Current status

Number of commits found XX: 82

In preparation of the update of glib remove the -reference ports

Those ports mainly concern old Gnome2 libraries, the behaviour of this infra
is not compatible with the meson build system (being used in newer version)
the documentation is provided otherwise in the other version

Drop build dependency on GNU m4.

m4 from base is able to do the job, if properly wrapped to mimic GNU m4

Differential Revision:	https://reviews.freebsd.org/D21835

Add orphaned file to plist. [1]

While here strip libraries and add USE=gnome

Reported by:	antoine@ [1]

The FreeBSD GNOME team proudly presents GNOME 3.28 for FreeBSD.

The offical GNOME 3.28 release notes can be found at
https://help.gnome.org/misc/release-notes/3.28/

Thanks to Antoine Brodin for running the exp-runs.

PR:		229761

Fix build with newer sigc++20

Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

Sprinkle some PORTSCOUT macros around to either mark ports:
 * ignore because there will not be any new releases.
 * check specific versions or ignore devel versions.

Add USES=libtool to accessibility/atkmm and bump dependent ports

Fixed slave ports building

Reported by:	pkg-fallout

Convert to USES=libtool:keepla tar:xz.

- Stage support

Fix pkgname collisions in gtk??[mm] ports.

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

Add an explicit dependency on pkgconf

Update to 2.24.4.

Trim header and update comments and pkg-descr.
Switch to USES=gmake pathfix, and use *mm components from USE_GNOME.

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

- update png to 1.5.10

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Update the glib and gtk stack to the lastest stable releases.
Add new ports for the new stable releases of gtk+-3.0.
Update vala to the newest stable release 0.12.1.

Thanks to pav@ for doing multiple exp-runs, and marcus@ for repo-copies.
Full contributors acknowledgment will be given in the GNOME 3 import.

Sync to new bsd.autotools.mk

Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/

This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.

This release features commits by avl, marcus, mezz and myself.

The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:

Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX

(Only the first 15 lines of the commit message are shown above )

Bump PORTREVISION and add USE_GETTEXT where missing.

PR:             147257

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

(Only the first 15 lines of the commit message are shown above )

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

(Only the first 15 lines of the commit message are shown above )

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

Presenting GNOME 2.24 for FreeBSD.

See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes.  On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs.  The documentation updates
to the website are forthcoming.

This release features commits by adamw, ahze, kwm, mezz, and myself.  It would
not have been possible without are contributors and testers:

Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen

(Only the first 15 lines of the commit message are shown above )

- Remove USE_GCC where it can be satisfied with base compiler on following
  FreeBSD versions: 5.3 and up, 6.x, 7.x, 8-CURRENT

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Update to 2.12.7

Update to 2.12.6.

Update to 2.12.5.

Update to 2.12.4.

Update to 2.12.3.

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

(Only the first 15 lines of the commit message are shown above )

Update to 2.10.11.

Allow these ports to build with GCC 4.2.

Approved by:    portmgr (implicit)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Update to 2.10.10.

Update to 2.10.9.

Update to 2.10.8.

Update to 2.10.7.

Update to 2.10.6.

Update to 2.10.5.

Update to 2.10.4.

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

- Add header in these *-reference ports.
- Fix a few of pkg-descr by chase the rename.
- Move all PORTREVISION and PORTEPOCH to top with ?=.
- Put USE_X_PREFIX back in, but under REFERENCE_PORT, and remove PREFIX? and
  USE_XLIB. This fix ports to use the correct mtree when you change the prefix,
  for example:

        Incorrect: (Without USE_X_PREFIX)
        ================================
        # cd /usr/ports/x11-toolkits/gtk20
        # make -V MTREE_FILE
        /etc/mtree/BSD.x11-4.dist
        # make PREFIX=/tmp/foo -V MTREE_FILE
        /etc/mtree/BSD.local.dist <-- Here...
        ================================

(Only the first 15 lines of the commit message are shown above )

Update to 2.8.8.

Update to 2.8.7.

Update to 2.8.6.

Move the gtkmm24 programming reference to the gtkmm24-reference port.

Update to 2.8.5.

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Fix plist (leftover %D prefix in @dirrmtry entry). [1]
- Remove obsolete USE_REINPLACE.

Reported by:    krismail [1]

Update to 2.8.3

-Update to 2.8.2.
-Using --disable-demos instead of patch to disable it.
-NOPORTDOCS no longer need a hack, using --disable-docs instead.

Switch to <target>:: convention for both patch-autotools and run-autotools,
to allow for easier overriding of these targets by port Makefiles, if
they need to.

Update to 2.8.1.

- Remove MASTER_SITE_LOCAL from MASTER_SITES since everything seems to work
  again.

- Remove MASTER_SITE_SOURCEFORGE

- Temp add MASTER_SITE_LOCAL to MASTER_SITES
  I can only fetch 14% from the main gnome ftp and no other gnome mirror
  has it as of 10:10EST

Update to 2.6.3.

Fix inter-library dependencies so dependands get properly linked.
This required for systems with pkgconfig 0.17+ installed.

Update to 2.6.2.

There's some problem with link stage for programs linking
against gtkmm24 on 4.x that's existed since at least 2.6.1.
I'm committing this update because it doesn't make the problem
any worse.

Update to 2.6.1.

Update to 2.6.0.  Note: this release is API and ABI compatible with
2.4.x, so a repocopy to gtkmm26 is not needed.

Update to 2.4.11.

Update to 2.4.8

Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.

Update to 2.4.6

Increase USE_GCC to 3.4 for those ports which compile with it.

Approved by:    portmgr

Fix plist.

Reported by:    pointyhat

Update to 2.4.5

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

- Fix examples build trigger.
- Axe yet more build but not install stuff.

Fix LATEST_LINK.

Update to 2.4.4

Add gtkmm 2.4.3 after repocopy from gtk--2, a C++ wrapper for GTK+,
Pango, Atk.

Number of commits found XX: 82

10 vulnerabilities affecting 79 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2021-03-05 21:21:29