19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

15:17 Christian Weisgerber (naddy) 

audio/opus: bump consumers after update to 1.4

    feb1fa3

11:15 Loïc Bartoletti (lbartoletti) 

PyQt: Update to latest versions

- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7

PR:		269751
Exp-run by:	antoine

    6d3a647

06:41 Loïc Bartoletti (lbartoletti) 

*/*: Update PyQt, Sip, QSCintlla2

PR:		267203
Exp-run by:	antoine

    9f4f331

10:20 Felix Palmen (zirias) 

Mk/Uses: always use colon for build/run suffix

Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.

Document in CHANGES.

PR:			266034
Exp-run by:		antoine
Approved by:		tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D36349

    ddae4e9

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

05:22 Loïc Bartoletti (lbartoletti) 

devel/qscintilla-qt5: Update to 2.13.2

Change:
  - https://riverbankcomputing.com/news/QScintilla_2.13.2_Released

    8f81938

17:39 Loïc Bartoletti (lbartoletti) 

devel/py-qt5, devel/py-sip: Update versions

- Update sip to 6.5.1
- Update PyQt5 to 5.15.6
- Update PyQtChart, PyQtNetworkAuth and PyQtWebengine to 5.15.5
- Update PyQtSip to 12.9.1
- Update PyQtBuilder to 1.12.2
- Add ${_MAKE_JOBS} for pyqt.mk (reported by Tatsuki Makino)

PR:		261685
Exp-run by:	antoine

    2d8f8573

20:12 Loïc Bartoletti (lbartoletti) 

*/*: Update qscintilla2 to 2.13.1

Changes:
  - https://riverbankcomputing.com/news/QScintilla_2.13.1_Released

    354d8cf

06:12 Loïc Bartoletti (lbartoletti) 

PyQt: Update sip to 6.5.0, reintroduce sip4 and simplify PyQt framework.

SIP:
As mentioned in the update from sip to sip5, this is a transitional version
to remove what is deprecated in sip4.
Sip6 completely removes the deprecated parts.
Unfortunately, some ports — mostly cura things — can not use sip6, so we
reintroduce sip4.

PyQt:
At the same time, we took the opportunity to simplify PyQT and propose only one
package as for devel/pyside2. */py-qt5-* have been merged — excepted chart,
networkauth and webengine — into devel/py-qt5-pyqt.

This allows us to be in adequacy with the packages that the author of these
libraries proposes, namely:

PyQt - devel/py-qt5-pyqt
PyQt-Charts - x11-toolkits/py-qt5-chart
PyQt-NetworkAuth – net/py-qt5-networkauth
PyQt-WebEngine – www/py-qt5-webengine
SIP – devel/py-sip
py-sip - devel/py-qt5-sip
PyQt-builder - devel/py-qtbuilder
Qscintilla - devel/py-qt5-qscintilla2

Reviewed by:	diizzy, kde
Tested by:	kai, rhurlin, arrowd, madpilot
Approved by:	makc, tcberner, kde
Differential Revision:	https://reviews.freebsd.org/D33237
Exp-run by:	antoine

    4f0a5e1

18:55 Loïc Bartoletti (lbartoletti) 

*/*: PyQt Update qscintilla2 to 2.13.0 and py-qt5-sip to 12.9.0

Changes:
  - https://riverbankcomputing.com/news/QScintilla_2.13.0_Released
  - https://www.riverbankcomputing.com/hg/sip/raw-file/tip/NEWS
PR:	257308
Exp-run by:	antoine

    8b9c482

12:36 Loïc Bartoletti (lbartoletti) 

devel/qscintilla2: Update to 2.12.1

Changelog:
	https://riverbankcomputing.com/news/QScintilla_2.12.1_Released

PR:		257002
Exp-run by:	antoine

    9713ff9

18:53 Kevin Bowling (kbowling) 

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

    da3162c

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

06:49 lbartoletti 

PyQt5: Update PyQt5 to 5.15.3, QScintilla2 to 2.12.0, py-qtbuilder to 1.9.0

* PyQt5: update to 5.15.3

This is a minor feature and bug-fix release. There are corresponding releases of
the other PyQt5-related packages.

 - Added the missing QImage.setAlphaChannel().
 - Support for the QtNetworkAuth library has been moved to a separate
PyQtNetworkAuth package.
 - Wheels no longer bundle the corresponding Qt libraries and instead
automatically install them from an external wheel.

* QScintilla2: update to 2.12.0

This adds support for Qt6 and removes support for Qt4.

 - Change the new distname (again)i due to a conflict
 - Use the new sip-build system

* devel/py-qtbuilder: update to 1.9.0
* devel/py-sip: fix flavor for sip-distinfo

PR:		253865
Exp-run by:	antoine

 

19:03 lbartoletti 

Update qscintilla2 to 2.11.6

 

14:05 rene 

Remove empty PY_ENUM34 from ports using Python 3.6+

 

16:13 lbartoletti 

PyQt: fix flavors

py-qt modules require sip-module to build, unfortunately, it is hardcoded and
links to the default python version.

There is no option to pass it in like sip binary, so we need to patch
configure.py file.

Reported by:	fluffy
Approved by:	fluffy

 

20:03 lbartoletti 

Update Qt/PySide2 to 5.15.2 / PyQt to 5.15.1 / SIP to 5.4.0
This commit combines several updates.

- Update Qt to 5.12.2
- Update PyQt to 5.15.1
- Since PySide 5.15.1 is broken with Qt 5.15.2, so PySide and Shiboken are also
updated to 5.15.2.
- Update sip to 5.4.0

SIP is a collection of tools  to create Python bindings for C and C++ libraries
and used by PyQt and wxPython. There are some changes with sip5 [1]:
- python 3.5+ is required
- sip drops support of old deprecated methods as sipdistutils & cie.
- this version breaks also PyQt5 extension ABI. SIP files will be installed in
${PYTHON_SITELIBDIR}/PyQt${_PYQT_VERSION}/bindings
- some ports will use the new pyqtbuilder package with the pyproject.toml setup.
Instead if the project have a setup.py, you should use sip-build to build it.
- if a port needs sip, it should also needs pysip. BTW, py-qt5-core requires
pysip, so that should be enough for PyQt packages.

List of ports impacted by this change. Most of the patches have been integrated
or are in the process of being integrated upstream:

- devel/libsavitar
- graphics/py-python-poppler-qt5
- net-im/scudcloud
- net/libarcus
- print/py-frescobaldi
- science/py-veusz
- graphics/qgis and graphics/qgis-ltr
- deskutils/calibre

A special note regarding calibre. New versions require sip>=5, we update it to
the latest version (thanks to madpilot@)

science/scidavis will remove the PyQt binding soon and there is no patch
planned, so we remove the python option (ok makc@)

While here, convert some ports to USE_PYQT (cad/cura, cad/uranium, devel/eric6,
...)

Thanks to tcberner and adridg!

[1] https://www.riverbankcomputing.com/static/Docs/sip/

PR:                250853
Exp-run by:        antoine

 

15:50 lbartoletti 

Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5

- Update PyQt to 5.15.0, py-sip to 4.19.24 and qscintilla2 to 2.11.5
- Use pypi for PYQT [1]
- Add devel/py-qt5-sip (Don't use it for now. It will be used in future updates
of PyQt with py-sip >= 5)
- Add missing py-qt5 ports: comms/py-qt5-sensors, devel/py-qt5-location,
devel/py-qt5-remoteobjects, net/py-qt5-networkauth
- Strip libs
- Refactor *_PATH and *_PORT parts

[1] RiverBankComputing doesn't offer links to download latest version of some
ports

PR:		247369
Reviewed by:	tcberner
Differential Revision:	https://reviews.freebsd.org/D25749
Exp-run by:	antoine

 

07:59 fluffy 

x11-toolkits/py-qt5-chart: Add extra PyQt5 module from Rivervank Computing

PyQtChart is a set of Python bindings for The Qt Company's Qt Charts library.
The bindings sit on top of PyQt and are implemented as a single module.