09:44 antoine 

Deprecate python-gnome2 stuff

With hat:	portmgr

 

11:21 tobik 

x11*: Add missing USES={gl,gnome,mate}

 

17:05 mat 

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

 

12:38 bapt 

Make libgnome and libgnomeui not implying esound dependency

It has been a while both does not depend anymore on esound, before this change
esound dependency was wrongly added to plenty of packages which actually does
not depend on it.

While here:

- audio/glame: remove esound support
- games/monkeybubble: add an explicit dependency on esound
- sysutils/gnome-schedule: add en explicit dependency on pkg-config
- comms/kb: add missing dependency on pkgconfig
- x11-toolkits/libgnomeui:
  * update to 2.4.5
  * use USES=localbase

 

11:10 antoine 

Reduce dependency on the python2 metaport

PR:		225752
Submitted by:	Yasuhiro KIMURA

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

14:33 mat 

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

 

15:03 tijl 

By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same
Makefile.am and clean up the port Makefile.

japanese/scim-honoka: Tries to hide all symbols that start with an
underscore, but because this library is written in C++ all symbols start
with _Z so it ends up hiding everything.  Just don't hide anything at all
like the textproc/scim configure script does.

multimedia/schroedinger: Apply an upstream patch.

textproc/scim-input-pad: Same as japanese/scim-honoka.

PR:		201922
Approved by:	portmgr (antoine)
Exp-run by:	antoine

 

10:15 mat 

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

 

19:37 marino 

3 ports categories: Remove $PTHREAD_LIBS

Categories: editors, x11, x11-toolkits

approved by:	PTHREAD blanket

 

18:16 mva 

- Convert ports from korean/, shells/, x11/, x11-clocks/, x11-fm/,
  x11-fonts/, x11-toolkits and x11-wm to new USES=python

Approved by:	portmgr (implicit)

 

14:50 tijl 

Support LIBS like LDFLAGS.

- Add LIBS="${LIBS}" to MAKE_ENV and CONFIGURE_ENV.
- Add an option helper for LIBS.
- Adjust all ports that already use LIBS.  Also remove references to
  PTHREAD_CFLAGS and PTHREAD_LIBS while here.
- Some ports did not support having a LIBS environment variable and
  required additional patches.

Somewhat simplified a linker command line looks like:

${CC} ${src_LDFLAGS} ${LDFLAGS} ${src_LIBS} ${LIBS}

where src_LDFLAGS and src_LIBS are controlled by upstream and LDFLAGS and
LIBS can be controlled by us.  If possible -L and -l flags need to be
added to LIBS to make sure they appear after any -L and -l flags set by
upstream.  Many ports currently add -L${LOCALBASE}/lib to LDFLAGS but this
may appear too early on the command line causing installed libraries to
be linked in instead of freshly built ones.

Additional changes:
benchmarks/netio: Replace WITH_IPV6 with an IPV6 option.
comms/gnokii: Replace some patches with USES=pathfix.  Also remove -fPIC.
graphics/gimageview: USES=libtool and install desktop file in DESKTOPDIR.
graphics/visionworkbench: Remove FreeBSD 7 support.
multimedia/libmovtar: New LIB_DEPENDS syntax.
multimedia/opencinematools: Use standard do-build.
net/siproxd: USES=libtool:keepla (port actually needs .la files for plugins)
net-mgmt/nagios: Remove -fPIC.
net-mgmt/nagios4: Remove -fPIC.
print/cups-base: Only add -lssp_nonshared on i386 and OSVERSION < 1000036.
security/p11-kit: Replace PTHREAD_LIBS in CONFIGURE_ENV with
ac_cv_func_pthread_mutexattr_init=no in CONFIGURE_ARGS.  This skips a test
in configure that falsely detects pthread_mutexattr_init in our libc.
sysutils/dar: Fix iconv detection.
x11/rxvt-unicode: Remove -lstdc++ and patch configure to remove a FreeBSD
hack and use $CXX as linker as on other platforms.

PR:		190592
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

13:25 tijl 

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

 

09:35 bapt 

Support stage
respect EXAMPLES

 

21:00 rene 

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

 

17:05 kwm 

Restrict python to -2.7

Submitted by:	mva@

 

23:57 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

 

12:13 bapt 

Add an explicit dependency on pkgconf

 

18:10 ak 

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

 

05:26 dinoex 

- update png to 1.5.10

16:35 mezz 

555 -> 755 for doc directories.

PR:             ports/167119
Submitted by:   bapt

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

19:56 olgeni 

Bump PORTREVISION in a few more ports affected by the libgcrypt
upgrade (they have references to libgcrypt.so.16).

17:15 marcus 

Add more USE_GETTEXT macros, and bump PORTREVISIONs.

Reported by:    amdmi3

21:19 kwm 

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

This release features commits by avl, ahze, bland, marcus, mezz, and myself.

The FreeBSD GNOME Team would like to thank Anders F Bjorklund for doing the
initual packagekit porting.

And the following contributors & testers for there help with this release:
Eric L. Chen
Vladimir Grebenschikov
Sergio de Almeida Lenzi
DomiX
walder
crsd
Kevin Oberman
Michal Varga
Pavel Plesov
Bapt
kevin

and ITetcu for two exp-run

PR:     ports/143852
        ports/145347
        ports/144980
        ports/145830
        ports/145511

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

20:06 marcus 

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

Other major improvements include an updated HAL with better volume
probing code, ufsid integration, and support for volume names containing
spaces (big thanks to J.R. Oldroyd); a new WebKit; updated AbiWord;
an updated Gimp; and a preview of the new GNOME Shell project (thanks to
Pawel Worach).

The FreeBSD GNOME Team would like to that the following additional
contributors to this release whose patches and testing really helped
make it a success:

Andrius Morkunas
Dominique Goncalves
Eric L. Chen
J.R. Oldroyd
Joseph S. Atkinson
Li
Pawel Worach
Romain Tartière
Thomas Vogt
Yasuda Keisuke
Rui Paulo
Martin Wilke
(and an extra shout out to miwi and pav for pointyhat runs)

We would like to send this release out to Alexander Loginov (avl) in
hopes that he feels better soon.

PR:             136676
                136967
                138872 (obsolete with new epiphany-webkit)
                139160
                134737
                139941
                140097
                140838
                140929

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

03:58 marcus 

Update to 2.26.1.

05:56 marcus 

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

01:36 araujo 

- Use GNOME macro instead of ${MASTER_SITE_GNOME}, remove
  MASTER_SITE_SUBDIR when possible.

PR:             ports/125243
Submitted by:   pgollucci
Reworked by:    myself
Tested on:      pointyhat exp-run (pav)

05:22 marcus 

Presenting GNOME 2.24 for FreeBSD.

See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes.  On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs.  The documentation updates
to the website are forthcoming.

This release features commits by adamw, ahze, kwm, mezz, and myself.  It would
not have been possible without are contributors and testers:

Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen
Joseph S. Atkinson
Kris Moore
Lapo Luchini [7]
Nikos Ntarmos
Pawel Worach
Romain Tartiere
TAOKA Fumiyoshi [3]
Yasuda Keisuke
Zyl
aZ [4]
bf [2] [5]
Florent Thoumie
Peter Wemm
pluknet

PR:             125857 [1]
                126993 [2]
                130031 [3]
                127399 [4]
                127661 [5]
                124302 [6]
                129570 [7]
                129936
                123790

18:08 marcus 

Update to 2.22.1.

14:16 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

03:50 marcus 

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

04:34 mezz 

Update to 2.20.1.

23:37 marcus 

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for
their work on porting modules and testing the whole ball of wax on
pointyhat (respectively).

The FreeBSD GNOME team would also like to thank our various testers and
contributors:

Yasuda Keisuke
Frank Jahnke
Pawel Worach
Brian Gruber
Franz Klammer
Yuri Pankov
Nick Barkas
Cristian KLEIN
Tony Maher
Scot Hetzel
Martin Matuska (mm)
Benoit Dejean
Martin Wilke (miwi)
(And anyone else I may have missed)

PRs fixed in this release:

111272, 113470, 115995, 116338

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

13:20 marcus 

Update to 2.18.2.

04:12 marcus 

Update to 2.18.1.

05:14 marcus 

Presenting GNOME 2.18 for FreeBSD.  GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features.  Not that it doesn't have its share of new and exciting
items.  See http://www.gnome.org/start/2.18/ for all the goodies in
this release.

GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.

12:43 ahze 

Update to 2.16.2

08:35 marcus 

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,
jylefort and marcus have completed work on a port of HAL to FreeBSD.  This
will allow FreeBSD to take advantage of closer hardware interaction such
as auto-mounting CD-ROMs, USB drives, and music players; auto-playing
audio CDs; and managing laptop power consumption.

But where would this all be without our loyal testers and contributors?
Therefore, the FreeBSD GNOME team would like to thank the following users:

Phillip Neumann <pneumann@gmail.com>
tmclaugh
mux
Yuri Pankov <yuri.pankov@gmail.com>
chinsan
Thomas <freebsdlists@bsdunix.ch>
Brian Gruber <knightbg@yahoo.com>
Franz Klammer <klammer@webonaut.com>
Dominique Goncalves <dominique.goncalves@gmail.com>
Pascal Hofstee <caelian@gmail.com>
Yasuda Keisuke <kysd@po.harenet.ne.jp>
backyard <backyard1454-bsd@yahoo.com>
Andris Raugulis <endrju@null.lv> <endrju@null.lv>
Eric L. Chen <d9364104@mail.nchu.edu.tw>
Pawel Worach <pawel.worach@gmail.com>
QuiRK on #freebsd-gnome
Shane Bell <decept0@gmail.com>
luigi
sajd on #freebsd-gnome
sat
Chris Coleman <chrisc@vmunix.com>
kaeru on #freebsd-gnome
crsd_ via irc.freenode.org/#FreeBSD-GNOME
Joel Diaz <joeldiaz@mac.com>

Enjoy!

Approved by:    portmgr (implicit, kris)

12:06 mezz 

devel/py-orbit2 -> devel/py-orbit

Rename this ports to use the real vendor package name. The advantage of this
is to allow our users' keyword search works and easier for users to file the
Bugzilla report when they use our name of ports. Debian, Gentoo, NetBSD and
other OSs have the correct package name, but not in our ports tree.

My team, FreeBSD GNOME Team, have agreed with it.

As for x11-toolkits/py-gnome2, chase the rename.

04:52 ahze 

- Pet portlint
- Remove empty patch

05:52 marcus 

Update to 2.12.4.

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

17:11 marcus 

Update to 2.12.3.

02:59 marcus 

Update to 2.12.2.

06:27 marcus 

Update to 2.12.1.

11:15 marcus 

Update to 2.10.0.

05:26 marcus 

Update to 2.6.2.

17:18 kwm 

Update to 2.6.1.

Approved by:    pav (mentor)

22:51 marcus 

Update to 2.6.0.

18:59 mezz 

- Update to 2.0.3.
- Remove 'py-' from the PORTNAME and add PKGNAMEPREFIX=${PYTHON_PKGNAMEPREFIX}.
- Change DIST_SUBDIR to gnome2.
- Remove patch-configure and use libtool 15.
- Chase the current bsd.gnome.mk, pygtk2.

Reviewed by:    marcus

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

04:27 marcus 

Update to 2.0.2.

03:31 marcus 

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

05:10 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

22:34 marcus 

Don't call a non-existent pkg-install.

Reported by:    Mike Harding <mvh@ix.netcom.com>

03:31 marcus 

Add CONFLICTS for py-gnome and py-gnome2 on each other.

Reported by:    Tom McLaughlin <tmclaugh@sdf.lonestar.org>

05:26 marcus 

Update to 2.0.0.

PR:             56397
Submitted by:   Jeremy Messenger <mezz7@cox.net>

22:43 adamw 

Update to 1.99.18.

Note that all the module so's have changed names AGAIN.

03:13 marcus 

Fix build with new py-gtk2.

Submitted by:   Jeremy Messenger <mezz7@cox.net>

20:06 marcus 

* Add a missing dependency on py-orbit2
* Convert to new GNOME infrastructure

Reported by:    bento

07:58 marcus 

Update to 1.99.16.

Submitted by:   Mezz bsdforums.org <reigncracks@hotmail.com>

21:42 marcus 

Add missing dependencies on libzvt and gnomepanel.

Reported by:    bento

18:04 marcus 

Add py-gnome2 after a repo copy from py-gnome.  py-gnome2 offers Python
bindings for GNOME 2.