17:05 tobik 

Clean up some things

Reported by:	portscan (some of it)

 

14:17 matthew 

Add mention of the new www/rt50 port explicitly to the deprecation
message at the request of the www/rt50 maintainer.

Reported by:	mikael urankar at gmail com

 

14:49 matthew 

Mark as deprecated and set an expiry date.  Upstream has announced end
of life as 1st February 2021, so there should be plenty of time for
people to migrate to the current version: RT-5.0

https://bestpractical.com/blog/2020/7/announcing-end-of-life-for-request-tracker-42-and-request-tracker-for-incident-response-32-series
https://bestpractical.com/release-policy

 

07:51 danfe 

Sanitize COMMENT per Section 5.6 of the FreeBSD Porter's Handbook (part 5).

 

22:23 matthew 

Security update to 4.2.16

ReleaseNotes:	https://docs.bestpractical.com/release-notes/rt/4.2.16

MFH:		2019Q1
Security:	416ca0f4-3fe0-11e9-bbdd-6805ca0b3d42

 

18:09 matthew 

Update to 4.2.15

ChangeLog:	https://docs.bestpractical.com/release-notes/rt/4.2.15

 

14:58 danfe 

For ports under `www' category: remove redundant PKGMESSAGE assignment,
which is set appropriately by the b.p.m when `pkg-message' appears on
the SUB_FILES list.

 

18:57 matthew 

Update to 4.2.14

Remove patch files from the last round of security patches: these have
now been incorporated in the release.

Add license

Update to use some additional options-helpers features

ChangeLog:    https://docs.bestpractical.com/release-notes/rt/4.2.14

 

05:52 sunpoet 

Remove Perl core modules

- Bump PORTREVISION for dependency change

With hat:	perl

 

11:33 matthew 

Revert patch-config.layout to r354074 -- 'make makepatch' wiped out
the %%PREFIX%% substitution token.

Pointyhat to me.

This, along with r443668 needs MFH to 2017Q2

MFH:		2017Q2

 

06:45 matthew 

Security Update:

Add security patches from BestPractical.  See

http://lists.bestpractical.com/pipermail/rt-announce/\
2017-June/000297.html

MFH:		2017Q2
Security:	7a92e958-5207-11e7-8d7c-6805ca0b3d42

 

23:26 sunpoet 

Remove outdated PERL_LEVEL check

With hat:	perl

 

12:18 rene 

www/rt42: remove optional dependency on expired databases/p5-DBD-Oracle

 

12:51 mat 

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

 

07:29 matthew 

Upgrade to 4.2.13

 - regenerate patches with 'make makepatch'

ChangeLog:
http://lists.bestpractical.com/pipermail/rt-announce/2016-July/000288.html

 

11:36 matthew 

Remove CONFLICTS_INSTALL against rt38 which is long gone from ports.

Remove a stray ${PORTSDIR} that escaped mat's purge [1]

Reported by:	garga [1]

 

19:06 pi 

New port: www/rt44

RT is a battle-tested issue tracking system which thousands of
organizations use for bug tracking, help desk ticketing, customer
service, workflow processes, change management, network operations,
youth counselling and even more. Organizations around the world have
been running smoothly thanks to RT for over 10 years.

WWW: http://www.bestpractical.com/rt/

PR:		208229
Submitted by:	mikael.urankar@gmail.com

 

14:33 mat 

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

 

21:07 matthew 

Prepare for perl-5.22

  - Add dependency on www/p5-CGI conditional on perl version.  CGI is
    no-longer a core module with 5.22.

  - Make the default web server interface Apache + FCGI rather than
    Apache + mod_perl.  Current versions of mod_perl aren't compatible
    with perl-5.22

 

22:19 matthew 

Security update to 4.0.12

MFH:		2015Q3
Security:	83b38a2c-413e-11e5-bfcf-6805ca0b3d42

 

20:05 matthew 

Update to 4.2.11

ReleaseNotes:	https://www.bestpractical.com/release-notes/rt/4.2.11

 

21:36 matthew 

Security update to 4.2.10

     - Now requires p5-Encode >= 2.64 from the converters/p5-Encode
       port, as the version bundled with perl is too old.
     - New dependency p5-HTML-FormatExternal

There are database schema updates to apply, but these only affect
people using MySQL

ChangeLog:   https://bestpractical.com/release-notes/rt/4.2.10
Security
Advisory:	http://blog.bestpractical.com/2015/02/security-vulnerabilities-in-rt.html

MFH:		2015Q1
Security:	d08f6002-c588-11e4-8495-6805ca0b3d42

 

02:22 mat 

Catch up abusive uses of ${SITE_PERL}.

Sponsored by:	Absolight

 

13:08 matthew 

Make the port 'poudriere testport' clean

     - Remove ${STAGEDIR}/usr/local/www/rt42 which is unused
     - Add ${DATADIR}/{etc,lib,plugins} as empty directories: these
       are used by RT extensions.
     - Use @dir() to manage directories created under /var.  This will
       prevent the unconditional removal and replacement of the cache
       directories during updates, which results in those directories
       ending up with the wrong ownership.

PR:		195871
Submitted by:	me@nileshgr.com

 

15:18 matthew 

RT contains no compiled code, so code equivalent to USES=pgsql --
which adds a LIB_DEPENDS on libpg.so -- and similarly for USES=mysql
and USES=sqlite is actually wrong.  RT will inherit the correct
dependencies from p5-DBD-Pg, p5-DBD-mysql or p5-DBD-Sqlite.

 

13:08 mat 

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
Perl version, minimizing the upgrade when the major Perl version is changed.
It uses a version dependent directory for modules with compiled bits.

As PERL_ARCH is no longer needed in plists, it has been removed from
PLIST_SUB.

The USE_PERL5=fixpacklist keyword is removed, the .packlist file is now
always removed, as is perllocal.pod.

The old site_perl and site_perl/arch directories have been kept in the
default Perl @INC for all Perl ports, and will be phased out as these old
Perl versions expire.

PR:		194969
Differential Revision:	https://reviews.freebsd.org/D1019
Exp-run by:	antoine
Reviewed by:	perl@
Approved by:	portmgr

 

07:08 matthew 

Update to 4.2.9

ChangeLog:	https://www.bestpractical.com/release-notes/rt/4.2.9

 

18:30 matthew 

Fix permissions problem due to omitted @mode in pkg-plist.

PR:		194118
Submitted by:	Larry Rosenman

 

20:07 matthew 

Security update to 4.2.8

The SMIME integration has led to www/rt42 being vulnerable to
shellshock related exploits.

Also contains minor fixes to Oracle DB schema updates from 4.2.7.  No
changes for other RDBMS backends.

While here:

  - Drop @dirrmtry from pkg-plist (mostly) and use @dir() to set the
    permissions on ${LOCALBASE}/etc/rt42/

Release Notes:	http://bestpractical.com/release-notes/rt/4.2.8
MFH:		2014Q4
Security:	81e2b308-4a6c-11e4-b711-6805ca0b3d42

 

11:55 tijl 

Patch configure instead of aclocal.m4 to avoid USE_AUTOTOOLS

 

15:33 matthew 

Update to 4.2.7

       - USES_PGSQL -> USES+= pgsql
       - Now that the problems with UTF8 in the	DB have	been solved, switch
         back to depending on p5-DBD-Pg	rather than p5-DBD-Pg32

Note: this update required DB schema changes to be applied.  Please
follow the instructions in pkg-message.

 

09:46 matthew 

Update to 4.2.6

Note: For Postgresql users -- this version of RT requires a
down-graded copy of DBD::Pg which is supplied by the new
databases/p5-DBD-Pg32 port.  This may cause conflicts if you have
other consumers of p5-DBD-Pg installed.

ReleaseNotes:	http://bestpractical.com/release-notes/rt/4.2.6

 

03:34 adamw 

Add DOCS option to the remaining staged ports where PORTDOCS appears
in the plist.

 

08:30 matthew 

It's listed under 'bestpractical' in the official CPE dictionary.

 

06:31 matthew 

Add CPE settings

 

12:19 tijl 

Bump more ports that depend on libsqlite3.so:
- ports that set USE_SQLITE with the *_USE option helper
- ports that depend on libsqlite3 indirectly as reported by pkg rquery

Approved by:	portmgr (implicit)

 

05:42 matthew 

Update to 4.2.5

Release Botes:	http://bestpractical.com/release-notes/rt/4.2.5

Note on perl-5.20 support -- CGI.pm is being deprecated in perl CORE,
which may generate warnings.  Ultimately it will need to switch to a
separate p5-CGI port.  Recommended to stick with perl-5.18 or earier
on production systems for the time being.

 

23:15 matthew 

Correct error in plist -- reset to group wheel specifically rather
than the default, as otherwise this can sometimes result in files
being installed with the group ownership of the user running the
installation.

Submitted by:	bapt

 

16:45 matthew 

Update to 4.2.4

   - Rework pkg-plist based on 'make makeplist'

Release notes:	http://bestpractical.com/release-notes/rt/4.2.4

 

01:14 bdrewery 

- Fix plist to have proper 'rmdir DIR' ordering.
  Pkgng will not detect the directory otherwise. This was due to
  incorrectly advise in the check-stagedir.sh script, fixed in
  r351587

With hat:	portmgr

 

12:44 matthew 

lighttpd+mod_fastcgi and spawn-fcgi web deployment methods both incur
a dependency on p5-FCGI, not just apache+mod_fastcgi

 

06:36 matthew 

Update to 4.2.3

This is primarily a bugfix release.

Release Notes:	http://bestpractical.com/release-notes/rt/4.2.3

 

20:52 matthew 

Due to a denial-of-service vulnerability in www/rt42 versions 4.2.0 --
4.2.2 inclusive, require at least version 0.03 of
mail/p5-Email-Address-List.

It's this port which is vulnerable, but the essential fix is to update
p5-Email-Address-List.

MFH:		2014Q1
Security:	d1dfc4c7-8791-11e3-a371-6805ca0b3d42

 

14:32 matthew 

   * Fix up botched PGSQL dependencies
   * Add the missing HTML_DOC_DEPS
   * Use 'DEVELOPER' rather than 'DEV' consistently for that option
   * Since BUILD_DEPENDS is always going to be a super-set of
     RUN_DEPENDS for this port, simplify things by generating
     RUN_DEPENDS from the OPTIONS choices, and then just append that
     to the BUILD_DEPENDS.

 

19:00 matthew 

Update to 4.2.2

Note that this upgrade includes significant schema changes for mysql.
Users are advised to verify their backups carefully before upgrading.

ChangeLog:	  http://blog.bestpractical.com/2014/01/rt-422-released.html

 

22:05 matthew 

  * OPTIONS helpers
  * Install docs unconditionally to stage
  * DATADIR should be relative to $PREFIX, not $LOCALBASE
  * use CONFLICTS_INSTALL rather than CONFLICTS

MFH:	2014Q1

 

19:47 bdrewery 

- Chase r336083 and bump all ports using NO_ARCH so that users building
  their own packages and still on pkg 1.1.4 can upgrade.

With hat:	portmgr

 

22:38 matthew 

Mark all my architecture independent ports using shell/perl/PHP as
NO_ARCH=yes

While here, fix a few other niggles:

net/phpldapadmin -- remove indefinite article from COMMENT

www/p5-RT* -- fix comments referencing the different versions of RT

x11-fonts/gentium-{basic,plus} -- mention ${STAGEDIR} explicitly in the
  install targets; rework the handling of ${FONTPATH}

 

17:49 matthew 

- Make it possible to 'make stage' without needing superuser powers

- Make the saved configuation parameters for extensions match the
  equivalents from www/rt40 or www/rt38

- Set default DBA user to pgsql when backend database is chosen as
  postgresql.

 

07:20 matthew 

Step two of reconnecting www/rt42 with its history: svn cp ww/rt40
www/rt42 and reapply the changes.

Reported by:	bsam

 

00:27 matthew 

Fix CONFLICTS

 

00:11 matthew 

RT is a battle-tested issue tracking system which thousands of
organizations use for bug tracking, help desk ticketing, customer
service, workflow processes, change management, network operations,
youth counselling and even more. Organizations around the world have
been running smoothly thanks to RT for over 10 years.

WWW: http://www.bestpractical.com/rt/