:54 antoine ] (Only the first 10 of 87 ports in this commit are shown above. )
Convert the tree to use PY_PILLOW
With hat: portmgr
Originally submitted by: kai
|
|
Mon, 24 Feb 2020
|
[ 11:36 kai ] (Only the first 10 of 76 ports in this commit are shown above. )
graphics/py-pillow: Update to 7.0.0
* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
dropped the support for Python 2.
* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
consumers that can be built for Python 2 or newer.
* Exceptions are ports that can be built only for either Python 2 or
Python 3. For the first case, consumers are just assigned to the
repo-copied graphics/py-pillow6.
* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
listed in setup.py as a build dependency [1] and relax the version (Only the first 15 lines of the commit message are shown above )
|
|
Mon, 21 May 2018
|
[ 16:02 miwi ]
- Update to 1.3.2
PR: 228136
Submitted by: freebsd_ports@k-worx.org
Approved by: maintainer
Sponsored by: iXsystems Inc.
|
|
Thu, 30 Nov 2017
|
[ 15:50 mat ] (Only the first 10 of 2423 ports in this commit are shown above. )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above )
|
|
Fri, 1 Apr 2016
|
[ 14:33 mat ] (Only the first 10 of 2136 ports in this commit are shown above. )
Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.
With hat: portmgr
Sponsored by: Absolight
|
|
Sat, 16 Jan 2016
|
[ 11:19 miwi ] (Only the first 10 of 41 ports in this commit are shown above. )
- Switch forgotten ports over to py-django18
- Fix PYTHON_PKGNAMEPREFIX
Reported by: antoinebot
|
[ 09:52 miwi ] (Only the first 10 of 51 ports in this commit are shown above. )
- Switch all ports to www/py-django18
- Bump PORTREVISION
|
|
Tue, 7 Oct 2014
|
[ 11:51 wg ]
www/py-django-filer: switch from py-imaging to py-pillow
- USES python
With hat: python
Approved by: portmgr (bdrewery, implicit)
|
|
Wed, 29 Jan 2014
|
[ 13:21 miwi ]
- Stage support
- Convert to PYDISTUTILS_AUTOPLIST
- Bump PORTREVISION
|
|
Fri, 20 Sep 2013
|
[ 23:36 bapt ] (Only the first 10 of 2206 ports in this commit are shown above. )
Add NO_STAGE all over the place in preparation for the staging support (cat:
www)
|
|
Thu, 28 Jun 2012
|
[ 02:27 sunpoet ]
- Add py-django-filer 0.8.6
django-filer is a file management application for django. It handles
uploading and organizing files and images in contrib.admin.
WWW: http://pypi.python.org/pypi/django-filer/
WWW: https://github.com/stefanfoulis/django-filer
PR: ports/169249
Submitted by: Matthew X. Economou <xenophon+fbsdports@irtnog.org>
|
Number of commits found: 19 |
As an Amazon Associate I earn from qualifying purchases.