16:55 Muhammad Moinur Rahman (bofh) 

x11-drivers/xf86-video-scfb: Moved man to share/man

Approved by:    portmgr (blanket)

    75ebe3b

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

13:19 Baptiste Daroussin (bapt) 

xorg: bump revision of drivers after xorg-server upgrade

The internal ABI has been bumped

    60acfbb

14:23 Tobias C. Berner (tcberner) 

x11-drivers: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Florent Thoumie <flz@freebsd.org>
  *  Gleb Smirnoff <glebius@FreeBSD.org>
  *  NIIMI Satoshi <sa2c@sa2c.net>
  *  lesi@FreeBSD.org

With hat:	portmgr

    ab8a40f

23:19 Larry Rosenman (ler) 

x11-drivers/xf86-video-scfb: Update Port

Per request of ray@

    b0a0685

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

23:20 grembo 

Unbreak on xorg-server 1.20.7 (and minor cleanup)

PR:		244353
Approved by:	manu

 

21:15 zeising 

Update xorg x11 servers to 1.20.7

Update xorg x11 servers to 1.20.7.  This updates x11-servers/xorg-server,
xephyr, xorg-dmx, xorg-nestserver, xorg-vbserver and xwayland.

Enable the UDEV backend by default, instead of the DEVD backend, for
autoconfiguration of input devices on FreeBSD 12 and later.
FreeBSD 11 lacks the needed support in base and will keep on using the DEVD
backend.
Support for the HAL backend is dropped completely, it has been deprecated
for a long time.
Update and improve the DEVD backend.
Add a pkg message about sysctl configuration that might be needed when using
UDEV.

Use the upstream fix for glamour issues.

Use evdev xkb rules by default in xwayland [2]

Add x11-drivers/xf86-input-libinput to the list installed by default by
x11-drivers/xorg-drivers.

Fix net/tigervnc-server and emulators/virtualbox-ose

Bump portrevision of all x11 drivers, as well as other ports dependent on
xorg-server.

This represents work by many people over a long period.  These include
wulf, ak, dumbbell, hselasky pete AT nomadlogic DOT org, jbeich, manu,
myself and possibly others (I tried to look through history, but might have
missed people. If so, I am sorry.)

PR:             196678 [1], 244129 [2]
Submitted by:   hselasky, wulf [1], jbeich [2]
Obtained
from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xserver-1.20
(in part)

 

16:32 manu 

x11-drivers/xf86-video-scfb: update to 0.0.5

Fixes building with recent version of Xorg.

PR:		241650
Submitted by:	rozhuk.im@gmail.com
Approved by:	x11 (bapt@)

 

21:56 zeising 

Switch all ports to use USES=xorg-cat

Change all ports to use USES=xorg-cat instead of the old XORG_CAT
Add USES=xorg and USES=gl as needed to x11@ ports

 

18:34 zeising 

Change x11/xorgproto to become a build dep

Change x11/xorgproto to become a build time dependency when added to
USE_XORG.  Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.

PR:		230909
Reviewed by:	eadler
Approved by:	portmgr (antoine)
Obtained
from:	https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run:	antoine
Differential Revision:	https://reviews.freebsd.org/D16906

 

18:41 zeising 

Switch to xorgproto instead of individual packages

Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto.  This update
tracks that change.

* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
  bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
  instead depend on xorgproto.  Bump portrevision.
* Delete the old *proto packages, update MOVED.

PR:		230023
Submitted by:	zeising
Approved by:	portmgr (antoine)
exp-run by:	antoine

 

14:34 rezny 

Add a check in the Probe function to verify we have a usable framebuffer
before claiming the device. This allows fallback to vesa to work correctly.

Assign this port to x11@ after discussion with ray@ on IRC.

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D9629

 

14:17 rezny 

Xorg-servers update to 1.18.4 with driver updates and revision bumps.

Update xf86-video-ati to 7.8.0
Update xf86-video-intel to 2.99.917.20170103
Update xf86-input-synaptics to 1.9.0
Update xf86-input-evdev to 2.10.5
Update xf86-video-r128 to 6.10.2
Update xf86-video-rendition to 4.2.6
New port: xf86-video-geode

PR:		214591,216269,214687,214593,214715,216276,216277,216278,216287,
		216288,216292,216298,214560,216299,216300,216301,216302
Approved by:	swills (mentor, portmgr)
Differential Revision:	https://reviews.freebsd.org/D9436

 

13:15 mat 

Github cleanup.

- Use the version tag instead of commit hash when they're the same.
- Remove unnneeded variables.
- Simplify go- ports when possible.
- Various fixes.

Sponsored by:	Absolight

 

07:45 kwm 

Xorg-server update to 1.17.2 with related driver updates and bumps.

Update fontproto to 2.1.3.
Update libXfont to 1.5.1.
Update xf86-input-keyboard 1.8.1.
Update xf86-input-vmmouse to 13.1.0.
Update xf86-input-void to 1.4.1.
Update xf86-video-chips to 1.2.6.
Update xf86-video-cirrus to 1.5.3.
Update xf86-video-mach64 to 6.9.5.
Update xf86-video-neomagic to 1.2.9.
Update xf86-video-r128 to 6.10.0.
Update xf86-video-s3virge to 1.10.7.
Update xf86-video-savage to 2.3.8.
Update xf86-video-siliconmotion to 1.7.8.
Update xf86-video-sis to 0.10.8.
Update xf86-video-trident to 1.3.7.
Update xf86-video-vesa to 2.3.4.

* All other xf86-* drivers where bump and/or patched to allow them to
  compile and work with the new xorg-server.
* The ATI-ums driver is removed because the API it depends on was
  removed from the xorg-server.
* Add patch to sunffb to make the lack of XAA non-fatal
  (not build/run tested due to lack of hardware).
* Remove the extra patches in xorg-server for arm. The code seems to
  support it now natively. Please file a bug if this is not the case.
* Update the xorg-server support in virtualbox-ose-additions for vboxmouse. [1]

Submitted by:	jkim@ [1]
Obtained from:	Graphics devel repo

 

20:24 mat 

Update ports in the remaining categories to not use GH_COMMIT.

With minor cleanups to make things simpler.

With hat:	portmgr
Sponsored by:	Absolight

 

23:03 dumbbell 

x11-servers/xorg-server: Update to 1.14

The X.Org server has been updated to 1.14. The changes it brings are described
in a post on the Graphics team blog:
http://blogs.freebsdish.org/graphics/2014/11/19/xserver-1-14-update-ready/

The most noticable change is the DEVD input device autodetection backend
which is enabled by default, replacing the HAL backend. The keyboard
layout configuration must be migrated from HAL's .fdi files to X.Org
files. The procedure is explained in the post mentionned above.

Several ports were removed with this update, mainly because they are not
compatible with the X.Org server anymore:
    o  nvidia-driver-71
    o  nvidia-driver-96
    o  xf86-input-egalax
    o  xf86-video-newport
    o  xf86-video-tga

PR:		155696, 181660, 183478 (partially fixed), 188640, 191331
Differential Revision:	https://reviews.freebsd.org/D1337
Submitted by:	ak (most of the work on the DEVD backend), dumbbell, kwm,
		zeising
Tested by:	Many people on freebsd-x11@ and IRC
Reviewed by:	kwm, portmgr (antoine)
Approved by:	kwm, portmgr (antoine)

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

09:23 antoine 

Attempt to unbreak

Reported by:	pkg-fallout

 

00:03 adamw 

Add USE_XORG=inputproto.

  CC       scfb_driver.lo
In file included from scfb_driver.c:53:
In file included from /usr/local/include/xorg/xf86.h:46:
In file included from /usr/local/include/xorg/xf86str.h:39:
In file included from /usr/local/include/xorg/scrnintstr.h:58:
/usr/local/include/xorg/dix.h:57:10: fatal error: 'X11/extensions/XI.h' file not
found
#include <X11/extensions/XI.h>

 

11:47 kwm 

Update to 0.0.4.

Fixed obtaining of Frame Buffer line byte size

Drop XORG_CAT it interferes with GITHUB macro's
Drop ONLY_FOR_ARCHs

Submitted by:	maintainer
Reviewed by:	maintainer

 

13:25 tijl 

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

 

18:28 zeising 

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well
as some drivers and utilities.

Bump portrevisions for xf86-* ports, as well as virtualbox-ose-additions due
to xserver version change.

Apart from these updates, the way shared libraries are handled has been
changed for all xorg ports, as well as libxml2 and freetype, which means
ltverhack is gone and as a consequence shared libraries have been bumped.
The plan is that this change will make library bumps less likely in the
future.
All affected ports have had their portrevisions bumped as a consequence of
this.

Fix some issues where WITH_NEW_XORG weren't detected properly on CURRENT.

Update instructions, hardware support, and more notes can be found on
https://wiki.freebsd.org/Graphics

Thanks to:	all testers, bdrewery and the FreeBSD x11@ team
exp-run by:	bdrewery [1]
PR:		ports/187602 [1]
Approved by:	portmgr (bdrewery), core (jhb)

 

23:13 eadler 

Fix ppc arch in ONLY_FOR_ARCHES

PR:		ports/187489
Submitted by:	jhibbits
Approved by:	ray (maintainer)

 

00:06 rene 

- Reroll distribution file and host it locally to match WRKSRC enforced
  by bsd.xorg.mk instead of using the directory layout generated by GitHub
- Use bz2 compression, default of bsd.xorg.mk
- Remove redundant USE_XORG definition (implied by XORG_CAT=driver)

Approved by:	maintainer (ray)

 

00:46 rene 

Add armv6 as allowed architecture.

OK from:	ray

 

23:37 rene 

Limit to arm/ppc/ppc64/sparc64

Submitted by:	maintainer (ray)

 

22:49 rene 

This package contains the X.Org xf86-video-scfb driver.
Framebuffer access via FreeBSD syscons.

On behalf of:	ray