Current status

Number of commits found XX: 36

Deprecate py-wxPython28 and py-wxPython30 ports

With hat:	portmgr

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

Remove superfluous linefeeds and fix some other minor whitespace bugs.

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the

(Only the first 15 lines of the commit message are shown above )

Remove no-op WX_UNICODE

Approved by:	portmgr (blanket)

- Fix shebangs

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

graphics/py-opengl{-accelerate}: 3.0.1 -> 3.1.0, change to PyPI naming

- upgrade fixes the use of the port
- py-opengl -> py-PyOpenGL
- py-opengl-accelerate -> py-PyOpenGL-accelerate

PR:		205472
Submitted by:	matthew@reztek.cz
Reviewed by:	koobs

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

- Use DISTVERSIONPREFIX instead of DISTNAME
- Use WRKSRC_SUBDIR instead of WRKSRC

Remove ansi version fo wxGTK 2.8 and only keep the unicode version

All applications in the ports tree works correctly with unicode version of wxGTK

Newer version of wxGTK are unicode only (3.0+)

Note that now WX_UNICODE macro is noop

- Convert ports from korean/, shells/, x11/, x11-clocks/, x11-fm/,
  x11-fonts/, x11-toolkits and x11-wm to new USES=python

Approved by:	portmgr (implicit)

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Introduce x11-toolkits/py-wxPython30

x11-toolkits/py-wxPython28 was been modified to do not install wxversion python
files which conflict with wxPython30. Instead a new port has been created
(x11-toolkits/py-wxPython-common) which only installs wxversion and wx.pth
responsible for selecting the wxPython version.

Stage support has been added to all related ports.

Maintainership has been reset to python@.

The final goal is to make all ports use wxPython30 so we can remove wxPython28.

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

Fix pkg name collisions

Use setuptools for all Python ports.

Setuptools is the preferred method to manage Python distributions after
many changes to the packaging ecosystem over the past couple of years.

Only ports using USE_PYDISTUTILS= yes are affected by this commit, ports using
USE_PYDISTUTILS= easy_install remains the same however this usage is now
deprecated and should be converted to USE_PYDISTUTILS= yes.

Some Python distributions do not work with setuptools out of the box because
they extend the install command from distutils and not setuptools, and
so they need to be patched accordingly.

pip (which leverages setuptools) works around the issue by using eggs, however
we want to get rid of those as well, as support for "flat" installation is

(Only the first 15 lines of the commit message are shown above )

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui

(Only the first 15 lines of the commit message are shown above )

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11-toolkits)

Add an explicit dependency on pkgconf

Approved by:	portmgr (bapt)

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

- update png to 1.5.10

- Updated to 2.8.12.1
    ChangeLog:
    http://www.wxpython.org/recentchanges.php (scroll to 2.8.10.1 - 2.8.12.1)
- Start storing distfile in distfiles/python
- Removed stale patch (patch-wxpython-fedora11)

PR:             ports/161693
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>
Approved by:    Neal Nelson <neal@nicandneal.net> (maintainer)

Update to 2.8.10.1.

PR:             ports/148782
Submitted by:   myself
Approved by:    maintainer, tabthorpe (mentor)
Obtained from:  Fedora (API patch)

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Switch SourceForge ports to the new File Release System: categories starting
with X

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update lang/python26 and make Python 2.6.2 to the default Python version

Tested by:      3 pointyhat runs
Thanks to:      pav, gahr, lwhsu, mva, amdmi3

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to version 2.8.7.1.

PR:             ports/118919
Approved by:    Neal Nelson <neal@nelson.name> (maintainer)

Remove always-false/true conditions based on OSVERSION 500000

- Complete repocopy of x11-toolkits/py-wxPython28,
  x11-toolkits/py-wxPython28-common and x11-toolkits/py-wxPython28-unicode,
  applying the corresponding patches.
- Add PYDISTUTILS_NOEGGINFO to fix plist issues [1].
- Integrate with bsd.wx.mk: the noticeable difference is that ports using
  USE_WX=2.6+ and WX_COMPS=python will be built from now on with wxWidgets
  2.8, which was previously restricted for these ports because of the lack of
  the "python" component for version 2.6 [1].

PR:             ports/115349, ports/115350, ports/115351
Submitted by:   Neal Nelson <neal@nelson.name>
Reworked by:    alepulver (myself) [1]

Number of commits found XX: 36

15 vulnerabilities affecting 99 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2021-03-04 19:50:49